2017 Toyota Tacoma Carven Exhaust Full Cat-Back System
HTML-код
- Опубликовано: 6 сен 2024
- Our good friend Donny is back but this time he brought his "lifted" 2017 Toyota Tacoma for a full cat-back exhaust system install from Carven Exhaust.
Follow Donny and his journey on both of his Toyota builds on IG (@BOTOBILT_808)
/ botobilt_808
Follow my IG (@SHERMZ808)
/ shermz808
Want that growl for your Toyota Tacoma or any vehicle, check out:
www.carvenexha...
/ carvenexhaust
______
INSTAGRAM:
Scenefifty
/ scenefifty
#scenefifty #toyota #tacoma #botobilt808
Great Video! and install!
Thank you! I’m glad you approve lol!
This is probably the best sounding cat back exhaust I’ve heard on a Tacoma so far
MBRP turndown is louder
Hard to say. Video audio wouldn’t do justice. Either in-person or a decibel reader side by side comparison would make it plausible.
@@keepitchillpeople1947mbrp sounds like ricer trash
Carven uses 400 series stainless steel, that means it is magnetic and will rust. I see many companies pushing polished stainless steel but that does not improve the quality of the 400 series stainless steel. 300 series stainless steel is what you are looking for because 300 series stainless steel is non magnetic and resists rust and corrosion.
Borla and Corsa both use T304 stainless steel. If you really want an exhaust system that was put through a full R&D program then you want a Borla, yes Borla is more expansive because they do the R&D and they only use T304 stainless steel through out the entire exhaust system. That is why Borla warranties their exhaust systems for 1,000,000 million miles or 50 years, that means you could drive 20,000 miles a year for 50 years to reach 1,000,000 miles. That is how much Borla believes in the quality of their product.
I see Craven warranties their exhaust for 100 years with no mileage mentioned, but notice in their warranty there is nothing mentioned about materials so if your craven exhaust system rusts out in 3 years that is not covered under warranty. That 100 years sounds impressive until you read it and find out in really only covers their workmanship such as broken/cracked welds, broken flex pipes, broken hangers, pinholes, or mis-manufactured components. The reason Craven only covers workmanship and not materials is because they know 400 series stainless steel rusts.
BORLA PERFORMANCE INDUSTRIES, INC. warrants its products to the original purchaser of record and for the original vehicle on which the product was installed against defects in materials and workmanship for one million miles.
The Craven cat back exhaust costs $549.99 The Borla cat back exhaust costs $828.99 so for just another $279 dollars you can upgrade to a Borla cat back exhaust system that is a full T304 stainless steel exhaust and have a superior exhaust system.
i did alot of research on exhaust for my toyo 2017 and i love this one, i bought it, hope it lives up to my exceptions!!
I’m sure you’ll love this exhaust for your Taco 👍🏽
Any check engine light? What model and year you got?
@@andrescollier2124 No check engine light, 2017 Tacoma Trd Sport
@@mauiwaue4757 how you liking it? I am deciding between this one and the flowmaster 40 series
Also Joe Joy : "Slippah" lol
Just installed mine and of course the one I got is missing that lip that is on the end of the last piece that the exhaust tip goes onto...sucks. Other than that, the exhaust is amazing. A lot louder than I thought it would be lol
Nice! I wonder why yours was missing that lip? I hope things get worked with that issue. I'm glad you enjoy the exhaust!
@@SceneFifty I actually put my OEM back on 😔
@@SceneFifty they told me because that’s how it comes now…
I just got my 2020 trd sport on monday, was looking at a exhaust. At first I was looking at TRD now i'm thinking this lol
Niiiiiiice! Yes you should look into the Carven exhaust brand. It has a more aggressive growl than the TRD one.
@@SceneFifty Yeah I only know of them because they make it for the 15+ wrx. Thanks for the video bro, I just ordered through my connect, with discount and tax was 466 shipped.
Vanna Touch dang, I didn’t get notice of this reply until now...sorry bro. But yes, they do have it for the 15+ WRX. I was told to put it on my 2018 STI too lol! But yeh, you’re welcome! Sweet that you got yours ordered 👍🏽
@@SceneFifty YEah bro still waiting for it to come in lol
Vanna Touch nice! Let us know how it goes 👍🏽
Sounds 🔥🔥🔥🔥! Definitely need it. Fyi your sway bar needs to be flipped, driver side goes on passenger side when procomp lift is installed
That's good to know, however it was professionally installed, thanks tho 🤙
@@donnygonzaga9203 players and professionals make mistakes, no big deal, take it back and have them flipped it. Reason I know, I own 2019 taco and they did same. Took it back the the pros and done deal.
