I know this video is a few years old. I'd like to say thank you for such a detailed, descriptive video. It was exactly step by step perfect. I just got my Z125 and this was my first mod. Exhaust to come shortly.
I purchased both fender eliminator kits from Vagabond - one uses the Oem turn signals and the other no oem turn signals. Both kits arrived promptly. Solid products. Thanks Vagabond.
Just got this product and installed it. I like the way it makes use of the OEM parts but still gets rid of that annoying extended fender. It's well made and a good value. Thanks!
Just installed this on my Z. The bike looks ‘right’ now. This product is top notch. The video makes the install look a bit easier than what it actually is but every detail that you need to know is depicted here. It helps if you’re the mechanically inclined type but you don’t need to be. I’m not and the kit went on perfectly and looks awesome. I looked at a good number of different kits but what sold me was this video. Thanks
Awesome video...great attention to detail... I bought your kit today for my z125 vs the more expensive Yoshimura brand. I like how yours uses the factory plate light and don't have to cut any wires. Looking forward to it's arrival and will be following your detailed instructions. Well done!
mines Arrived today ! its a really nice piece good quality very excited thanks again !! i like it when i dont have to buy extra all my oem light fits in its a must .
Your passengers may bump into the signals a bit more often when getting on of off the bike, but in the riding position there is plenty of leg clearance. Thanks!
If you look at 12:29, it seems that the reflectors are on their own bracket which mounts directly to the 2 license plate holes, so if the plate fits they should fit. The reflectors look to sit lower than the bolts so I can't see them running into the turn signals.
I got so pissed off trying to put them in. I also stripped a screw trying to take it off the stock fender, and had to get an autoshop to get the screw out. but it's worth it thing looks awesome and im sure it will last and stop water and stuff from getting up in their.
Eric War Stock...it maxes out at 67 on flats for 230 pound rider(including gear). So if you want to go faster, you'll need to mod the bike or get a bigger cc engine bike. Otherwise, 120+mpg has sold me on this or the grom.
I know this video is a few years old. I'd like to say thank you for such a detailed, descriptive video. It was exactly step by step perfect. I just got my Z125 and this was my first mod. Exhaust to come shortly.
I purchased both fender eliminator kits from Vagabond - one uses the Oem turn signals and the other no oem turn signals. Both kits arrived promptly. Solid products. Thanks Vagabond.
Yay! Glad you like them :) Thank you for your business!
Vagabond Motorsports
Just got this product and installed it. I like the way it makes use of the OEM parts but still gets rid of that annoying extended fender. It's well made and a good value. Thanks!
I don't even have a bike, but I watched this entire vid. Very well done.
JJackMoto
I’m thinking about getting that Z125, but no way that junk hanging on the back can stay....
Are you stoned?
Just installed ytd. A friend of mine brought this back to me all the way from San Diego. I added a small plate at the bottom to cover up the wiring.
Just installed this on my Z. The bike looks ‘right’ now. This product is top notch. The video makes the install look a bit easier than what it actually is but every detail that you need to know is depicted here. It helps if you’re the mechanically inclined type but you don’t need to be. I’m not and the kit went on perfectly and looks awesome. I looked at a good number of different kits but what sold me was this video. Thanks
So impressed by this DYI, I ordered one in the middle of the clip. One of these best on the tube.
Awesome video...great attention to detail... I bought your kit today for my z125 vs the more expensive Yoshimura brand. I like how yours uses the factory plate light and don't have to cut any wires. Looking forward to it's arrival and will be following your detailed instructions. Well done!
I just installed this kit on my 2018 red z125. Thanks for the great video, install went great and looks factory! Great product
This is a great video. No nonsense, everything is helpful
Nicely done! Waiting on my vagabond fender eliminator kits for my 2 z125’s.
Do you include decals with this eliminator? Ide be proud to display the decals in conjunction with this awesome product!
mines Arrived today ! its a really nice piece good quality very excited thanks again !! i like it when i dont have to buy extra all my oem light fits in its a must .
great video and it really helped speed up the install this past weekend on the bike, thanks!
I’m trying to do this but there is no barbed tooth to press down on the piece holding the tail light.
Picking up my Z today and wish I saw this video yesterday when I ordered my kit I would have purchased this one.
Great install video. Looks like a very precise product. Super clean look! Does VM make a fender eliminator for my Z1000?
Don’t know if still active but will this fit a Kawasaki KRT 400 or would it need some changes???
Great video mh man! It helped immensely!
damn. this is straight up well done.
Great video, thanks! 👍🏼👍🏼
Just did this myself thanks for the vid, everything was super easy except those stupid screws on the signals
Great product and video, do you think this will make it more uncomfortable for a passenger? (the turn signals new position I'm talking about.)
Your passengers may bump into the signals a bit more often when getting on of off the bike, but in the riding position there is plenty of leg clearance. Thanks!
Can I still mount the side reflector bar (behind the plate) to this eliminator. The round reflectors are mandatory in my state.
If you look at 12:29, it seems that the reflectors are on their own bracket which mounts directly to the 2 license plate holes, so if the plate fits they should fit. The reflectors look to sit lower than the bolts so I can't see them running into the turn signals.
Great video.how much would shipping be to UK? cheers
+Mark Ullyett Thanks!! shipping to the UK is $32.50
Which fender eliminator is better, vagabond or TST?
Does this kit still available?
Dude the HARDEST PART of the install is installing the signals in to the eliminator!!! Other than that everything is so easy!
We agree!
I got so pissed off trying to put them in. I also stripped a screw trying to take it off the stock fender, and had to get an autoshop to get the screw out. but it's worth it thing looks awesome and im sure it will last and stop water and stuff from getting up in their.
I really want this bike, for my first bike, any pros and cons to that?
Eric War Stock...it maxes out at 67 on flats for 230 pound rider(including gear). So if you want to go faster, you'll need to mod the bike or get a bigger cc engine bike. Otherwise, 120+mpg has sold me on this or the grom.
@@motoryzen I'm 143 pounds, and mine stock only does 58-60 on flat, down hill rev limits at 66 and only gets about 80 miles to the gallon.
Check out this awesome little bike
ruclips.net/video/CzfV11sXPU4/видео.html
I would have chuck that thing across the room. By trying to get the signal lights in lol
ordering kit now !!!!!
youll made this sale too easy lol !!!!!!
How to buy this
how you call this staff and how much is it & shipping fron the philippines?
lol, i totally agree with the yamaha turn signals!
Great video, thank you!
Very good and easy to follow install.
Also just ordered. Thanks.
should i disconnect the battery
for the installation you do not need to disconnect the battery.
loved the yamaha throat chop lmao!!!!!
You make this look so easy lmao
Man, I bought the TST kit. I like this one better. 😣
Honestly I prefer the grom in every way
I was gonna buy a grom too but I change my mind when I heard the news about Z125 coming to the state. all about preference.
Honestly I prefer your mom in every way
goofy grom
lololololololo
The Z125 out performs the Grom in every way...
This is what I've been looking for
Look up what vagabond means in haiti
I watched the whole video and I don’t even have one
I will surely break it if i try this :(
too much work i keep the stock one ....
nice product. WHY do all manufacturers fit those ugly pointless extended fenders? they look horrible