Good afternoon Edwin, I do like your bare handed inspection of the substrate prior to basecoat. Hands are very sensitive to small imperfections. Thanks for another informative video. It all helps us get better paint work out the door. Have a good weekend.
It's just a cheap Brazilian VW Fox but still I would have blended the colour in on the door. I don't like edge to edge paint jobs, they always come back to bite you in the arse. Can I suggest you show the job once the masking has been removed so as to see how it matches up with the rest of the car.
@@FlorianVandeer1995 You're right the adverts cut off the final seconds of the video but I've looked at it now and the colour is a shade too light so my case for a blend in stands. If that job was done on my car, I wouldn't accept it or sign off on it.
When I start a job, I always clean my overall first, after the gun. When I blow the car i do around the paint jobs area, everywhere and I always blowing in one destination, otherwise when you blow the dust go to the clean place. I clean the plastic as well, I need if you want a good paint job. Then, I clean with the sticky without air. If I finished the basecoat I repeat again. Half side, full paint job, does not matter I dont have too mutch. Yeah, okey it depents a lot a things...
If you clean it well with sulicon remover after with alcohol you can spray a heavy first coat and you don’t see the “crater” what did you sad. Is my opinion.
Live your work it would be awesome if you can work on your audio and explanation of it could be more clear because we watch the videos for info and that's key
Eine frage was bringt es nach dem Klarlack Staub Einschluss rausholen musst doch sowieso raus Schleifen Polieren???? Oder polierst du danach nicht mehr läst du es so ?????
Пацаны русскоязычные переведите .Там в конце переход по лаку рыжий перелил разбавителем по переходу за тем поменял банку и повторно перелил переход еще какой-то фигней .кто знает что это было ,напишите.
Один из способов перехода. В готовый лак добавляют на объем 50% растворителя перехода, наносят на распыл лака т.к он жидкий очень он формирует шагрень и распыл получается еще тоньше. Затем наносят чистый растворитель переходов , уже на тонкий распыл, он повторяет и растекается по старой шагрень та что переход практически отсутствует. Остается палернуть. + переход практически не виден, шагрень без обрывом. - для распыла необходимо большой участок матировать , обязательно оставлять шагрень и не оставлять царапины
Orgulho de ver um carro desenvolvido no brasil,projeto brasileiro fabricado em São José dos pinhais exportado pra europa.poucos carros fabricados aqui no brasil conseguiram ser exportados para europa
This is Standoblue Waterborne. He sprayed Colorblend in the blend area prior to spraying his coat and a half of color. It's basically clear waterborne basecoat. Similar to Standox solvent fade out thinner. the difference is you have to blend into it while its wet. this eliminates dry overspray.
I hate seeing guys clear blend that top sail panel! Prep that 4 minutes worth of work and spend 5 dollars more clear to make a legit job! Also no door color blend? Just butt matching paint? This is almost a good job. Almost.
at 10:53 all he's doing is blowing dust on the paint never do that let it dry on it's own and he did not blend the door not good this guy is in a hurry i dislike this
This was probably a customer pay instead of an insurance job. Customer pay job's are usually given the choice to blend but they would have to pay more so they usually decline with the understanding that there could be a slight variation in color. I'm guessing that's why he didn't blend the door.
If you have to paint 3-4 cars each day, you cant let the paint flash of by itself. Other than that, he blew upwards . Blowing waterborne saves so much time!
Good afternoon Edwin, I do like your bare handed inspection of the substrate prior to basecoat. Hands are very sensitive to small imperfections. Thanks for another informative video. It all helps us get better paint work out the door. Have a good weekend.
Thanks Steve, you are totally right👍
It's look like colour mismatch but good job bro love to see you
Your tips very nice best thank you for video thank you leader thank you
Very good job!!
It's just a cheap Brazilian VW Fox but still I would have blended the colour in on the door. I don't like edge to edge paint jobs, they always come back to bite you in the arse. Can I suggest you show the job once the masking has been removed so as to see how it matches up with the rest of the car.
