@@kruleworldI doubt that, to be honest. I don't see Mike Pondsmith, the creator of the Cyberpunk franchise, as one who would shut down a fan-made creation, as long as "fair use" applies
My only dissapointment is being just this dude there's a lack of refined skills and more importantly a lack of funds ie not using a rear engine crashed super car
This is such an amazing build. I grew up around cars and always wanted to customize one like this. This is one of those builds that's so good you almost don't want it to end.
I love how much detail is being achieved with such scuffed fabrication methods. Absolutely bananas what some ingenuity can accomplish when you can don't have too many engineering constraints or concerns and just need it to look right.
Man, this is just incredible. His ability to craft all of these parts with such a precise look, using low-tech methods (hand-forming metal hangers, using syrofoam cores, etc.) is inspiring. We all should learn these methods before the apocalypse arrives. 😅
I find this channel and build so refreshing, no ever-edited crap and actually shows what he is doing. A lot or creators would make a 30 minute video with maybe 10 minutes of actual content worth watching.
I stumbled upon this video 2 days ago. I was so impressed by the project that I went back and watch all the parts up to that one. It's really nice to see how much progress was made since he first assembled the foam body on a wooden frame
It's looking really nice...makes me wish car manufacturers would make cars that look like this instead of the usual round blobs we have today (unless we look into supercars)
Safety regulation. Crumple zones, pedestrian safety, reinforcement of ABC pillars, etc. Pretty much has dictated the design of cars for the last 20 years at least. Its hard to make cars look good or unique without designing something automotive safety regs would designate as a death box.
@@shadbud9198 indeed it does. The second point is cost. Round blob crossovers(I'm looking directly at you Chevy Trax) have cheap to manufacture platforms and body panels. The more angles and styling the higher production costs are. The quadra type 66 is pretty much a fast back mustang with a very aggressive wide body aero package similar to a gt3 car. Not very cheap. In fact. There is a production gt3 mustang for the 2024 model year. Also. The roundness has a better drag coefficient for fuel efficiency while also maintaining the required structural rigidity for safety regs at the lowest cost within reason. Remember when cars looked terrible from like 2006 to 2010? They were trying to work around all the major changes to safety standards. It took a while to refine the metallurgy and fabrication needed to make cars look okay again. Toyota is a good example of that process. 2004 mustangs looked pretty good. 2005 were mediocre then ok again by 2011. Sorry. I'm a car nerd.
@@WavveBoiinteresting explanation. I learned something. Thanks. Though I wish I could own something like a Quadra at an affordable price. Maybe in some alternate universe 😢
Would be so awesome to see CDPR reaching out to you at some point and perhaps see your creation at a convention one day. Would be pretty amazing if CDPR ever announced a sequel to Cyberpunk 2077 and have your Quadra V-Tech on display at their booth. 😃
@@YourPalQWERTY True, but with a functional model it would be much easier to move it around. Instead of having 4 people trying to put together all the pieces of a mockup over the course of a couple hours; you could simply drive this one to the expo hall and be done with it. 🙂 A shell might be cheaper to ship though because of the lower weight but either way you'd likely need a container to transport all the items.
@@Styphoryte Most likely yeah. All the assets of their booth would also need to arrive and be assembled so delivering them via trailer would be the most effective means. Having a car that can actually be driven would save a lot of time compared to a mockup that needs to be assembled first. But that's just my opinion. I'm simply amazed how this guy with some basic materials is able to create a complete working replica of a Cyberpunk 2077 car in his garage. 🙂
once again, so glad to see this series continuing man, this stuff is so dope, I really love this build. This is a dream come true seeing this come to life
im convinced this dude has never worked a day in his life. He has been enjoying and having fun with his talents and been compensated for it. Thanks to youtube i get to enjoy this mans journey and appreciate the art that you create. As a gear head and a gamer, THANK YOU
Initially I didn't realise what the intention of this project was, but then when the penny eventually dropped, I recognised how amazing this was. Well done.
