Power Modules v2 with removable cells | 18650 project | MakerMan
HTML-код
- Опубликовано: 22 авг 2024
- Here I made a 12v S4 18Ah Modular battery pack with removable cells from 18650 cells salvaged from old laptop batteries. I made a these pcbs for the Power modules, where there are glass fuses to show if any cell is shorted and can be easily serviced. I used my previously made 40cell Charging & Capacity Testing Station to know the capacity of the cells for repacking the cells in to proper battery packs.
I was contacted by JLCPCB, about their interest in sponsoring some of my projects and providing me with pcbs to speed up my projects.
Sponsored by JLCPCB
PCBs from $0 (Free Setup, Free Stencil): jlcpcb.com/RHS
How to order SMT on JLCPCBcom
cart.jlcpcb.co...)
40 cell Charging station for 18650
• 40 Cell 18650 Charging...
40cell Capacity Testing Station for 18650
• 40 Cell 18650 Capacity...
Many more 18650 related videos to come.
-------------------------------------------------------------------------------
Music used - Digital Ghosts - Unicorn Heads
-------------------------------------------------------------------------------
stay connected with me in:
Instagram: goo.gl/FfwwnB
Facebook: goo.gl/yLZYTn
to see small projects which not uploaded in this channel.
------------------------------------------------------------------------------- Хобби
I like your project. You are one of the best!
Amazing work👍
You are so great my friend. ❤
Love your project.
You're the best my friend 💪💪💪
Thanks my friend
Can i use this for à Ebike or Elecyric Go Kart or just for PowerBank?
Yes, just make sure you are using thick bus bars.
My use is just for some small outdoor lights which don't require high amps.
Hi, it's an excellent project.
I'm thinking of riding. Could you share the GERBER file? TKs
I love this design and your Modular PowerWall design. I would like to order some of these but I am afraid I am quite dumb when it comes to this. I see you have a link in the description above, do I only need to change the quantity and add my address to order these? Thanks for your help.
Very nice work! Where are you buying the laptop batteries?
Nice project. Couple of things bothered me though.
The board says 12V 3S but you use it as 16V 4S. What gives?
What was the minimum voltage of the cells you used? If cell voltage goes low enough, it can become unstable. Thus one capacity test tells you only that, the next cycle can be a lot lower if the cell is not okay.
Did you measure the internal resistance of the cells or check the temperatures when cyckling? If the resistance is too high, cell can become dangerous because of overheating.
I initially planned for a 3s but decided to on for a 4s.
I only use cell above 4.00 when was tested and charge and stored for a month.
I discard cell which gets hot, usually it's the Sanyo's.
may i ask for Gerber files for this Modular 12v S4 18Ah battery? Please 🙏
Hey there, could you give me the stencil or the file for the thing that you made so I can order it that way
what is ur thought process for 3s vs 4s when ur trying to do 12v? 3s is only 12v when each cell is above 4v which is not a lot of capacity, but 4s is 16v when each cell is charged only to 4v, which is a lot of capacity but how many 12v devices can use 16v?
Great Project, Thinking of building my own! Thanks!!
Can I order the PC boards from JLCPCB?
For higher Amp I could solder some bigger wire as bus.
Yes, you should solder high gauge wires for high amps usage.
I use it only for outdoor lights.
Email me for the Gerber file of the PCB.
Oh wow 👍
Thanks
@@MakerMan pengerjaannya sangat teliti dan hasilnya rapi
Terus berkarya sobat 😊
English please?
Ciao,complimenti,volevo sapere dove acquisti i moduli in plastica porta batterie,se puoi mettere il link,grazie e avanti con nuovi progetti,saluti da Italia.
Could I buy some of these
Gerber files please, we're a community energy coop project looking to create some residential batteries
Sure email me please
good day. where can i download pack builder apps?
good morning
good work
do you have the gerber file please
thank you
Email me.
@@MakerMan good morning
I sent you an email but got no response.
How can I buy these boards
Gerber file?
Link plc buy please?
Hola como esta muy bueno proyecto se puede modificar para un car audio de 1500amp 14.4v
English please
sí, solo use una configuración 3s o use un convertidor reductor.
What glass fuse did you use?
1amp
@@MakerMan hello do you have a purchase link ? thanks
Just search in AliExpress for 1 amp Glass fuse
Bro you can't just throw batteries in a garbage bin
Why would you
may i ask for Gerber files for this Modular 12v S4 18Ah battery? Please 🙏