My steering rack was very bad hahaha it wouldn't turn to the left it the steering wheel would just continue turning and the wheels stayed in their position. Your restoration on the steering rack turned out amazing.
Hi mate, really hoping you can help as I'm doing this exact process at the moment. That bearing that you put back in at @8:55....how did you get it out in the first place? Mine is fully pressed in, and I cant take the rack out of the pipe to clean and grease without taking this bearing out. Thanks!
Hey. Your bump steer might be messed up if you don't set the tie rod distance to 69mm. It didn't look like you've measured it and threaded it on quite deep(like I did on mine).
Salutare, merita dpvd al consturilor si timpului sa reconditionez o caseta de directie, avand in vedere ca am gasit una noua in jurul sumei de 300 de lei?
Sigur ca nu merita :) dar daca nu facem nu invățăm. Nu merită tot proiectul daca ne uităm rațional la costuri/timp. Este o pasiune care necesită experiență ca să avansez înainte :D baftă !
I've a mk2 Scirocco it only had adjustment on one end of the rack. Is is just a case of fitting a second adjustable tie rod and ball joint to make both sides adjustable? Are the rods the same lengths and thread etc both sides?
Foarte greu avanseaza tinichigiul, are vreo 5 proiecte in paralel ... Toate masini retro... O sa incerc sa-l mai conving sa avanseze... Sper ca in vara ajunge inapoi la mine sa ma apuc de pregatit pentru vopsit.
@@upcyclethepastutp9901 Proasta veste... eu am crezut ca o sa fie gata deja vopsita si de asta ajunge asa de greu. Speram ca o sa ajunga cat mai curand, ne e dor de ea!! Mult succes si abia astept sa incepi asamblarea pieselor! Iti urez mult spor! Respect ❤️
@@andrei_cmn pfuai si eu asa am crezut, ca deja era in stagiul de reasamblare... Lucram cu ce avem, n-am ce sa fac. Incet dar sigur o sa fie gata. Ideea este ca lucrez si la hambar... Care necesita un efort mare. Multumesc tare mult pentru interes si suport !
@@upcyclethepastutp9901 Mult succes cu tot ce ti-ai propus sa realizezi! Te urmaresc cu drag, si poate ne vedem anul acesta la Zetea, in august. Nu am mai fost pana acum, dar atmosfera pare geniala! Facem o poza cat de curand 🤜🏼🤛🏼
I Really enjoy these restoration videos💯👌 very good work and I learn alot of these videos. Thank you for that💯
Really satisfying to watch! Well done mate!
Nice job! I really enjoy your videos. Keep up great work. Thanks for sharing knowledge.
cant wait to see how the golf turns out, gonna be amazing
Great video thanks! Your have a wide variety of skills 👏🏻👏🏻🙌🏼
I love all your videos good job bro
Wonderful work
Great video. Inspires me to do mine. Please list the parts and the source for all the bushings. That would be very helpful.
MK1 DOCTOR
Pozz SRB
Nice work man
My steering rack was very bad hahaha it wouldn't turn to the left it the steering wheel would just continue turning and the wheels stayed in their position. Your restoration on the steering rack turned out amazing.
Im going through the same thing now,it doesnt turn to the left especially if the car is not moving. Did you restore yours or replace it completely?
Yes, I had to replace it completely. It was quite easy to replace.@@tebzamoyaga6823
Hi mate, really hoping you can help as I'm doing this exact process at the moment.
That bearing that you put back in at @8:55....how did you get it out in the first place? Mine is fully pressed in, and I cant take the rack out of the pipe to clean and grease without taking this bearing out. Thanks!
Good job 👍🏻
although a brand new Meyle rack is only £70 and the track rod ends £20 here in the UK 🇬🇧 so i just bought those and fitted them to mine 🤣
Ty m8 ! I know this was not that smart of a move, but It's about the journey, and gathering experience !
Hey. Your bump steer might be messed up if you don't set the tie rod distance to 69mm. It didn't look like you've measured it and threaded it on quite deep(like I did on mine).
Salutare, merita dpvd al consturilor si timpului sa reconditionez o caseta de directie, avand in vedere ca am gasit una noua in jurul sumei de 300 de lei?
Sigur ca nu merita :) dar daca nu facem nu invățăm. Nu merită tot proiectul daca ne uităm rațional la costuri/timp. Este o pasiune care necesită experiență ca să avansez înainte :D baftă !
Good job, just keep it up…
I've a mk2 Scirocco it only had adjustment on one end of the rack.
Is is just a case of fitting a second adjustable tie rod and ball joint to make both sides adjustable?
Are the rods the same lengths and thread etc both sides?
If I want a power steering which one's can I fit on VW golf mk1 velocity
Why heat those parts up? Love the content 😊
Do you have footage of how you removed the steering gear?
Is the golf ready?
just buy a screw drill like m10 or smthng and cut a bolt to 3 mill, screw in and use the oem rack
Salutare! Care este starea caroseriei?
Foarte greu avanseaza tinichigiul, are vreo 5 proiecte in paralel ... Toate masini retro... O sa incerc sa-l mai conving sa avanseze... Sper ca in vara ajunge inapoi la mine sa ma apuc de pregatit pentru vopsit.
@@upcyclethepastutp9901 Proasta veste... eu am crezut ca o sa fie gata deja vopsita si de asta ajunge asa de greu. Speram ca o sa ajunga cat mai curand, ne e dor de ea!! Mult succes si abia astept sa incepi asamblarea pieselor! Iti urez mult spor! Respect ❤️
@@andrei_cmn pfuai si eu asa am crezut, ca deja era in stagiul de reasamblare... Lucram cu ce avem, n-am ce sa fac. Incet dar sigur o sa fie gata. Ideea este ca lucrez si la hambar... Care necesita un efort mare.
Multumesc tare mult pentru interes si suport !
@@upcyclethepastutp9901 Mult succes cu tot ce ti-ai propus sa realizezi! Te urmaresc cu drag, si poate ne vedem anul acesta la Zetea, in august. Nu am mai fost pana acum, dar atmosfera pare geniala! Facem o poza cat de curand 🤜🏼🤛🏼
@@andrei_cmn este foarte fain la Zetea. Plin de pasionati de vw, masini frumoase si oameni faini ! Eu o sa fiu prezent cu GTI-ul rosu :D
Geez, I needed to see how you put the boots on. You speed up everything so fast. Ugh!