With li ion batteries model 18650, three important things are considered: 1) model 18650, 2) voltage 3.7V, 3) capacity (battery capacity is expressed in mAh)
First of all you should not solder the battery. Second you should check the capacity of the battery to make sure the cell is equivalent to each other. Anyway its nice videos
With li ion batteries model 18650, three important things are considered: 1) model 18650, 2) voltage 3.7V, 3) capacity (battery capacity is expressed in mAh)
Nice, but every thing with out calculations, battery charger for cell require 12.6 v for 100% charge, not calculated cell MAh batter used same mah, not included safety circuits spatially over heating, must b included volt and amp meter. But good 👍
You can use a 14/15v charger Even an 19.2v charger such as laptop chargers The only condition is the amperage is not big enough to rise the voltage on the poles You have to measure under 12.6v other than that Bms willl block charging, thinking it's full To mention that some bms measure the voltage before activation of MOSFETs, those bms require 13v to charge 3s
Excelente proyecto y estupendo resultado obtenido de la fabricacion, de banco de energía de 220 V con una batería vieja para computadora portátil, respetos y saludos desde Venezuela.💯💯💯💯👍👍👍👍👍🤘🤘🤘🤘🙏🙏💯💯💯💯
420wh of capacity in the battery If the batteries are 2600mAh on average So in each cell ( 2.6Ah×3.7 =10wh ) The battery contain 42 cells so 42×10wh = 420wh
First of all no safety like the batteries are soldered together which is highly dangerous and then there is not coverages to the batter he just used normal flammable plastics and then he uses a square wave inverter which is not suitable for smart devices like phone chargers and etc. so please do not repeat this project guys it’s really not safe and he makes money of out this useless video
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
With li ion batteries model 18650, three important things are considered:
1) model 18650,
2) voltage 3.7V,
3) capacity (battery capacity is expressed in mAh)
with this pack wh is more correct because the pack that he made has 3 cells in series so it shows the actual capacity
using recycled cells like that without regard to their capacities is a sure way to start an electric fire.
First of all you should not solder the battery. Second you should check the capacity of the battery to make sure the cell is equivalent to each other. Anyway its nice videos
With li ion batteries model 18650, three important things are considered:
1) model 18650,
2) voltage 3.7V,
3) capacity (battery capacity is expressed in mAh)
He did measure everything
Soldering is not 🚫
i like this . looks neat and can be commercially sold when done correctly.
This is Nice ❤
10:15 - 10:29 aa gya swad...!😂😂
Half Brick made by nokia..
🤣
I like your editing
Nice, but every thing with out calculations, battery charger for cell require 12.6 v for 100% charge, not calculated cell MAh batter used same mah, not included safety circuits spatially over heating, must b included volt and amp meter. But good 👍
You can use a 14/15v charger
Even an 19.2v charger such as laptop chargers
The only condition is the amperage is not big enough to rise the voltage on the poles
You have to measure under 12.6v other than that
Bms willl block charging, thinking it's full
To mention that some bms measure the voltage before activation of MOSFETs, those bms require 13v to charge 3s
Excelente proyecto y estupendo resultado obtenido de la fabricacion, de banco de energía de 220 V con una batería vieja para computadora portátil, respetos y saludos desde Venezuela.💯💯💯💯👍👍👍👍👍🤘🤘🤘🤘🙏🙏💯💯💯💯
First.... love from India
Thank you
What is the sizes of your case ?bro
What circuit does it use? series or parallel
I wish I had known about this channel before
Yes but some things are dangerously wrong
Amazing 🔥
Very nice👍👍
Bro ye backup kitna dega ????
Super awesome 👏 👍
To make your work easy the easiest thing is buy original power bank
It's all fun and games until the battery over heat and blowhp
That's why a BMS is used
Tutorial DIY cas dengan menggunakan solar penal bro tolong
What are the things we need? can you write it down?
You are awesome 🤩🤩
Caan you build one for me I want to buy and try it
Bhai please make a petrol engine for fridge compressor
what is the price ?
On voit que le courant est faible
C'est juste pour le dépannage
👏
Kya ham 2 alag alag mah ki lithium ion battery ko parallel me jod ke charge kar sakte hai 🤔🤔🕵️🕵️🕵️🕵️
Como recarga las baterias iternas? como sabe que nivel de energia le queda? no explica
Nice Amazing🔥🔥
Nice wish that good to make things that take
noting to say,,,,always good...amazing...💓💓💓💓💓
Grinds one nail, battery drops to 75%
You only just made a lithium ion battery pack🤣🤣
Super 👍👍👍
Muito bom 👏
where's the box from?
Did you make it yourself?
50w backup?
420wh of capacity in the battery
If the batteries are 2600mAh on average
So in each cell ( 2.6Ah×3.7 =10wh )
The battery contain 42 cells so
42×10wh = 420wh
Bro did u test the capacity of each cell
box size?
Where did you buy that box?
Excellent, thanks.
Agar ksi na ya lana ho to la Sakta ha
Backup time?
Love from nepal
My dear ,friend i am using your video
at least put battery indicator.. how will u know ur battery is full..?
6:16 Parkside!
You could have give me one of the old battery for my old laptop. Now my laptop is useless
👌👌👌👌
Verii goot+++++
Succsessfuly to make a 220v Power Bank
OMG Don't use solder on 18650 batteries it will nearly destroy them Use SPOT WELDING.
I agree.
На видео инвертор такой не может быть на 600 Вт./в пике 1200.. обман зрителей ☝️😇
So super
Soldering is not a good idea for li-ion battery's
see Mr CarlsonLab video first..
Battery how to charge???🤔🤔🤔
I love it
PLezz shar witj degram
What are the pvc box dimensions?
No idea.. nothing is given
Hi bro
hi
Hi
@@nda thank you bro
Your project is so amazing 😍🤩😜
Bateria de computador ?
Sim, Notebook
телевизор подключи
Да
good idie 😋
1200w inverter . But inside😂😂😂😂😂 250w 😂😂😂😂😂😂😁
Inverter 1200w ka ha mohammad ali
😄😄😄😄
@@antiquecreativity 1200w is marked outside inverter box - but under PCB board capacity 250-280w 😂😂😂😂
GOOD JOB MAN!
bomb has been planted
Nice
thanks
Sell it to me but I am from Nigeria
Good good good
Thank bro
Nice .
First of all no safety like the batteries are soldered together which is highly dangerous and then there is not coverages to the batter he just used normal flammable plastics and then he uses a square wave inverter which is not suitable for smart devices like phone chargers and etc. so please do not repeat this project guys it’s really not safe and he makes money of out this useless video
Vreau și eu una
Lô
hello bro
Ye bata ta kuch hai nai bas bana deta he 🙄
Hadir nyimak..
Hi
:) hmm nice
Thank you!
Chào pác!
Wow
Ajingh
Ngon...
bad work、
niceee
Wedscc
Vreau și sunt suna
Nice
Hi