Been following since the beginning and my god you are an inspiration. Every time a new episode comes out it actually makes me smile; i truly look forward to seeing these updates
The amount of work you put in to one cosmetic piece is astounding. Much respect. I probably would've just shaped it from polymer and coated it in resin but you went above and beyond. I'm in awe of your shop and how many different tools you have available. You can do just about anything.
By far one of the most unique builds I’ve seen and the Quadra is one of my favorite car designs in fiction. You’ve done a fantastic job with this I hope it’s going well behind the camera.
I’ve seen this project in my rec feed a few times and passed it up, now imma go and watch the parts I missed. The passion on display here is amazing, I’m excited to see it to the end!
Jeez, I follow your videos of quadra making and its crazy how much of time and hard work it takes to make stuff like that. I only wish I had that level of perseverance.
Im loving all the passion and true skill that you are putting into this beautiful build. Once you finish it please let Frank Stephenson review it on his channel. He is a car designer and he loved the car in his video about the vehicles in 2077❤
the amount of technica and technologic skill it takes to re-immagine let alone re-create in meta is cool. lol. Looked east due to the smoth transitions from 3D Mode rendering to Welding etc..is super chill. You have to have so much Disciplined time managment and cleanliness is at least worth a standing ovation. sweet..
I've I was a millionaire, I would have to hire you full time for the sole purpose of just making me Cyberpunk vehicles. This is so freakin cool. Keep it up man!
I love that your even attempting this build, Cyberpunk has come to be one of my favorite video games and universes, I hope CD Project reaches out to you to do a collab or something because the thought of this is so cool!
@@stephanel7 I would not drive that on a Russian road especially when its made out of 3d printed materials and wood, literally a single pothole will ruin its looks, I'm more so thinking that is just a prop car unless he finds a decent road especially in the middle of where he lives
@@ionicsourkrout You've misunderstood. He was reffering to the fact that the bump stops did not need to be metal as the car can't stand on its back wheels, or in other words - do a wheelie (like a motorcycle would), as it does not have the power to do so. While in the game the car does not do that, that's presumably why those pieces are there. In the real world realistically only drag cars pull wheelies
My god man, this is amazing to see how much dedication and hard work you're putting into this project. The Quadra Turbo-R is one of the coolest cars in the game. It's so cool that you're bringing it into real life.
That is amazing! Especially since I'm enjoying the hell out of Cyberpunk 2077 on PC right now and the Quadra is my favorite vehicle in that game. It reminds me of the lasersterling Lamborghini project.
i love this project too been following from begining it gives me inspiration to get on with my own project and i love your engineering and skills with fibreglass and the electrnics keep it up buddy cant wait too see this completed it will truly be a work of art . Thanks for sharing
this is all excellent work! I'm not sure how I feel about the fake air filters, as they were clearly skillfully done, but I feel that attaching genuine, cheap air filters to pipes leading to nothing would look much more genuine to the game's design then a fiberglass piece. Either way though, it looks great!
I'm no car person but i found this extremely interesting I got to learn a few things as well. like you did a spot weld almost right on the fiber glass i wasn't aware you could do that without doing damage to the fiberglass so that is something i'm actually glad i learned.
R.Talsorian Games and CDPR should immortalize you in the setting after so much hard work, the lengths you're going to replicate the V-Tech is insane to say the least
this looks so awesome man, i wish it was a rear or mid engine car you did this with and those intake was functional, but great work none the less. keep it up and cant wait to see the next video
Your work is so impressive you also picked a perfect car to mimic the sound of the car in the game as in the RX8. I REALLY HOPE SOMEONE HAS SENT A LINK OF YOUR WORK TO CD PROJECT RED AS YOUR WORK IS VERY IMPRESSIVE YOUR THE ONLY PERSON ON RUclips WHO DECIDED (HEY IM GONNA BUILD THAT CAR). Which is so awesome. As for using a RX8 The rotary engine sounds awesome with the exhaust system you built. I truly can’t wait when you finish this car because not only will it look absolutely amazing but truly a work of art. You are a true craftsman. Keep up the awesome work iv been following you since your video first popped up. Anyone who is a fan of CYBERPUNK 2077 should be sharing this with everyone.
