Fusion 360 problems (3 Tools You Must Know)
HTML-код
- Опубликовано: 14 июл 2024
- How to find errors in sketches, how to fully define problem sketches and steps for troubleshooting in Fusion 360.
🎥Watch Next
Brand New User Series With Exercises bit.ly/brandnewuser
Quick Tips Series bit.ly/FusionQuickTips
23 Tips Beginners Should Learn bit.ly/Fusion23Tips
⚡Subscribe To Get The Latest Videos
bit.ly/SubscribeTechEspressoNow
💪🏼Support Me On Patreon
/ techandespresso
Content Writeup
___________________________________________________________________
#Fusion360
#Fusion 360 Tutorial
___________________________________________________________________
DISCLAIMER
This video and description may contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps you support the channel at no extra cost to you and allows me to continue to make videos like this. 
Наука
What sketch errors and problems do you have in Fusion 360?
I have free trail version and it takes time to use the commands ( internet outages from Autocad cloud internet) .
Didn't know there was a command line. Thanks awesome video
thank you for continuing to put out content! youre my favorite fusion instructor!
Thanks! Really good video! Things I have had problems with… Can you accidentally delete a sketch item from one sketch while using it as a projected item in a second sketch? Also, if you close Fusion 360, when you reopen it the top level assembly is selected rather than the component you were last working on. More than once I have started Fusion 360 and added a sketch, only to find it is in the top level location. And finally, most “beginner” videos start with how to make sketches rather than how to properly set up a project. I would like to see tips on setting up the structure of a project. (Yes, I am very new to Fusion 360)
You're an amazing teacher...Thank You
This is awesome!
Thanks for this, very helpful
This video probably helped me more than any other! Thanks
That sketch command is super helpful and great to know! I would love to see more videos on commands like that in the future.
great video. What else can we do in the command line?
Sir you save me, Im noob in fusion and i was strugling with this issue and having a hard time figuring out how to solve it, thanks, im suscribing right now
👍 Thank-You! 😍
I always have problems constraining splines. At times splines (single and multiple) cannot be moved, yet they are not recognized as fully constrained. 😲
You're welcome! Totally, splines are difficult constrain and not always necessary to do so in my opinion.
Perfect timing and content. Now I know how to resolve these issues. An area I struggle with from time to time is getting holes places where want them, I can usually get them placed but not sure what I did. Maybe a good topic for you sometime.
Sounds good!
Coming from SolidWorks which has a "Fix" command, Fusion has been a tad challenging to get to a fully constrained sketch every time and this video is a great reminder of trouble shooting tools. I am struggling with the details of joints, specifically gear train joints and properly animating say a 3 gear system or say a worm gear to spur gear setup. Joints are done nearly completely opposite in Fusion as compared to SolidWorks, so I am probably at a disadvantage coming from that space...
There is a Fix command in fusion. It can be found in the constraints section of the sketching menu. It is the icon that looks like a padlock and is labeled "Fix/Unfix" (edit: by the way, instead of changing to black lines, the "fixed" sketch elements switch to a green-ish color. So you will then possibly have these colors on your sketches: blue: un-constrained; black: constrained; purple: projected; green: fixed)
And yeah joints are very different. I messed around both with solidworks and inventor a bit, and think they were similar to each other. Fusion is 180 degrees from that. In many cases it works quick and easy, but in some cases I miss that control, even with it being a bit more tedious in most cases.
@@BlackSmokeDMax That Fix command in Fusion is about restricting movement, thats why its in the constraint menu. The Fix command I am referring to in SW is like the Sketch.showunderconstrained command and tells you want is not not constrained in the current sketch. I think the sketch command in Fusion is as close as we will get in Fusion..
@@lgarnand318 ah, I see
Me too! I miss the sketch dr in Solidworks but luckily these Fusion workarounds can help.
Can you show us why the miror command does not work as expected with bodies. Often after the mirror line is selected you can see the outline on the otherside but after you cluck okay it throws up different kind of errorors, most often cant computer patern ...blah blah blah but the thing is it did computer to the pattern ...it just wld not apply it to the body.part it showed up in. This has driven me crazy many time. Please help. Thanks
How do I connect broken lines to just one line and How do I delete any lines on top of each other
Filleting say two corners of a rectangle with a radius of half the dimension between the two points - most times it fails?
I have a fully constrained sketch and it extrudes but when I create the manufacturing model and try to select the profile it is segmented and won't select. Any tips?
The biggest source of problems for me is SPLINES. They make wonderful curves but they seem “buggy”. Sometimes I can edit them, sometimes I can’t. Also, if I move things that include a spline, the spline often doesn’t maintain its connections.
Anyone have a problem recently when you click post processing?