@@FlorianVandeer1995 You're right the adverts cut off the final seconds of the video but I've looked at it now and the colour is a shade too light so my case for a blend in stands. If that job was done on my car, I wouldn't accept it or sign off on it.
@@deplorablebristolian this guy knows his job. He knows He had to blend into the door but che customer probably won't pay for it
Nice one bro I really like your videos
Owsm bro nice work
for those who complains about hard to understrand what he is saying - put volume to max :) :)
good job im fan of your work
Lingua italiana
Voglio inserire. Lingua italiana
Beautiful job , perfect 100% , respect
Nice job
very nice job
Hola amigo desde Perú excelente acabado enseñanza Felicidades.
Show de bola parabéns pelo vídeo nota 💯✖️💯🇧🇷
Really awesome job .
Thanks for sharing your experiences and information .
Very very good painter
Thank you for great tips
When I start a job, I always clean my overall first, after the gun. When I blow the car i do around the paint jobs area, everywhere and I always blowing in one destination, otherwise when you blow the dust go to the clean place. I clean the plastic as well, I need if you want a good paint job. Then, I clean with the sticky without air. If I finished the basecoat I repeat again. Half side, full paint job, does not matter I dont have too mutch. Yeah, okey it depents a lot a things...
If you clean it well with sulicon remover after with alcohol you can spray a heavy first coat and you don’t see the “crater” what did you sad. Is my opinion.
Muy buen trabajo. Una pena que no este subtitulado al español. Desde Rep. Argentina saludos🇦🇷 !
Amazing job
Hi brother good work
Live your work it would be awesome if you can work on your audio and explanation of it could be more clear because we watch the videos for info and that's key
It's going to be a very good job
It's all double Dutch to Me ., x. Its like watching Paint dry ! P.s. Good Job. 👍
Eine frage was bringt es nach dem Klarlack Staub Einschluss rausholen musst doch sowieso raus Schleifen Polieren???? Oder polierst du danach nicht mehr läst du es so ?????
Good maan good wark
Du bist der beste in der Welt ✌✌👍👍
Hi good job ! Why not to use black or dark blue filler??
Good question! I noticed a bit difference at the end paint result, but still, the man did excellent job👏👍
Пацаны русскоязычные переведите .Там в конце переход по лаку рыжий перелил разбавителем по переходу за тем поменял банку и повторно перелил переход еще какой-то фигней .кто знает что это было ,напишите.
Thinner/blender
On razbavil ego 1:1
Vrode vse
Ne znaju che on ispolzoval iz pervoj banki
Один из способов перехода.
В готовый лак добавляют на объем 50% растворителя перехода, наносят на распыл лака т.к он жидкий очень он формирует шагрень и распыл получается еще тоньше.
Затем наносят чистый растворитель переходов , уже на тонкий распыл, он повторяет и растекается по старой шагрень та что переход практически отсутствует.
Остается палернуть.
+ переход практически не виден, шагрень без обрывом.
- для распыла необходимо большой участок матировать , обязательно оставлять шагрень и не оставлять царапины
Super👍💪🥇🇷🇸
Good
Orgulho de ver um carro desenvolvido no brasil,projeto brasileiro fabricado em São José dos pinhais exportado pra europa.poucos carros fabricados aqui no brasil conseguiram ser exportados para europa
Oye yocono aun pintor brasilero i era malito parapinta si que a no gusgar a los demas
What type / brand of bledner do you use?
In México that car is named Lupo!!!
There is also a lupo, a fox is another model
Where are they from you guys? I thought the Vw Fox was only a latam car
cool
klinkt goed, Wat vraag je voor een BMW e46 sedan opnieuw te spuiten Kleur: orient blue
Rond de 3500
£1800 kontant😉
Danke schon 😊
Superbe travail toujours rien à redire 👍
Badass...👌🍺👍
Good job looks nice and straight no ripples
Le auto vanno smontate è non si sfuma un metro di piantone il resto tutto ok
Parabéns trabalho bem feito
What psi for clear?
❤❤❤❤❤❤😍
صرلك ساعه عم تلحمس للقطعه يازلمي انا بنص ساعه بخ سياره كاملي،😄😄
can I know the basic opaque and transparent measurements? 1.4 and 0.8 mm?
