Elegoo Neptune 3 Plus - 3D Printer - Unbox & Setup
HTML-код
- Опубликовано: 8 фев 2025
- Amazon Links
Neptune-3 Plus: geni.us/BuAQ2h
Neptune-3 Pro: geni.us/vzwO
Recommended: geni.us/JustVlads
www.elegoo.com...
ELEGOO Neptune 3 Plus FDM 3D Printer with Larger Build Volume of 320x320x400mm³
Dual-Gear Direct Extruder
The new dual-gear direct extruder with a better grip on the filament and strong pushing force for smoother filament feeding and more stable & accurate printing, which greatly reduces the risk of nozzle blockage and under extrusion, and printing well with PLA, ABS, PETG and even flexible filaments like TPU.
Larger Print Volume
The larger-than-average build volume of 320x320x400mm/12.59 x 12.59 x 15.74 inches gives you enough space to freely arrange your prints, print larger models, or carry out batch printing with high efficiency.
Auto Bed Leveling
ELEGOO Neptune 3 Plus adopts a non-contact high precision sensor to collect the deviation data at 49 (7x7) points of the hotbed, and then automatically adjust the Z-axis height to compensate for any irregularities and unevenness of the printing bed. There are also hand-twisting knobs underneath the hotbed to fine-turn the print bed with a single twist, thus ensuring a perfect first layer print.
PEI Magnetic Platform
PEI magnetic platform with special coating and spring steel sheet for good adhesion and anti-warping, just gently bend the print steel plate to release or pop off the prints. The 420W high-power hotbed can quickly heat up to 100°C.
Z-axis Dual Lead Screw
The dual synchronized lead screws and dual-motor drive make the Z-axis movement more stable and smooth, avoid printing deviation driven by a single Z-axis lead screw motor, and improve printing accuracy and stability. With STM 32-bit motherboard, the X/Y/Z/E axes are all driven by silent drivers to effectively reduce the printing noise to below 50dB.
Removable Capacitive Touchscreen
The 4.3-inch removable capacitive touch screen can be operated by hand-held or fixed on the base. Built-in print model preview function to preview the model image before printing, and observe the printing progress by previewing the real-time comparison image of the printed model.
As an Amazon Associate I earn from qualifying purchases
My website: www.justvlads....
New 3D Channel: youtube.com/@Just_Print
Neptune-3 Plus: geni.us/BuAQ2h
Neptune-3 Pro: geni.us/vzwO
This is hands down the most solid video on this printer and program. At first I was like Wtf, but this hobby is kind of hard to get into. I’ve watched just about every video you can find on the software and printer and no one was more detailed than this. Props bruv
Im a senior and your explanation was top notch. I will be referring back to it when my machine arrives! Hey I’m excited! Ya i need to get out more !
Ordered yesterday 13.09.2024. for €239,99 EUR. This gonna be the first printer in my life! Great video Vlad! Hope i can make my 3D print of the monument without many issues. Wish me luck!
I ordered a N3+ yesterday!! So excited for it. Have you gotten yours yet?
@@hallowedhydra Arrived for 7 days! I use it every day till the night hours. I just can’t stop :)
@@buzludzhamonument3d how is it? I'm currently trying to decide whether to buy the N3+ or the ender 3 KE
@ it’s fine but i have won Creality K1C which is way way faster. But i will keep the Elegoo too.
@@buzludzhamonument3d wow congrats good for you, just a couple of months after your first one as well! Yeah well I think I’ll go with the N3+ just because of the bigger printing size tbh. I feel like that might just be more important than speed or whatever other features the ender 3 ke has
Just got my N3Pro yesterday and for a beginner, it's an awesome printer. Looking forward to this Plus.
Great video!
To level anything, only use 3 points, 2 on the back, 1 on the front. Or opposite sides. In a triangle. Level the 2 first, then the one opposite to match the two. Once it's level in a case like this, just snug up the rest to support it level. Any other way will take much longer.
I just ordered this plus sized printer last night, can’t wait to set it up and give it a go, great set-up/review video, liked and subbed, thanks
How was it?
Great review and setup.. Answered a load of questions for me as got mine arriving soon. Thanks.
Thank you so much for this video! This is by far the best video I've seen for new users.
This is a solid detailed review, amazing work and thank you!
Great review! I'm expecting mine on Monday. Thanks for the insights.
They just got this back in stock so I decided to order this one over an ender, anycubic, and prusa. Prusa just seems outdated even if it does work well. Can’t wait to use it!!
The best setup video! I had a lot of trouble with Elegoo's own, but this was sp helpful
Super helpful thank you! Just got mine today, cant wait to get it up and running
The draw back of not having a storage bin is a reason to print a cool storage bin:)
@ 12:10: the wire should be parallel to the arm for the spool to prevent cable kink. This will also center the spool and weight of the upper gantry.
