you guys are awesome! it's rare to find a company that not only sells great products, but makes great videos and supports the riding community in forums. I was tossing up between this or the 2Bros tarmac...went with the yosh. Looking forward to buying some bits and bobs from you guys soon (chimera intake and a fuel controller). Thanks for all this great content!
Thank you for the response. I double checked and everything was connected. I re- checked the tightness as well but check engine light is still on. I rode the bike for about 5 mins and still on. I disconnected the o2 sensor after riding for 5 mins and re-connected it back, turned the bike on and check engine light is still on. :(
I'm glad that more parts are making its way to the z125. Looking to get either a grom or the z125, I might wait awhile so more products can be developed for the z125 before choosing between the two. I know you folks had the z125 only for a short while, but between the two bike which one you think would be a better buy, any feedback would be greatly appreciated. Thanks.!
A couple of questions: 1. I live in Cambodia and just got a z125 pro from the official dealership (more expensive than buying from a street dealer but at least I know the parts are original). I don't know anything about bikes and I don't trust local mechanics to do it for me. If I buy the exhaust (and a few other things I saw on your site like fender eliminators), am I likely to be able to install this all myself following your videos without any mechanical background or knowledge? 2. I've seen people say that if you change the exhaust you also need a power commander and other stuff otherwise you just mess it all up. Is that correct and if so, is there a simple list of stuff I'd need? I don't want to buy one thing then wait weeks for something else to arrive, I'd rather just order it all at once. 3. I'd love to find a meaner looking headlight/casing, does such a thing exist yet?
HardRacing: I recently installed the Yoshimura exhaust on my z125 pro but I now have the check engine light on. How do I get rid of the check engine light? Your feedback is appreciated.
Thank you for the response. I double checked and everything was connected. I re- checked the tightness as well but check engine light is still on. I rode the bike for about 5 mins and still on. I disconnected the o2 sensor after riding for 5 mins and re-connected it back, turned on the bike and check engine light is still on. :(
you guys are awesome! it's rare to find a company that not only sells great products, but makes great videos and supports the riding community in forums. I was tossing up between this or the 2Bros tarmac...went with the yosh. Looking forward to buying some bits and bobs from you guys soon (chimera intake and a fuel controller). Thanks for all this great content!
Thank you for the kind words and reply.
I was installing my exhaust today when I noticed my stock 2019 z125 o2 didn’t fit is there an adapter I need to purchase separately?
Thank you for the response. I double checked and everything was connected. I re- checked the tightness as well but check engine light is still on. I rode the bike for about 5 mins and still on. I disconnected the o2 sensor after riding for 5 mins and re-connected it back, turned the bike on and check engine light is still on. :(
I'm glad that more parts are making its way to the z125. Looking to get either a grom or the z125, I might wait awhile so more products can be developed for the z125 before choosing between the two. I know you folks had the z125 only for a short while, but between the two bike which one you think would be a better buy, any feedback would be greatly appreciated. Thanks.!
Im ordering this exhaust and chimera intake will I need a tune ?
A couple of questions:
1. I live in Cambodia and just got a z125 pro from the official dealership (more expensive than buying from a street dealer but at least I know the parts are original). I don't know anything about bikes and I don't trust local mechanics to do it for me. If I buy the exhaust (and a few other things I saw on your site like fender eliminators), am I likely to be able to install this all myself following your videos without any mechanical background or knowledge?
2. I've seen people say that if you change the exhaust you also need a power commander and other stuff otherwise you just mess it all up. Is that correct and if so, is there a simple list of stuff I'd need? I don't want to buy one thing then wait weeks for something else to arrive, I'd rather just order it all at once.
3. I'd love to find a meaner looking headlight/casing, does such a thing exist yet?
Monsta Much, thank you for your post.
Please send email inquiry to our sales dept. and they will answer all your questions and get you taken care of.
HardRacing Will do, thanks.
Have you tried one on a Grom yet? Would it fit with a few alterations or is it know where near?
sound much better than the stock exhaust system.
MUCH, MUCH Better.
How to get rid of the engine check light ?
Usually if you just ride around for a while it will go away.
There is a multi step process in the Service manual, you can do as well.
HardRacing: I recently installed the Yoshimura exhaust on my z125 pro but I now have the check engine light on. How do I get rid of the check engine light? Your feedback is appreciated.
There should be Zero reason for a CEL, unless you forgot to reinstall the O2 sensor or plug it back in.
Thank you for the response. I double checked and everything was connected. I re- checked the tightness as well but check engine light is still on. I rode the bike for about 5 mins and still on. I disconnected the o2 sensor after riding for 5 mins and re-connected it back, turned on the bike and check engine light is still on. :(
did you install or change anything else on the bike when you installed the exhaust ?
+HardRacing No, i did not. Only the exhaust.
Kawasaki ended up giving me a new o2 sensor. No more check engine light on. Yay!!
Does the loop on the exhaust help for top speed or is this exhaust more for acceleration?
Yes, that's what they say.
sales @hardracing
You didnt help.
Which one is what "they say"? Speed or acceleration ?
Yes!
my o2 sensor is damaged it's was over tighten by the dealer where can I find replacement
Since it's an OEM Part.......... Unfortunately, only from the Kawasaki Dealer.
+HardRacing thank you
Very welcome.
+HardRacing another question how do I turn off the engine light on the bike
Yulie Ward-Paman
I hear it cost $250
What is the brand of scredriver u use there, the yellow one
At what time stamp ?
HardRacing already found... its dewalt screwdriver. Thx
Is a power commander required after an exhaust upgrade?
It is not required. Eventually you will probably want to get one.
But for now, you can ride without one, and be just fine.
不知道买的话是多少钱呀
should I get z125 or grom? please help.
It's totally personal preference.
They are both fun bikes. But for sure the Grom is much more popular.
HardRacing many thanks.
Very welcome.
Sovichea Chou just got my z125 nd i love it 👌
Excellent.
No, i did not. Only the exhaust.
do you have en ebay account? im in Indonesia. usually buying through ebay:)
Unfortunately, we don't do paypal.
Sorry.
Teflon tape really? don't sound like it smells to good
We've been using that trick for 20 + years.
Works great. No mess, easy to use. Seals tight.