@@chagohernandez9461 tnx for the info 👍🤙
Omg this sounds amazing I just got a 2021 sr5 and I was looking at some exhaust and I think this takes the my choice
It's a really subtle but awesome sounding exhaust IMO. Get it, you won't be disappointed.
Get it 👍🤙
That thing is mean! 😍 love it man! Awesome sounds
Hahaha I know right! Glad you love it bro 👍🏽
I like the look of your lifted truck.If I missed you saying how many inches tall is the lift? What size are the tires?
Sup bro! The lift on the truck is at 6 inches and the tire size is 33x12.50R17LT Hope that helps!
@@SceneFifty Yeah it does, thanx bro. I am looking at a 6" lift myself with bf goodrich 37x12.5-17 tires.I just love the ride on a lifted truck!
@@mr.hidden5790 Go for it! I hope everything works out with your build.
Awesome!!!!
Thanks for the vid guys. Sounds great, just ordered for my new Tacoma.
Git it, I love mines 🤙
You’re welcome! Hope this video helped you a bit lol! Thanks for watching!
Banks made exhaust back then for the 4.0 sounded ill
Nice video! We love Tacoma’s on Hawaii!
Mahalos 🤙🏽. Lol right...Hawaii, home of the Tacomas lol!
My brother in law just came back from Hawaii and he did say there are a bunch Tacoma’s there and I would love to go there one day. Looking forward to it!
Lifted brah! Brand new 1993 toyota tacoma!
Hahahaha rajah!!!
Cherry brah! 😂
I have a 2020 tacoma SR5 access cab, anyone know if it’s supported as well . I’d love to change mine 😓😓
Not sure bro, u can chek on their web site to see if they hav an application for the access cab 👍🤙
Haha I love Joe Koy
I like it, Christmas is coming!
hahaha it sure is!
Beautiful truck
Tnx bro 🤙
Kalihi style Boi 👏🤙🏼just installed same one on my 2018 TRD OR
hahaha rajah! nice bro!
Cheeee 🤙
Nice looking exhaust. I just got my 2020 Tacoma TRD OR at the beginning of the year and I am looking at different exhaust systems thanks for the share. Nice looking truck by the way.
Tnx bruddah 🤙
Trd exhausted is already made by magnaflow
what's the name of the one you bought
www.carvenexhaust.com/2016-2020-toyota-tacoma-cat-back-kit.html
If the 2016 is safer from cat theft, how about the 2017?
Idk bro, jus gotta chancem!
If u catch that thief break his fkn hands 👍
Will I have to cut the pipes if I have a 5 foot bed ?
Hi! The truck in this video has a 5ft. bed so no cutting required 👍🏽
Thinking of getting this!!!
Get it 👍
C3NT3NO you should get it!
Scene Fifty is it worth it? Looks pricy
C3NT3NO price is not to bad for this model truck if you have an extra five hunnid to spend. Shipping depends where you’re located. Was kinda expensive to get it shipped to Hawaii. I’d say it’s worth it though. Sounds nice and decent power feel due to less exhaust restriction.
Great video!
Thank you! Thanks for watching!
That IS nice!
Any problems with check engine light?
Andres Collier no problems yet and no cel yet
No engine light 🤙
Yoo how many inches is your lift? And tire size? Like 33 or 35??
Sup bro! The lift on the truck is at 6 inches and the tire size is 33x12.50R17LT Hope that helps!
@@SceneFifty that helps me greatly! Thank you!
@@josiahirondreads3211 you're welcome!
How much ? Windows up is it still loud ?
Only wen u floor it but other than that it's fine 🤙
Oh n I had to pay lil extra for shipping to HI, total close to 700
I wanna see one of these tacoma exhaust videos where the bolts are rusted too shit....then see how easy it is....
Considering it but does it work on the access cab? All I’m seeing are double cab and double cab long bed.
I believe it may work on your access cab Tacoma. You might want to find out the length of your bed. I know the Tacoma in this video has a length bed same as your access cab, so it may work.
@@SceneFifty I was debating it too tbh. Access cab and double cab short beds have the same wheelbase length.
@@OggaDugga hmmm...so i believe it may work for your truck then. i think it all matters on the length of the bed that you have.
@@SceneFifty access cabs only with the long bed. But short bed trucks sacrifice the bed space for the cab space and access cabs vice versa. I think the short bed exhaust should work the access cab since the wheelbase is the same. If it was a double cab long bed then that’s a dif story.
@@OggaDugga you hit good points sir. I guess the only true way to find out is to contact Carven Exhaust...juuuuuuust to be sure
I have the same truck as you how much was yours
About 36000+
You forgot to put underscore in your buddy’s Instagram
Oh damn I did forget. Thanks for pointing that out bro!
