Thanks a lot, I found this really useful for real. I think my biggest problem is I’m not getting much height and landing back wheel first or doing a 270, so I’m gonna try and do the bar hump motion with a bunnyhop like in the video so I can get a feel for it.
learned 360 like yesterday and i was stuck in the 270s like you but a friend told me when im in 270 to throw my head up and suck my knees more and you should always look down
the explanation was very clear and very easy to understand and I immediately put it into practice and succeeded in doing 360, thank you very much sir 🤜🤛
thanks for sharing the body position that works for spinning 360s, i was trying to pull up my back tire with my legs but it wasnt working. i can do a 3 but im always stuck out straight like a pencil.
Hey Dustin, I tried practicing 3s recently and tried your advice of less carve and it definitely helped. I’m still having problems lifting the back wheel. Would bringing my legs closer to me help lift it up? I always notice people have their knees below the top tube when their knees are bent, I notice I do the same with halfcabs. Would it be this sort of motion that I need to apply to my 360?
I'm not sure what you mean by "closer to me" but if you're back wheel keeps landing first, you need to A) keep practicing your basic bunnyhop to really like pro level of bunnyhops or B) get your heels to basically touch your ass lol that will help get the backend up
@@DustinNotJustin I mean B lol, it’s kinda difficult to explain. How do I do that, my bunnyhops are good, I mean I can hop up a large 4 stair. And my biggest question actually is, when’s the best time to bring the back up? I see a lot of people bending their knees at 180
Biggest thing for me was lifting my legs up and holding the rear wheel high for long enough to do the full spin Didn’t matter how hard I carved or how fast I went if I didn’t pick the rear wheel up I’d do a 270 flop
Tried for years without realizing what mistakes i was making. I finally decided to study others and film myself to figure out what was wrong with my technique. Then adjusted and got it :)
Been waiting on this. After 2 years of no biking (because of hand injury) almost forget the 360 (been doing 360 at least on pegs hight). Thanks Dustin! By the way, how’s tall your bar?
I ride the Merritt Andre Bars. Which I believe are 9.25? But I run my headset spacer on top of my stem because I don't like tall bars. But they're free so, gotta adjust :)
haha thanks man. I use these Shift Knee/Shin combo. Pros: Very affordable, fit under my jeans and actual plastic (not just cloth) Cons: slide down halfway down my knee, straps around shins only and doesn't cover the lower shin close to the ankle. I should've done a Product Review on it lol www.amazon.com/Shift-Racing-Enforcer-Adult-Motorcycle/dp/B00PQWCG6S
@@DustinNotJustin hahahahah bro you just did. copy and paste on Amazon lol... I will subscribe now, I asked for an inch and got a mile. Thanks, man looking forward to more good content.
Bro you explain everything like a master, would literally pay you for these videos. 🙏🏼
mars thank you my man. Free of charge for life 🤝
Another great video Dustin, im 53 and coming back to the craft and your helping so much 😊
Swiped up to get here, congrats on 10k 💪🏼
thanks Jordan!
awesome
I got better at them :D
Another sweet as fug video.
Thanks for all these recent uploads my guy! Really appreciate it
thank YOU for taking the time to watch it :)
Thanks a lot, I found this really useful for real. I think my biggest problem is I’m not getting much height and landing back wheel first or doing a 270, so I’m gonna try and do the bar hump motion with a bunnyhop like in the video so I can get a feel for it.
I think carving less will help you have better control of your bunnyhop
learned 360 like yesterday and i was stuck in the 270s like you but a friend told me when im in 270 to throw my head up and suck my knees more and you should always look down
the explanation was very clear and very easy to understand and I immediately put it into practice and succeeded in doing 360, thank you very much sir 🤜🤛
hell yeah 🙌
thanks for sharing the body position that works for spinning 360s, i was trying to pull up my back tire with my legs but it wasnt working. i can do a 3 but im always stuck out straight like a pencil.
The bar hump is major key
great vid man. i was having all these little troubles that other vids didnt mention and u explained it all. cant wait to try that out thx
Glad to help! Hope you get them down 🙌
So underrated man… you and Brandon Nop. I know it’s not race related but there’s so few Asian riders in the US haha
You make it look so easy. Inspired 🚲🚲
Kaylee Peterson thank you dear 😘🙏
Thank you very much for this video❤️🙏🏼
I hope it helps :)
Nice
🙏🙏
Solid advice thanks!
