Comprehensive How-to TDI Swap Guide! Part 1: Intro and Stripdown Guide (Mk2 Golf Build)
HTML-код
- Опубликовано: 21 окт 2024
- In this video series we're showing you how to do a full TDI conversion on your Mk2 Golf.
We'll be tackling everything from CE1 to CE2 conversion, bodywork, fitting, you name it. With full diagrams and explanations, as well as handy tips and tricks.
Alongside the TDI swap we'll be doing a full restoration on the bodywork and interior of our beloved Mk2 Golf, Veronica.
Need some parts for your VW build? Check out our friends at Heritage at the link below!
bit.ly/427_Moto...
And check out our webstore for cool merch!
427motorsports.co.uk/store
Music Credits:
When not our own originals, music is sourced from Bensound.
Can't wait to see part 2!! Thanks for all of your hard work.
Very good video , Thank You
Thank you for posting this. Your project is a great motivator. Mine is an '86 with an AHU swap. The progress stalled about 2 years ago.
Awesome, well with yours being a CE1 like ours hopefully this will help a wee bit if you went the swapping over route. And even better if it can help motivate you to get back to it :)
Thank God for these videos, subscribed.
More to come, we haven’t given up on it - it just turned out we had a lot more bodywork to do than planned!!
You got a new subscriber. Great videos. Getting a tdi swapped in my 1990 mk2 this summer, hope it goes well. All the best for you. 👍
Thanks very much Edgars, we really appreciate it!!
The famous mk3 😁 great vid
Cheers! :)
Great to watch, deadly video!
Cheers Michael! So much more work ahead 😅
Thanks for this. I may need to remove my slam panel for retrofit aircon condensor. Looks less intrusive than I thought.
Yeah we remove them on a regular basis for doing work, takes really about 5 minutes when you know where all the bolts are and makes for much less effort to work!
I work on a driveway made of the same gravelly stuff , get a cheap yoga matt and use it when you have to kneel or lay down on the stones ..... your body will thank you lol
Funny we do have some... But in the heat of the moment sometimes you don't think! :D
Great video, going to try to put a 1.9TDI AHU in my mk2 jetta this winter
Awesome! We'll need to get around to doing a follow up to this, we're sadly still waiting on bodywork to be done, but hopefully shouldn't be too much longer. Thanks for the comment!
hello ive got a mk2 jetta 1987 that is ce1 loom and i putting a pd130 engine in. I've been recommended to swap to a ce2 loom and fuse board, is it hard to swap to ce2 loom
We will be getting into that in a future episode, but it depends on how much you want to strip! We were going to go PD and we were going to do a CE2 swap to be honest, but it's not necessary. Likely less effort and faff to go CE2 than to stay CE1.
ليل اسف لم افهم
نفس الفتى ، نفس الشيء..