Sometimes I question your methods, but I can't argue with the result! An intensely interesting project and I hope when you're completed you have it refined so it looks good in paint, that I think will be tedious and somewhat difficult, but if you pull it off (manage to achieve it, sometimes English translates to strange meaning) this should be pretty incredible, and you've inspired me! Well done!
This project is truly incredible and I hope someone from CD project sees this. Everyone should see this. It's a feat of engineering.
They've commented on earlier parts of this build
@kruleworld Don't think they would he's not planning to make more sell them or saying it's his design
@@kruleworldI doubt that, to be honest. I don't see Mike Pondsmith, the creator of the Cyberpunk franchise, as one who would shut down a fan-made creation, as long as "fair use" applies
@@kruleworld It depends.. CDPR and Mike Pondsmith? They will love it!
@@kruleworld с херали закрыли ?😅
This is still the coolest thing to come from the Cyberpunk fandom.
Without question
someone needs to make the tyger claw bike out of an ARCH method 143
@@shaboingboing1 call Keanu Reeves and have his company build one then👍
My only dissapointment is being just this dude there's a lack of refined skills and more importantly a lack of funds ie not using a rear engine crashed super car
Yeah, tbh this would best be built out of a C8, but aint nobody else steppin' up to the plate! Can't wait to see this thing finished!
This is such an amazing build. I grew up around cars and always wanted to customize one like this. This is one of those builds that's so good you almost don't want it to end.
I love how much detail is being achieved with such scuffed fabrication methods. Absolutely bananas what some ingenuity can accomplish when you can don't have too many engineering constraints or concerns and just need it to look right.
Search Bowell cars. Essentially what this guy is doing. Fibreglass diy cars. (Granted I would buy this over a piece of my countries history)
@@jamesbando_original The Nagari 300's tail lights make me yearn for a Honda Integra. :(
Man, this is just incredible. His ability to craft all of these parts with such a precise look, using low-tech methods (hand-forming metal hangers, using syrofoam cores, etc.) is inspiring. We all should learn these methods before the apocalypse arrives. 😅
You'd be amazed at what super high tech devices and vehicles use foam cores and hand formed composites in industry.
@@patton333 :o
cant wait to see the final product. awesome work
Car will be ready for when Cyberpunk Orion comes out
I find this channel and build so refreshing, no ever-edited crap and actually shows what he is doing. A lot or creators would make a 30 minute video with maybe 10 minutes of actual content worth watching.
Keep it up, man. This is my favorite build on YT, or anywhere. No one else is doing this
I stumbled upon this video 2 days ago. I was so impressed by the project that I went back and watch all the parts up to that one. It's really nice to see how much progress was made since he first assembled the foam body on a wooden frame
It's looking really nice...makes me wish car manufacturers would make cars that look like this instead of the usual round blobs we have today (unless we look into supercars)
Safety regulation. Crumple zones, pedestrian safety, reinforcement of ABC pillars, etc. Pretty much has dictated the design of cars for the last 20 years at least. Its hard to make cars look good or unique without designing something automotive safety regs would designate as a death box.
This ugly as hell but us white people would love this no kidding
@@WavveBoi Quadra type 66 seems like it would pass regulations
@@shadbud9198 indeed it does. The second point is cost. Round blob crossovers(I'm looking directly at you Chevy Trax) have cheap to manufacture platforms and body panels. The more angles and styling the higher production costs are. The quadra type 66 is pretty much a fast back mustang with a very aggressive wide body aero package similar to a gt3 car. Not very cheap. In fact. There is a production gt3 mustang for the 2024 model year.
Also. The roundness has a better drag coefficient for fuel efficiency while also maintaining the required structural rigidity for safety regs at the lowest cost within reason.