Both 1.2mm
@@DutchCarPainter grazie
Nice jop man, Respekt👌💪
I'm car painter from bangladesh
What kind of paint is found in modern cars ???
Waterborne
I mean like Muttalk coating, rakshir etc ...
wat kost een stukje achterspatbord lakken als ik het voorwerk zelf doe. Gaat om 40x 4 a 5 cm breed
50euro
@@DutchCarPainter Oww dat valt nog reuze mee. Daar ga ik mee bezig,stuur je wel een berichtje als ik eraan toe ben :) Thanks
Ok
Color a bit lighter as door
👏👏👏👏👍👍 👍, show
if i was a pro i would not be watching you, i thought that was the whole point of u tube to help.
Alguém do Brasil ?
Fala mano
Só acho que aquele isolamento ali perto do teto , pode marcar por causa da poeira da tinta
Молодец. Право
👍👌👍
Flying Dutchman :)
#carpaint.....#techwithravi
wished we could hear you!
hi
Try to commentate after the video we cant hear what you say
Mansur Mardanyar
PSI on blue and PSI on trasparent please? needle size? Thanks
2.0bar on blue and 2.0 bar on clear. 1.2nozlle and t110 cap
@@DutchCarPainter thank you my friend!
👌👏👏👏👏👍👍👍👍👍👍👍
12:40
Any vacancy painter post
Hi, I want to work with you artist
did you used fade out thinner?
This is Standoblue Waterborne. He sprayed Colorblend in the blend area prior to spraying his coat and a half of color. It's basically clear waterborne basecoat. Similar to Standox solvent fade out thinner. the difference is you have to blend into it while its wet. this eliminates dry overspray.
everything is fine.
just a little repair,
the panel should be all varnished, avoid touch-ups.
I hate seeing guys clear blend that top sail panel! Prep that 4 minutes worth of work and spend 5 dollars more clear to make a legit job! Also no door color blend? Just butt matching paint? This is almost a good job. Almost.
prob the clear is in the cup. you throw it away haha
Should have had hes gloves on the oils 🛢 off hez hand all over the paint work 🙄
Colorista bom
Hee. Hoeveel bar spuit je de blanke lak. En hoeveel ronden je naald naar buiten?
Op 2 bar en de naald altijd helemaal open.
Il y a un défaut sur l'aile
I need to due job with you
Where you from?
MEGA
Dlaczego nie lakierujesz od skraju do skraju elementu?
عايزين نعرف المسدسات
Mag ik als vrijwilliger bij jou werken en leren?
Waar woon je?
Rotterdam
Dutch Car Painter waar zijn jullie gevestigd?
👍
at 10:53 all he's doing is blowing dust on the paint never do that let it dry on it's own and he did not blend the door not good this guy is in a hurry i dislike this
This was probably a customer pay instead of an insurance job. Customer pay job's are usually given the choice to blend but they would have to pay more so they usually decline with the understanding that there could be a slight variation in color. I'm guessing that's why he didn't blend the door.
If you have to paint 3-4 cars each day, you cant let the paint flash of by itself.
Other than that, he blew upwards .
Blowing waterborne saves so much time!
so where was the tips, no help just watching you spray paint?
if you were a pro like me you dont need commetary...you can see in the actions...not words
omg why u paint edges after main surface ... what a crime :D
What do you mean?
Не в цвет,дверь темнее
ahahahahaahahahahahahah king ahahahahahahahaahahahahah
16superhyperedwin😀😀😀😀
De tanzifdi da bokadar ozatma
Kordonlar tutmamis boyamaaaaaaa
You very bearded
Nonono
👍🏻🇧🇷
Яша углон
No megusto tu corte del piyo por queno setapan ala terminasion como el para choque o el pilar de techo a el color que do malo
Puedes explicar un poco mejor; que quieres decir porfa y gracias?
كفار
Ton 1050 sert à rien c un opaque
Qu'est-ce que tu veux dire ?
Good
What type / brand of bledner do you use?