@EVILGT big up Leicester crew man like chrizzle stepping up steppin in. More special guests please including quick mug shot of Lee even though he werent in the video. Glad to see Y food & not golden arches no more #ronaldceo #clownfood
Holts headlight restoration kit for the rear lights, i bought a st with stupid black painted lights. Worked a treat brand new after. Well worth £13 and a a few hours work plus you can do the fronts while you're at it.
@EVIL GT rear lights are easy to remove too, also worth replacing the sealing rubbers etc as these are prone to leaking. I was lazy and just took them out cleaned them up and murdered them with clear silicone sealant, also the little plastic parts where the lights screw into
If you have issues with the spacers welding to the brakes, could try a layer of copper grease in between. Also a layer between the spacer and the wheel so they won’t stick there either
This is your best content guys. I'm a huge petrol head, but I haven't got a clue what to do when it comes to doing actual jobs on any of my cars so I like learning from your videos as you go along. Keep up the great work lads
The effort in these videos are night and day difference over most youtubers at the moment. You guys deserve well the 100k plaque and more, the skills Bens gained over the past few months alone is amazing. Keep it up guys unreal work.
Good job boys. Sunroof was an option with the ST’s. If the pedal still feels long you might have some air trapped somewhere, pressure bleeders are a great bit of kit to help you out ✌🏽
Great video and content Benji.... I've been subscribed to your channel since day one and I can honestly say its just got better and better since you came down a peg or two regards the type and price range of cars most of us out here drive and can afford...Great to see Chris pop up as I watch his channel too !!
Another example of your fine workmanship Uncle Benji 😍👏🏻😍👏🏻⚽️😍 and nice to see u drafting in your minions to help out as well...Great vid as ever m8 and loving them big time!!!!....All the best to u and chief editor Lee, buddy 😂🙈😂🤞🏻🤞🏻
I have to say you always do a great job , you put so much effort in its a pleasure watching . So happy I subbed a year ago , just can't believe I didn't come across the channel earlier.
Absolutely epic video benny boy! Love your can do attitude, gives people confidence to have a go themselves, loved Chris popping by! Would be great if yous could film a couple of videos of Chris helping out, keep up the great content x
That decat to mid pipe will never be right if you keep it the same as you have a 3 inch to a 2.5 inch diameter so you've got the gasses directly hitting part of the flange on hence trying to escape as the flow is disturbed
Please i need help with my MK2 1.6 2011 model. The information cluster screen light remains on even when the vehicle is switched off and locked. How do i turn the information screen off when not in use.
Head to squarespace.com/evilgt to save 10% off your first purchase of a website or domain using code: EVILGT
@EVILGT big up Leicester crew man like chrizzle stepping up steppin in. More special guests please including quick mug shot of Lee even though he werent in the video. Glad to see Y food & not golden arches no more #ronaldceo #clownfood
I'm really enjoying the RS and ST series, the ST is a car that alot of people can afford and a great place to start car modifying.
There are some kind of rubber attachments to put on a drill to remove stickers etc. Works perfect for stuck on vynil like that.
Use heat from plummers burner. Does help a lot on tough nuts and bolts
Holts headlight restoration kit for the rear lights, i bought a st with stupid black painted lights. Worked a treat brand new after. Well worth £13 and a a few hours work plus you can do the fronts while you're at it.
Nice one 👍🏼
@EVIL GT rear lights are easy to remove too, also worth replacing the sealing rubbers etc as these are prone to leaking. I was lazy and just took them out cleaned them up and murdered them with clear silicone sealant, also the little plastic parts where the lights screw into
Loving the new content, nothing more satisfying then learning to fix or repair something yourself and saving some £££ to spend on new toys🤔
The cross over we never knew we needed lol ...good to see slix on the channel
Really enjoying this new direction guys - ‘give it a go’ attitude is great!