I recently added dat underscore 🥴🤙
Howzit Braddah's does the carven exhaust have drone in the cab. I'm leaning towards it. How much did the charge for shipping. Mahalo for the video🤙🏼🤙🏼🤙🏼🤙🏼
Howzit my Braddah! Drone is very minimal in the cab. Not much where it’s gonna drive you nuts. You should go for it bro! I believe Donny spent around $200 to get it shipped here to Hawaii. You’re welcome and Mahalos for watching!!! 🤙🏽🤙🏽🤙🏽
No drone for me n shipping was about $200+
How much did you pay for the shipping here in hawaii?
the shipping to hawaii cost about $200 at time of purchase
What lift and wheel set up you guys running?
Pro comp 6 in lift with 33x12.50x17 RBP m/t wheels are VRock 17x9.5
I recently updated my suspension to Rough Country 8 stage adjustable coil overs 🤙
@@donnygonzaga9203 for 6 inch lift do you have to cut the crossmember or is it a bolt on kit?
@@manassehdriii7825 cross member had to be cut, I believe anything higher than 3 inches u gotta cut 👍
Any difference in mpgs?
ZANDER VAZ with this set up, not too much of a difference.
what the setup on your tacoma, my tacoma is almost done with the warranty so i can lift my taco soon
It's a basic 6inch procomp lift, 17x9.5 rims with 33x12.50 tires, anything else I'll b glad to answer 🤙
@@donnygonzaga9203 what kind of wheels and tires are those?
@@JGreene93 wheels are VRock OffRoad Wheels, tires are Rolling Big Power "RBP"
M/Ts
Do you notice a power loss or gain?
Power gain for sure but not too drastic. Post install, the truck has better torque and seems less restrictive versus stock. Oh yeh, not to mention to sound.
No power loss, a bit more power, better then stock thats for sure tho 🤙
I feel like this might be a dumb question but I just recently got my taco and I really like this exhaust but my taco is the 2.7l version. If i still get this exhaust for the install will there be a drastic difference in sound or will it be pretty much the same??
Im pretty sure its gonna b a sound difference 🤙
The 2.7 sounds better with an exhaust than the v6
I know you posted this 2 years ago but if you are still looking for a cat back exhaust for your 2.7 check out my video of the Borla cat back system on my 2023 Tacoma 2.7 4X4. ruclips.net/video/vvSLCM3bLuo/видео.html
Here is a sound clip of the Borla cat back on my 27 liter Tacoma. ruclips.net/video/Di0omoIo8cc/видео.html
What brand and size are your tires?
"RBP" Rolling Big Power
33x12.50x17
How many inches is it lifted?
6 inches 👍
Boto built....😅🤣😂
any drones?
No drone for me, I can easily tune out noises if I wanted to, dats jus me but I don't think they're any tho
Anybody know the decibels?
Joe Biden's Shotgun I’ve tried to find info on the decibel levels but was not successful. I guess the only way to find out is to obtain a decibel reader lol!
Aye Boss! sounds cherry! You order directly from the site? Local dealers, oahu?
Sup bro, idk if there is anyone down here dat sells dem. I ordered mines straight from Carven. 🤙
Message @rev_hi on IG for the best deal on the carven exhaust.
Im interested. Still have available
@@jmelchor9797 you have to DM @rev_hi on their IG
Does it fit my long bed?
It should. If you purchase a Carven Exhaust system for your truck, they will give you and option on which size bed you have. Long bed is in that option.
What size lift is that?
It’s a 6 inch lift bro
@@SceneFifty Ight thanks looks dope
is that 2.5 or 3" piping?
Oh shit, I don't even know, lol, sorry
@@donnygonzaga9203 its cool man. i just ordered me the system too lol. i called them and they told me the piping is actually 2.75" so its perfect for our trucks.
I hope u enjoy ur exhaust man, I do espesh wen driving in tunnels 😎🤙
Keep us posted on how u lik it or not 👍
@@donnygonzaga9203 : for sure man. i WAS just gonna get the urd cat back since im already running a urd mkii ypipe, but the shipping was just astronomical to hawaii. i bought the carven with the same fedex shipping and it was free lol. from what i heard so far it does sound very good. im sure im gonna be pleased with mine. has that flowmaster sound mixed with a little black widow.
What’s this beat called
I usually save the tags on the music but this one unfortunately I did not.
Scene Fifty Fosho G appreciate it , Stay Up 🙏🏽
Thanks G...you too!
It's nice but it's too pricey
I hope you’ll find the right one for yourself though 👍🏽
Too Raspy
yes, it may be too raspy for some. that's what you would expect from a v6 engine though.