How to make a Dockstart board and how to use it
HTML-код
- Опубликовано: 21 авг 2024
- Hi ,
in this new video you will learn how to make your own board to dockstart with a foil.
I also give you my tips that helped me when learning the pumping technique.
in this video i
use 1000 Glide from www.allure-wat... with stab 37 surf from www.ap3dcustom...
I'm a Foil enthusiast (kitefoil, surfoil, wingfoil) and unfortunately I can't afford all the equipment so I do it myself.
I am a self taught builder and this video shows my process of building a foilboard that works for me
Great slomo dock start tips!
Superbe planche! Et wow il est genial ce dock!
Merci beaucoup 😀
good job man👍
awesome
Nice board and nice montage too! It is very helpful as I am about to build one myself, thank you.
I have a few question if you have some time to answer:
1. Why fill the holes for the foil mount with expoxy + microballoons instead of epoxy + silice as i understand this would be stronger?
2. What is the purpose of epoxy + silice layer before the expoxy + microballoons?
3. Are you using regular stainless steel pan head machine screw to mount the foil to the board?
Happy foiling!
Belle board Greg! Comme la dernière remarque. Bien vu le scoop apres la première strat aussi! je vais faire ma board de dock start en planche de pin pour tester...j'ai jamais fait de stratification. Une remarque: la platine est vraiment sur l'arrière de la planche, tu as un méthode pour estimer le positionnement (testé avec ton foil sur une autre board?) Merci ;)
Merci. Pour le positionnement, comme c'est le même Foil que j'utilise en surfoil je sais où se situe le 'sweet spot' par habitude
Great job! What is epoxy + silice? And what did you use for colour? Well done on dock start! Did you make the foil too? It looks to be high aspect wing.
Silice it's filler adding to epoxy like micro-balloon. I use pigment with epoxy .
No i just make my board, not my foil. And yes it's kinda HA wing
Awesome board you made . i’m also trying to build one but not sure witch kind of foil should i take for it if i’m a 70 kg beginner
I started with a 1700 front Wing that a friend lent me for 3 sessions ( i'm 68kg)
Would a slingshot ptm 926 work it's only 1350cm but pumps well for winging and slow stall speed maybe 7mph ?
Maybe, i don't know. Try and let me know the answer 😉
@GregBasmati I would need to make a board for it my wing board is 114l so to big
It's a lot to do if the foil won't work
I haven't seen anyone in the UK try it so no chance of any second hand kit 😕
@@elliottaylor8344 I took a brown vehicle plate, which is waterproof on the surfaces with a little resin, voilà
Salut, merci pour la video, tu pense que sur une planche de pump ca se fait de strat pont et carène d'un coup sous vide? J'ai tout préparé je suis en train de voir pour la strat
Is the xps prone to delamination and would wood be better?
Also, how do you stop the screws from pulling through and what kind of bolt are you using underneath? Normally in my axis foil the countersunk screws sit flush in the base plate and the foil track bolts in the box but you have the screws going deck down. Are you just using regular bolts underneath on the baseplate?
If your sanding with 80 the xps before no delamination (Imo) but i think there is no concensus xps vs other foam. some prefer xps, others hate it and claim the risk of delamination. if you sand your surface well before in my opinion no worries
photos.app.goo.gl/vr29pzC349fzxUKv7
@@GregBasmati thanks. The pic of the screws is very helpful. I hear what U are saying re xps. I'm not that experienced so thinking I'm a bit hesitant to use it. If I chose to use just a piece of ply wood or maybe some pine wood say about an inch thick, do you think using polyester resin is ok? Epoxy is very expensive where I live. Also, does it matter if there is no rocker? I would just be using it for dockstart
Bravo, superbe board Greg !
Je suis sur un projet similaire mais je bloque complètement sur le système de vis ; comment fais-tu en pratique ? Tu mets des écrous côté platine du foil ?
Et autre question,pour le vaccum est-ce un type de bâche spécifique ou n’importe quel plastique fait l’affaire ? J’ai peur de retrouver le plastique collé à ma résine 😅
Merci ;)
photos.app.goo.gl/vr29pzC349fzxUKv7
Je pense que pour le sous vide c'est un plastique spécifique. Ça ne colle pas à la résine, faut pas en tartiner trop dessus quand même car tu risques de déchirer ta bâche en enlevant la planche
Nice done!
I am wondering, wouldn't it be enough with just a waterproof plywood plate without carbon and fiberglass?
I do not think so, even it's waterproof plywood, fiberglass or carbon provides rigidity and strength.
@@GregBasmati :) still I am going to try. It will be a cheap, quick and dirty prototyping.
BTW how much did it cost for you?
yes I like this state of mind! I don't know about cost, this board is made from leftovers carbon, epoxy and pads
El famoso ! Yess 🎉🤙 c’était la glide 1300 à la fin?
Glide 1000 😉
Nice! How did u print on a full scale in the shape 3d?
Just the print button with the outline selected
there few step now for the free version select the black icon of the ouline ( he has it selected on his video) and press the 1:1 icon ( not present in the video) which not far the black outline on the right and then you will be able to go file and print. it's will print print at full scale (1:1) , greg has an option selected called rail master that is not available for lite version.