Bit of copper crease behind the spacers might help to stop them from sticking together
Smashing it Benji 😎 Matt Armstrong 2.0 in the making haha
Love your videos Ben , you’re doing a fantastic job and great to see Chris make an appearance too 🙌🙌🙌
Another great video with great banter….. has Lee gone camera shy 🤣🤣
If you have issues with the spacers welding to the brakes, could try a layer of copper grease in between. Also a layer between the spacer and the wheel so they won’t stick there either
Well done on all the hard work & effort put into this Focus project 💪💪💪
Ive been watching your channel for a while now and I think you are doing a fantastic job mate, really like the new format. Thank you and good luck
Great video Ben , these videos in the unit are mega , the Cupra , Rs, and St very entertaining love it keep em coming 👍👍👍
Considering you was the none youtube guy all that time ago ... Your smashing it Ben .... Get a Collab with autoalex. Would be mint
This is your best content guys. I'm a huge petrol head, but I haven't got a clue what to do when it comes to doing actual jobs on any of my cars so I like learning from your videos as you go along. Keep up the great work lads
great video my made just got a focus st so these videos are pretty interseting for me now
I had similar on stripes on mini. Vinyl kept snapping. Was told to use boiling water. It softens the glue and vinyl and it peels off
Doing great things Ben
Oh snap wasn't expecting that surprise guest!
Love the vids keep up the good work benji
I used a thing called a whizzy wheel gets vinyl off very fast . Amazing things I removed my factory fiesta st side stripe off with no issues 🙌
Keep saying this but the quality of this content is top class. Would love to see Lee get his hands dirty though were missing him
Great stuff,but you should put some copperslip on the hub before fitting the wheels , also you need a torque wrench for all those bolts.
Use some polishing compound on rear lights it will take that spray tint crap straight off
Loving the vids boys. But gotta say missing the Evil banter between you and Lee. And the breakfast gambling 😂
Getting better every video. Top work Ben.
Thanks
Repainted my 330i calipers in bmw caliper msport blue and bought new anti rattle clips as the old ones were red.
silver is a nice contrast to blue
The effort in these videos are night and day difference over most youtubers at the moment. You guys deserve well the 100k plaque and more, the skills Bens gained over the past few months alone is amazing. Keep it up guys unreal work.
Cheers mate 👍🏼
Loving this series mate
I can’t fault your enthusiasm to get stuck in. Great job!
It’s like a brand new!! Great work Ben.
Brilliant series lads
Ben doing a great job, really enjoying the content
Good job boys. Sunroof was an option with the ST’s.
If the pedal still feels long you might have some air trapped somewhere, pressure bleeders are a great bit of kit to help you out ✌🏽
Focus st is coming on great really enjoying the videos 👍
Benji you are smashing these videos the St is coming along so nicely keep up the great work nice to hear Leeroy again 👌🏻
Loving the ford content ❤
Unbelievable Benji mate, keep smashing these videos out!👍🏻
Uncle Benji strikes again. Top work.
Nice to see Chris in the video . And tour Doing a great job Benji
Bit of wet sanding and polishing will get that tint spray shite off the rear lights Ben 👌
The gun gum is ace, not used it in years but never let me down in the past👍🏻
the vinyl roof looked a nightmare, the st is coming along nicely 👍 top work benji and others 😂👍
Boss work Ben👌👌, nice to see Chris helping you👌❤️🤘🤟👍
Awesome work Ben, your smashing it mate ! soooo glad your mate went for blue with the brakes 🙌🙌 & wicked to hear Lee 👍 The Boys are back in town 😁
Glad you liked them i polished them for you mate 🎉😊
Great vid, no messing about, keep her lit
Brilliant video Ben, great content and good real world useful tutorial
Great video and content Benji.... I've been subscribed to your channel since day one and I can honestly say its just got better and better since you came down a peg or two regards the type and price range of cars most of us out here drive and can afford...Great to see Chris pop up as I watch his channel too !!
Nice one Ben! Great work
loving these new videos and the consistent uploads... keep it up
Class video again Ben 👌
Wasn’t expecting to ever see Chris Slixx in your videos!