Thank you! Hope it helps!
This is great my biggest issue is that I keep landing in a tire tap and it’s obviously not what I want
Thanks broooo
Anytime my man
Very nice tutorial!
🙏🙏🙏
Yeeew
🙏🙏🙏
Thanks
youre welcome :)
Hey Dustin, I tried practicing 3s recently and tried your advice of less carve and it definitely helped. I’m still having problems lifting the back wheel.
Would bringing my legs closer to me help lift it up? I always notice people have their knees below the top tube when their knees are bent, I notice I do the same with halfcabs. Would it be this sort of motion that I need to apply to my 360?
I'm not sure what you mean by "closer to me" but if you're back wheel keeps landing first, you need to A) keep practicing your basic bunnyhop to really like pro level of bunnyhops or B) get your heels to basically touch your ass lol that will help get the backend up
@@DustinNotJustin I mean B lol, it’s kinda difficult to explain. How do I do that, my bunnyhops are good, I mean I can hop up a large 4 stair.
And my biggest question actually is, when’s the best time to bring the back up? I see a lot of people bending their knees at 180
Biggest thing for me was lifting my legs up and holding the rear wheel high for long enough to do the full spin
Didn’t matter how hard I carved or how fast I went if I didn’t pick the rear wheel up I’d do a 270 flop
Anthony Holdway exactly. This is the biggest issue most people have
yo thx tho ngl this helped alot
Glad to help 🙏🙏
wow, that one helped even more...
more to come :)
how many times you try it sir and how months years you do that?
Tried for years without realizing what mistakes i was making. I finally decided to study others and film myself to figure out what was wrong with my technique. Then adjusted and got it :)
Pretty sure Bob's last name is pronounced like sherbo. Good video.
Lol yeah it was a joke on my end (mispronouncing on purpose)
Been waiting on this. After 2 years of no biking (because of hand injury) almost forget the 360 (been doing 360 at least on pegs hight). Thanks Dustin! By the way, how’s tall your bar?
I ride the Merritt Andre Bars. Which I believe are 9.25? But I run my headset spacer on top of my stem because I don't like tall bars. But they're free so, gotta adjust :)
@@DustinNotJustin got it, how tall are you by the way?
@@perzhu 5 feet 8 inches
Thats what i need to know
Hakerbozo Leńko lmk if you need any more specific help 👍
bro what knee pad/shin pad are you wearing... send a link please... bro you almost got shafted when you did that 360 spin @ 1:59 lol
haha thanks man. I use these Shift Knee/Shin combo. Pros: Very affordable, fit under my jeans and actual plastic (not just cloth) Cons: slide down halfway down my knee, straps around shins only and doesn't cover the lower shin close to the ankle. I should've done a Product Review on it lol www.amazon.com/Shift-Racing-Enforcer-Adult-Motorcycle/dp/B00PQWCG6S
@@DustinNotJustin hahahahah bro you just did. copy and paste on Amazon lol... I will subscribe now, I asked for an inch and got a mile. Thanks, man looking forward to more good content.
SCERBO!
Is it possible to learn this if I never did a 360 out of a bank
Or a fly out
I can do the tire top 360 but not the bunny hop 360
Most likely not enough bar hump and knee bending, but cant tell without seeing it
tried
Helmet where is it
too hot out, danger factor was low
i wanna know how much time have u spent to get the first 360 in ur life
Years lol for a long time I wasn't even close. Finally learned once I started studying the movement I was doing incorrectly
im having a huge problem with tucking my bike D:
Gonna try to do another follow up
Siiiiiiick
thanks my man!
Is 50 cm b hop enough?
It's a little on the low side to be honest. Keep working on it and build up that strength in your arms
@@DustinNotJustin okay
Turn your head way more. You barely had it turned the head turn is a big part of
My friend can’t do a propper bunnyhops but he can do a 360 drop into 17 strairs, meanwhile i can do a bar high hops but can’t even do flat 360 ;(
nizar lutfi lolol like I said in the video, some people are naturals. BUT you also have a lot more time going down a 17 set than on flat
Thanks dude
The pleasure is mine