Did you seriously tell us to watch the ELEGOO assembly video after you've shown how to do it in a precise way? :D
That red rocket is soooooo cool and smooth I love it!
One of the best setup videos. Thank you.
Amazing review, I just pre ordered mine, never 3d printed before, I can’t wait 🙌🏾
Thanks for another great review. Just ordered it - unfortunately could not do so thru the link (Lunar New Year related issue). But thanks again and again Vlad.
I had to return my 3pro today . It kept having issues and over the weekend the screen locked up again and this time I couldn't get it to unlock no mater what I did . Unfortunately they didnt have anymore for an exchange so I had to accept a refund instead . When it printed the prints were nice in my opinion , but I dont know enough to get the machine to respond and get the touch pad working again . I like the look of this printer and when I try again I think I my upgrade to this machine .
Can't wait until I can order one!
Awesome vid from beginning to end. Really appreciate it. I wish I would've copied the contents of the thumb drive to my computer before running the budha test print. It's almost done tho. Cheers man! Thanks!
Thank you very much for this vid very helpful all the best
great video. extremely helpful
Great review.
The biggest disadvantage of this type of design is combining the bed with the Y-axis. The bed including the print object is really heavy. This makes the Y axis always bed! With this size and price, the CoreXY is much better!
Amazing video!
Thank you
Awesome video intro 🤩
Great video. I'm new to fdm printing and I just got the Plus. I've almost finished the test filament that comes with the printer, and I wanted to know how to unload the filament and put in a new one. On some videos I've seen, on different printers, they do it manually, extruding some filament and then pulling it out quickly. Do I have to do it with the Plus too or can I use the function you show at 34:10? Thank you
Helps me alot.Thank You.
All that touching of the build plate is making me anxious x'D
great video, helped a lot, thanks!
Sadly you can't order these. I would love to get a plus.
US is in stock now
matter hackers has them available for preorder on incoming stock if you’ve not ordered from them before you can sign up for their newsletter and get 5% off, which does work on the printer
They're back in stock
Why not
@@JaceEntertainment they were out of stock for several months
It seems the 'Pro' prints a touch better than the 'Plus'. I assume it’s because the bed is springy on the 'Plus'?
Great detailed video. Does this printer have an all metal hotend?
Oh yes, the unobtainable Neptune 3-D plus. Since you can’t actually buy one of these what would you buy instead?
I set up mine and this video helped me a lot thanks! I was wondering, I’m sensing a squeaking on the bed (while it moving back and forward) how can I fix it?
great video ...thanks a lot
can the Neptune 3 Pro use almost all the filaments (PLA for example) or are there many limitations regarding materials, due to the fact that it cannot print with a very high temperature?
I ordered one but I’m considering cancelling and ordering a P1P
I reached out to their support and they said it won’t be available until mid-end of February. :( I’ll definitely be waiting for it.
I bought mine January 6. And got it yesterday.
I just bought one on Amazon 2 days ago and got it today.
Well done.
Great video! Thank you. Could you please link the files for the models that you printed in this video?
Hello!
If you used both, which one do you prefer?
Ender S1 Plus vs Neptune 3 Plus.
Thanks for the answer.
That last rocket plane thing reminds me of the North American X-15
My offset is -2.56 is that right? The back left adjuster hasnt got the same springs for some reason
Mine appears to rub the bed as it prepare to start printing. Don’t want it scratching it Suggestions?
Great video.
I’ll buy this off you. I really want one, but they are on back order. I’m serious. What do you say?
Hi! i just ordered my neptune 3 plus. Super exited to get it. But i was wondering which settings do you recommend for it? for example, im interested in printing armor and star wars helmets. And im a beginner, and im worried my prints wont be good. Please help!
Okay but when will it and the Max be back in stock.
Whats your setup for the rocket?
21:02 I have a free wheeling tram wheel on both sides of the x gantry, on the left side its the top wheel and on the right side its the bottom wheel. Should I be concerned as no amount of spinning the left and right eccentric nuts changes anything?
How would you compare this printer with something like the Creality Ender 3 S1?
I put in everything just as you did and these prints are coming off awful like it’s running to fast or something, I tried running the Budda 3 times now
Would like to see a speed test of this printer 😐😁
How is this compared to the Ender 3 MAX?
This is a lot better.
May i know if this better than ANYCUBIC KOBRA MAX????
it doesn't show you on the LCD how much time untill the print it's done?
Anyone knows if you can swap the power cable for a longer one, and if so, what details should I check before I burn down my house.... If this is not possible any special extension cords which are save enough to cover some distance? Usually I would avoid using extension cords for such devices but I can't seem to find clues on the internet....