Remember when cars looked terrible from like 2006 to 2010? They were trying to work around all the major changes to safety standards. It took a while to refine the metallurgy and fabrication needed to make cars look okay again. Toyota is a good example of that process. 2004 mustangs looked pretty good. 2005 were mediocre then ok again by 2011.
Sorry. I'm a car nerd.
@@WavveBoiinteresting explanation. I learned something. Thanks. Though I wish I could own something like a Quadra at an affordable price. Maybe in some alternate universe 😢
Would be so awesome to see CDPR reaching out to you at some point and perhaps see your creation at a convention one day. Would be pretty amazing if CDPR ever announced a sequel to Cyberpunk 2077 and have your Quadra V-Tech on display at their booth. 😃
Considering how no one wants to interact with Russians nowadays it's unlikely that CDPR will reach out
Sadly this is a functional model, it would be cheaper for them to just make a shell and fixed metal frame and just ship that around.
@@YourPalQWERTY True, but with a functional model it would be much easier to move it around. Instead of having 4 people trying to put together all the pieces of a mockup over the course of a couple hours; you could simply drive this one to the expo hall and be done with it. 🙂
A shell might be cheaper to ship though because of the lower weight but either way you'd likely need a container to transport all the items.
@@DanakarEndeel I would imagine most expo hall cars are brought in by trailer anyhoo. :P
@@Styphoryte Most likely yeah. All the assets of their booth would also need to arrive and be assembled so delivering them via trailer would be the most effective means. Having a car that can actually be driven would save a lot of time compared to a mockup that needs to be assembled first. But that's just my opinion. I'm simply amazed how this guy with some basic materials is able to create a complete working replica of a Cyberpunk 2077 car in his garage. 🙂
Looks nova, choom. Can't wait for the final result. Been scrolling these since part 1. Keep up the good work! :D
once again, so glad to see this series continuing man, this stuff is so dope, I really love this build. This is a dream come true seeing this come to life
this is the best project i ever seen my entire life you made it so far since 3 years congrats ! it's almost done
probably the most nova car build i’ve ever seen. your work is truly impressive choom
im convinced this dude has never worked a day in his life. He has been enjoying and having fun with his talents and been compensated for it. Thanks to youtube i get to enjoy this mans journey and appreciate the art that you create. As a gear head and a gamer, THANK YOU
Initially I didn't realise what the intention of this project was, but then when the penny eventually dropped, I recognised how amazing this was. Well done.
Been following since the beginning and my god you are an inspiration. Every time a new episode comes out it actually makes me smile; i truly look forward to seeing these updates
got to respect someone who starts a project and sticks to it, and damn is this a big job
The amount of work you put in to one cosmetic piece is astounding. Much respect. I probably would've just shaped it from polymer and coated it in resin but you went above and beyond. I'm in awe of your shop and how many different tools you have available. You can do just about anything.
By far one of the most unique builds I’ve seen and the Quadra is one of my favorite car designs in fiction. You’ve done a fantastic job with this I hope it’s going well behind the camera.
Legit i caught up on the last four episodes today because id forgotten about the series and then bam. New episode.
*Chefs kiss*
I dont know how I ended up here, but I couldn't stop watching 😂.
Piece by piece you're getting closer to getting this thing screen-accurate than I ever thought you would. Amazing work, keep at it!
I Don't even need to watch the whole video to know that I already like it ! ☺
I’ve seen this project in my rec feed a few times and passed it up, now imma go and watch the parts I missed. The passion on display here is amazing, I’m excited to see it to the end!
I am so glad someone is making one of these. Absolutely love the look of them!
It's the attention to detail that really sells how much you enjoy the build
This is the greatest thing I have seen on the internet all year. Been following this build for a while. Absolutely amazing work!
You are absolutely legendary.
I hope they add you in the lore as a Quadra designer or something at the very least.
I can’t believe it took me this long to find the progress on this. This is incredible!
I come back every now and then to check on this build. This rear end is incredible!!