Doing great work still benji, I actually don’t mind the silver clips on the callipers matches with the wheels now. Keep at it matey 👍
Another example of your fine workmanship Uncle Benji 😍👏🏻😍👏🏻⚽️😍 and nice to see u drafting in your minions to help out as well...Great vid as ever m8 and loving them big time!!!!....All the best to u and chief editor Lee, buddy 😂🙈😂🤞🏻🤞🏻
I have to say you always do a great job , you put so much effort in its a pleasure watching . So happy I subbed a year ago , just can't believe I didn't come across the channel earlier.
Cheers mate 👍🏼
Optional extra was a sunroof 👌👍🏻
Another brilliant video guys
Fair play to the guys staying late to help remove that vinyl!
Absolutely epic video benny boy! Love your can do attitude, gives people confidence to have a go themselves, loved Chris popping by! Would be great if yous could film a couple of videos of Chris helping out, keep up the great content x
What this space mate 😉👍🏼
In an ideal world, no exhaust paste. Owning a ford, gun gum is essential 👌
Good job Ben!! Smashing it brother
Can we have more of your dad please ? He makes me laugh
Love this channel Ben . Keep up the good work must be certificated right up now 🤣👊🏻
That decat to mid pipe will never be right if you keep it the same as you have a 3 inch to a 2.5 inch diameter so you've got the gasses directly hitting part of the flange on hence trying to escape as the flow is disturbed
Im sure those clips on the front were same as the Volvo c30 t5 brakes or the big brakes volvo. Great content!
,whens part 4 ? ive got a frozen white pfl to , get them sideskirts off and check the sills and lower front wings just had to repair mine
Editing it as we speak 👍🏼
sweet road trip
Benji well done great job as always 👍👍👍
Great work Ben and good effort 👌
Really enjoy your videos now guys. Good work 😊
Cheers bud 👍🏼
Another video 👌 just what I like to see brilliant guys ❤️
Another certificate smashed! Well done Ben 🚗
i cant do it , i dont know what to do .....youtube man is the answer to everything!
I hope you are charging Jay for your labour Ben? Professionals charge a fortune these days, especially someone with as many certificates as you mate!
He’s getting videos out of it plus it’s his mate so doubt he’s gonna charge him much if anything
Full year of beers probably
@@izykhan123 it was a joke dude, chill
Oh my bad bro😂
I’m guessing it’ll be beer o’clock end of each day
Awsome uncle benji,hope lee is ok.🤜🤛
Ben , great videos
Use a Toffee wheel to take off the vinyl. Then re-wrap.
Tried one mate. Didn’t touch it 😅👍🏼
Great stuff 👍
Needs a vr6 lump in it
what colour are the wheels bud, they look amazing
Whatever the Ford silver is mate 👍🏼
There's one just like yours for sale here 2010 plate only done less than 2100 miles £50,000,
Nice one Ben
Great video
Please i need help with my MK2 1.6 2011 model. The information cluster screen light remains on even when the vehicle is switched off and locked. How do i turn the information screen off when not in use.
I Would do thé symphoser delete which can split .I would do a search and then delete it
How's your lumber sensor, haha!
Why didn’t you replace the back plates or paint them? Car looks abused. New to your channel. Loving the content
Yay always good to be early
Plastic Stanley blades work perfect 😂👌
Those freshly done wheels need some fresh wheel nuts instead of those rusty ones 👌🏾
My standard ST alloys centre caps are all blue, not white ?
These are silver mate. Based on the chassis number at parts plus anyway 🤷🏼♂️👍🏼
I know we all love to joke about Ben’s certificates but I am so impressed! Fixing multiple cars at once, basically by himself, that’s tough work! 👍🏻👍🏻
Thanks mate 👍🏼
£26.49 from eurocarparts for front caliper fitting kit 👌
dont put sunroofs in st n rs good vid lads
Can I ask where you got the centre caps from please mate 👍
Partsplus mate 👍🏼
@@EVILGT Awsome thanx mate great channel glad I found 👍
Shame you didn’t clean the rust off the back plate before putting discs on.
Loving the new content stuff . Next in list engine swap on a car 😅