How did you installed on mac? I have a m1 macbook but when I open it says disco image is damaged so I can't install it. Please help me
How tall is this printer with the spool holder
how do i loosen the 2 bolts on the left side? my weels is to tight :/
Not being a jerk, but ABS needs 100c bed temps...over serveral printers, 100c always produces less warping if not enclosed
awesome review! just got my plus in yesterday, was wondering if you switched the voltage from 230v to 115v as suggested on the screen protector? i could not for the life of me find that switch and was wondering if you have done it on yours...
The printer voltage is preset to your delivery address. If you need to switch it, the bottom cover will need to be removed and the power supply can be switched.
@@JustVlads ah great, thanks! I'll check it out and confirm.
Think I may remove the bottom plate just to make sure that it is set correct when I receive my machine.
Elegoo or Creality ?
You messed up my ender 3 v2 neo setup because you cannot describe belt tension in a video.....
Still love you Vlad!!!
Cost to performance wise, do you prefer the neptune 3 or the ender 3 max neo?
Please tell what actual MCU are on boards, it's single most important thing now. Almost everyone use close-but-not-clones of STM32 which are unsupported in vanilla Marlin. I can see this one is actual ST but not in every video it's visible.
Mine didn't come with support bars
I am currently setting up my Neptune 3 plus and when I first turned it on after assembling it I pressed home and the nozzle went into the bed and left an indent, I tried leveling it but anytime I press home it will again sink into the build plate and burn a hole, has anyone had this problem?
Why don’t they have the extruder motor flipped and closer to the rail? I’d bet it would be better for weight distribution no?
Or make an in line version of direct drive so there is less outward weight and it’s more stacked on top of the nozzle
You sound like a young version of “despicable me” guy.
How does this compare to the artillery x2
Is this video sponsored by elegoo or is this a genuine reaction
Great videos, i always watch twice before buying one, but i have a question. So for thé first file it gives you thé preview image, but when printing any other file it doesn't give any image, i tried thé JPEG script in Cura but doesn't work, Anyone having thé same problem and know how to fix it?
I can't install Elegoo Cura or add the printers to normal Cura
i want one but there out of stock
i did NOT get a clipper and spatula
You didn't measure the printer's footprint; you measured the depth of your desk. I would have liked to see from the printers back foot to the front foot, also side to side to see how much room it will take up on my desk. I don't need to know your desk is 24 inches wide.
I followed your video to the t, and when I try to level it, the nozzle is too far away from the build plate. I turned the wheels all the way where they were loose, and it still won't get close to the nozzle. Any suggestions
same thing with me, did you figure it out?
Is it possible to reduce the ringing and ghosting artefacts?
Yes, do many of the same prints with different speeds and see which looks the best. Also try belt tightness same way.
Nice video How do I unload the filament when I’m done printing and wanna put my roll back in the Eibos filament heater..? Thank you
If the filament is stuck, preheat the nozzle and it will come out easily
@@JustVladsthank you… it’s not stuck.. can I just leave it in and turn my machine off..?
@@mitchelbenjaminsr1587 Yes, you can leave it in the print head and turn the machine off but for longer storage its a good idea to put the roll in a sealed bag to protect it from moisture.
When you compress the bed springs to half way, do you put an actual level on the bed to verify it’s level in all directions prior to the auto bed leveling?
Late post lol. But I'd assume no because you're not looking for level to floor, but level to nozzle.
I ordered my N3Pro on Dec 8 and still have not received it and now they are telling me they
won't be back in stock until Jan 23. So be careful ordering from Elegoo.
India m mil sakti h
I love you.
Would you please compare the noise of neptune 3 pro and plus while printing and standby
Using apple watch or a device which we can see it in decibel
Why an apple watch? There are literally devices built solely to tell you the decibel level of sounds. And they cost literally a fraction of the price of an apple watch. Not to mention an apple watch wouldn't give you even a close representation of actual decibel levels as its microphone is relatively low quality.
@@YourLocalRaccoon yea but if you already have an apple watch it doe’s the job quicker than going an d buy a device also im happy with the apple watch results as few decibels difference won’t make any change in my experience with the device
@@YourLocalRaccoon what i want to know is the difference of the two printers, i dont care if they are 50-55 db or 60-65 i just wanna know the difference
@@AMForouzani decibels are non-linear, 60 is significantly quieter than 65, so yes "a few decibels difference" is a massive difference
@@YourLocalRaccoon you didn’t understand what i ment
2024 best printer shop home?
Are you Romanian ?
Hi
No auto bed leveling and all that messing about with rollers and wheels is a big No No for me.
Use a square to make sure the gantry is square to the base. The rods are so you can adjust it. Don't install them like this guy.
13:54 funny
Am I the only one who didn't have any rods or any rods even being mentioned in the instructions
You loosen your belts too much.
These printers are dead. Buy a P1P instead. Don’t waste your money.
Care to explain your statement? How are these dead, they just came out....
Not only was that a stupid statement, but this printer is bigger and half the price of a p1p......
instead of buying a large build volume printer for cheap go and buy a small one for double price, sure kid :)
Very outdated printer.