Again, absolutely brilliant upload. This just keeps getting better and better
These videos are absolutely amazing. This young man truly is an artist and mechanical genius.
Jeez, I follow your videos of quadra making and its crazy how much of time and hard work it takes to make stuff like that. I only wish I had that level of perseverance.
Sometimes I forget how capable we are as humans, you are incredibly talented.
this is actually insane!! honestly in just in awe of your ability, I'm definitely gonna keep an eye on this build, keep it up man!
This is basically a masterclass on kitbashing at 1:1 scale. Brilliant
I am excited and satisfied to see the ingenuity you show in solving problems, a treat
It’s crazy how the two tier spoiler transforms the car! Beautiful work I’m excited to see the next video on this build!
Finally, updated with all process. How fast time passes by watching these videos
Dude is a genius! This might be the coolest solo creation on the internet.
Been here Since part one. By far my favorite build I’ve been keeping up with and it’s so cool to see how far it’s come
It's coming along nicely, looking back to when you started, there is so much completed now. congrats.
I cant waiiiiiiit i love your project man, makes me so happy that at least one of us will be able to drive this beauty
Берешь в охват не только русскоязычную аудиторию, но и иностранную. Это круто, без преувеличений круто))
Надо нашем Ютубе сейчас денег не заработаешь особо, поэтому много кто сейчас переводит видосы
Im loving all the passion and true skill that you are putting into this beautiful build. Once you finish it please let Frank Stephenson review it on his channel. He is a car designer and he loved the car in his video about the vehicles in 2077❤
the amount of technica and technologic skill it takes to re-immagine let alone re-create in meta is cool. lol. Looked east due to the smoth transitions from 3D Mode rendering to Welding etc..is super chill. You have to have so much Disciplined time managment and cleanliness is at least worth a standing ovation. sweet..
This project is so awesome your doing a great job
My dude made a whole ass car himself with sliding doors and everything, feel the pride this us great.
I've I was a millionaire, I would have to hire you full time for the sole purpose of just making me Cyberpunk vehicles. This is so freakin cool. Keep it up man!
can’t wait til this is finished!! will be truly one of a kind
as a car guy, a former mechanic, a nerd... this is fantastic!
I love that your even attempting this build, Cyberpunk has come to be one of my favorite video games and universes, I hope CD Project reaches out to you to do a collab or something because the thought of this is so cool!
Amazing work. I'm sure the final result will be stunning! Do you plan on making it road operable ? Or just a stunt/prop car?
It's russia, im sure he'll drive it lol
@@stephanel7 I would not drive that on a Russian road especially when its made out of 3d printed materials and wood, literally a single pothole will ruin its looks, I'm more so thinking that is just a prop car unless he finds a decent road especially in the middle of where he lives
He said in the video it can't rest on back wheels lol
@@ionicsourkrout You've misunderstood. He was reffering to the fact that the bump stops did not need to be metal as the car can't stand on its back wheels, or in other words - do a wheelie (like a motorcycle would), as it does not have the power to do so. While in the game the car does not do that, that's presumably why those pieces are there. In the real world realistically only drag cars pull wheelies
@@ionicsourkrout he meant it can’t do wheelies lmao
My god man, this is amazing to see how much dedication and hard work you're putting into this project. The Quadra Turbo-R is one of the coolest cars in the game. It's so cool that you're bringing it into real life.
I have been closely following this project, can't wait for this to be complete
i was skeptical at first but damn its really coming together, BRAVO!!
this is just insane! love watching this build! this man is a master of his craft!
Truly amazing work, it's going to be mind-blowing once you're done.
Can’t wait to see the whole thing finished. This is an awesome project.
That is amazing! Especially since I'm enjoying the hell out of Cyberpunk 2077 on PC right now and the Quadra is my favorite vehicle in that game. It reminds me of the lasersterling Lamborghini project.
In all seriousness, cyberpunk has some of the coolest car designs, and I wish they would make cars like that for real
This is amazing.
