Go BIG! With the Elegoo Neptune 3 MAX 3D Printer! - Step By Step ASSEMBLY
HTML-код
- Опубликовано: 15 фев 2023
- Complicated to assemble? Nehhhhhhh! :D
Link to it: www.elegoo.com/products/elego...
---------------------------------------------------------------------------
Support the channel on Patreon!
/ dutchrc
Equipent I use:
Frsky Tandem X20: bit.ly/3iJLaxg
Radiomaster TX16S mkII: bit.ly/3oTcADe
Orqa FPV Pilot.One FPV Goggle: bit.ly/3uCAHZC
Indoors camera: Canon 5D mkIII
Lens: Tamron 28-75 2.8
Outdoors camera's:
+ Sony Experia PRO-I
+ GoPro Hero9 Black
+ GoPro Hero10 Black
Tools:
+ Mustool MT826 Multimeter: goo.gl/t7UwWi
+ TS100 portable soldering iron: goo.gl/3w8oCk
+ ToolCraft ST-100D soldering station
+ Steinel Gluematic 3002 hotglue gun
+ several Dremel's
My Instagram page:
/ dutchrc
DutchRC Adventures™.. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of DutchRC Adventures. We are not directly affiliated with any of the vendors or manufacturers in this video. DutchRC Adventures is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the DutchRC Adventures film series broadcast on RUclips is intended for entertainment purposes only.
#DutchRCadventures #RClife #RCfun 
Наука
Complicated to assemble? Nehhhhhhh! :D
Link to it: www.elegoo.com/products/elegoo-neptune-3-max-fdm-3d-printer-massive-printing-size-of-420x420x500mm
Fantastic, dude... This printer is a real monster! 😃
Stay safe there with your family! 🖖😊
Thanks as always brother! :D
I've been "away" a bit as I needed to upgrade my computer.. it had been on it's last breath for a few years already ;)
Things good over there??
Cheers and have a good weekend!
@@DutchRC Everything is fine, thanks! Just a bit hot. 😬
What about there?
I need to buy a new PC as well... That's the main reason I didn't started making videos again. But, you know... The construction isn't finished yet. 🙄
I hope we can get it all done until mid year. At least I hope so. 😬
@@MCsCreations things are Good over here and yes building a computer is Expensive these days or what? I've put it off during the chips-shortage ofcourse but damn..
I actually still use the video-card from my old pc as that is the costliest part :P
Thank you so much this is my first Filament printer and i was extremely confused at first but this video really helped me out thank you 😊
Well there you go! That's what the video is for :)
Have fun with it & thanks for the comment!
you're right. that did not look any different then most any printer and funny how they forgot about that cable 😂
Nope! Easy peacy and actually easier then cheaper printers.. things fit better, and the manual.. well yeah haha :D the cable.. other then that it was Good :)
I paused and rewound the video a few times to make sure I was doing it correctly so it took me a bit longer. But it was a very thorough process!
There you go! Glad the video helped you out :D
Happy printing :)
Nice Hudson Bay Coat, hard to find. Thanks, good assembly video.
Thank you Linda..
Could have been a Hudson Bay but..... it's actually a Gant fleece (probably completely impossible to find :$ )
And thanks for that as well ofcourse :)
Excellent. Thank you SO MUCH for this. Very helpful.
For what it’s worth, the official Elegoo setup video for the Neptune 3 Plus (next size down from the Max) does not run the cable between the lead screw and the frame. They place it on the rear of the lead screw, in the open air. 16:38
Thank you very much! Glad you found the video to be usefull! That's what the video is for :)
Hmmm yeah.. O I am actually unsure what is better or worse ;)
At 16:56 .. I got a totally different design of clip that frankly doesn't seem to work as well. I looked it up online and some people were saying they got the same one also.
Not sure as a Round clip for a Flat cable did look a bit weird.. though I will admit it Worked..
Maybe PRINT a better clip?? :)
I just orderd one for my ironman cosplay cant wait for it to arrive. I am a bit scared for my space tho hahah
hahaha yes this is not a small machine ;)
Thanks a lot...
my pleasure :) glad you found the video to be usefull
@@DutchRC thanks to your video i set up my printer
Don't run the main cable between the frame and lead screw!!!!
This step is poorly shown in instructions, but it should be behind the screw.
There are two screw holes, and you need to place the plastic part to the back hole, facing backwards, and place the cable behind the lead screw.
Thanks for the tutorial, this is not your fault and instructions should be fixed to make it clear.
Indeed not clear in the instructions.. On the flip side I don't think it matters much as the "screw" didn't really rub the cable.. the other way around would indeed probably be better
RJ11 :) RJ45 is the big ethernet
Correct.. good catch :)
If I may,.... Where are the cooling fans?
have a look at some pictures of the printer.. the fans are on the Sides of the head
@@DutchRC ah ok thank you. I am still new to all this
@@Phant0mwolf-ProductionsLots to discover and figure out in that case ;)
@@DutchRC Indeed and it's exciting to learn