I hope you're being safe with all of the chemicals you work with. Good luck with your project.
I am a fan of the Cyberpunk 2077 game . The work you do is so amazing. I will follow the project until the end. Greetings from Poland.
i love this project too been following from begining it gives me inspiration to get on with my own project and i love your engineering and skills with fibreglass and the electrnics keep it up buddy cant wait too see this completed it will truly be a work of art . Thanks for sharing
Damn this dude is going all in , coolest project ever
this is all excellent work! I'm not sure how I feel about the fake air filters, as they were clearly skillfully done, but I feel that attaching genuine, cheap air filters to pipes leading to nothing would look much more genuine to the game's design then a fiberglass piece. Either way though, it looks great!
when i saw it i tought he was going to at least put real air filters but its ok i still love it
So many disciplines and trades being used. Craftsmanship. Wow.
I'm no car person but i found this extremely interesting I got to learn a few things as well. like you did a spot weld almost right on the fiber glass i wasn't aware you could do that without doing damage to the fiberglass so that is something i'm actually glad i learned.
i love seeing this project slowly move forward, its so awesome :D
That is pure RUclips entertainment. Good work, we are following it!
This is so freaking awesome! I'm going back to watch the rest of the series now
being here from the first episodes it going to be amazing to see it finished and driving
R.Talsorian Games and CDPR should immortalize you in the setting after so much hard work, the lengths you're going to replicate the V-Tech is insane to say the least
Love your videos man, keep up the good work
this looks so awesome man, i wish it was a rear or mid engine car you did this with and those intake was functional, but great work none the less. keep it up and cant wait to see the next video
The type of commitment I need to have😭 You are amazing my friend
Your work is so impressive you also picked a perfect car to mimic the sound of the car in the game as in the RX8. I REALLY HOPE SOMEONE HAS SENT A LINK OF YOUR WORK TO CD PROJECT RED AS YOUR WORK IS VERY IMPRESSIVE YOUR THE ONLY PERSON ON RUclips WHO DECIDED (HEY IM GONNA BUILD THAT CAR). Which is so awesome. As for using a RX8 The rotary engine sounds awesome with the exhaust system you built. I truly can’t wait when you finish this car because not only will it look absolutely amazing but truly a work of art. You are a true craftsman. Keep up the awesome work iv been following you since your video first popped up. Anyone who is a fan of CYBERPUNK 2077 should be sharing this with everyone.
This is really becoming great !! now the back look is almost perfect
Great job, amazing work, can't wait to see this quadra finished
This has to be one of the coolest builds on youtube.
I'm glad you made the tow hitch out of metal. never know when you'll need it
This is my favorite thing on RUclips rn, keep up the good work👍
Just gonna let you know this, If one day I build a car this guy was my inspiration.
This guy is a genius. Awesome build!! 👍🏻
I would love to see this thing driving when 100% done
Awesome project. I look forward to all your updates!
This is unreal. Some fantastic engineering.
The detail is becoming really unbelievable. Well done!
Sometimes I question your methods, but I can't argue with the result! An intensely interesting project and I hope when you're completed you have it refined so it looks good in paint, that I think will be tedious and somewhat difficult, but if you pull it off (manage to achieve it, sometimes English translates to strange meaning) this should be pretty incredible, and you've inspired me! Well done!
100% true
I often question this guy's methods (such as using plywood for the tail lights) but the results are undeniable
Unreal. We are witnessing the process of making a masterpiece💪🏻
This guy always leaves us wanting more
Got this video recommended and immediately subscribed! Hella impressive job!
Your attention to detail is amazing!
I hope one day we get to see this beast on a track or strip, fell in love with this car since the first trailer we got to see it
I tip my hat to you. Your really doing a fantastic job on this project.
one of the best action figures any body could imagine.
Dude, you are amazing! I know it is a process but I can’t wait to see it done.
Holy shit. I thought this was a video showing it off in the game. Keep this going man this is awesome