GARMIN FISH FINDER INSTALLATION AND SETUP | HOW TO
HTML-код
- Опубликовано: 2 сен 2023
- In this video I show you step by step instructions on how to install a Garmin uhv 74sv fish finder on a Mako Pro 17 skiff. Thanks for watching! If you find it helpful be sure to like and subscribe and if you have any questions just drop a comment down below.
Amazon Affiliate links:
➜ Garmin ECHOMAP UHD 74sv with GT56UHD-TM Transducer, 7"" Keyed-Assist Touchscreen Chartplotter with U.S. BlueChart G3 and Added High-Def Scanning Sonar: amzn.to/3Ep3gi7
➜ 3M Marine Adhesive Sealant Fast Cure 5200 Permanent Bonding and Sealing for Boats and RVs Above and Below the Waterline Waterproof Repair, White, 1 fl oz Tube: amzn.to/3Pqusn3
➜ Boatlife Life Seal Cartridge, Clear: amzn.to/3PoixWE
➜ Pica Deep Hole Marker, Black: amzn.to/3R8hX0I
➜ Seachoice Plastic Wire Cover, Black Finish, Pack of 2: amzn.to/3Z6iIco
➜ Scotch Extra Strength Painter's Tape, Green, Tape Protects Surfaces and Removes Easily, 1.41 Inches x 60.1 Yards, 1 Roll: amzn.to/3L9IxTg
➜ Makita 18V LXT Lithium-Ion Cordless Driver-Drill, 1/2": amzn.to/3r0qQic
➜ Milwaukee Bit Set With Case (23-Piece): amzn.to/3P5HvsJ
Follow me here:
Instagram: / reel_life_fisherman
Twitter: / reellifefishin
Facebook: / reel-life-fisherman-20...
Filmed and edited by Noctem Productions www.noctemproductions.com/ 
Хобби
I laughed so hard when you said put the rubber o ring on the tip…just the tip!! As usual great video!!!! Very informative!
🤣🤣 thanks ! I appreciate you watching!
As someone associated with the Marine Industry here on the Upper Texas Gulf Coast I got a chuckle about running your wires at the same time. I'm sure you HATE it as much as we do when a DIYer freak'n zip ties wires together every 3 dang feet before pulling them. Anyway great video. I've trusted Garmin for many of my 60 yrs of life. I just bought the UHD2-94SV w/ GT56 Transducer for my Shallow Sport 18 Bahia and seriously unsure where to put my transducer. Again thanks for sharing and as always "Tight Lines and Full Limits To Ya"
Thanx for this. Getting my mps17 next week and installing garmin 94sv uhd2. Perfect timing🤙🏼
Awesome!! You’re going to love it! Thanks for watching and commenting I really appreciate it!
Good tutorial, thanks. Simple comments like “industry standard" are incredibly helpful for weekend hacks like me that don't know anything.. I can F up just about anything, but knowing I'm at least using the right stuff helps a lot. Again , thanks
Just like the trolling motor video. This is exactly what I was looking for and great in depth instruction. Great job!
Great video can’t wait for new videos coming out 💯🎣
Thanks Jonny I appreciate it!
Thank you so much, I have one on order so now I know how
Great Video, Thank you
Awesome glad you enjoyed it! Thanks for watching and taking the time to comment!
Awesome bro! Thank you. Looking forward to the live well fix video. I am thinking about getting this boat in the future but from a hear the live wells suck and for what ever reason they don’t fix it lol.
Thanks I’m glad you liked it! My rear livewell has zero issues! One of the big reasons I went with the 17 over the 15. The front one works about 50% of the time.. I’m debating on trying the vent method or just pulling the trigger and going with a self priming pump.. I have no clue why they don’t address it at the factory! I work as a mechanic at bass pro and they are well aware of the issues.. but it’s a great boat! I have no regrets about buying it.. stay tuned I’ve done a lot of work to this thing. Working on all the videos.. thanks for watching and commenting I appreciate it!
Hey bud quick question.. would you happen to know if drilling the holes for transducer etc. void the Makos stem to stern warranty? On the Hull
Probably a stupid question but would it be different placement on a trihull
Does it connect with the trolling motor?
Can you tie the garmin to your minnkota.
So did you connect the power leads from the head unit to the main positive and negative of the starting battery under the center console ?
Power and ground where you connect?
I connect it to the bus bar power and ground under the helm. It is controlled by the main battery switch. But you could connect it to the battery. Just make sure to turn off the unit and don’t forget. Let me know if you have questions. Thanks for watching
I have not looked inside the console so this helps a lot just land on the dc bus bars thanks for your help trolling motor is next
How does it work while your on place with the transducer placement you chose?
I'm in pretty shallow water most of the time so at higher speeds I loose it . But it has depth shading and contours so I use that to navigate. Besides it's on the back of the boat no matter what.. so if you're going to hit something..you already have ! 🤣
Did the clam shell you used come with the Garmin? Thanks
I like to use one made by sea choice I’ll send you the link to them. Thanks for watching!
Seachoice Plastic Wire Cover, Black Finish, Pack of 2 a.co/d/ifAqhxR
Thank You@@ReelLifeFisherman
why not use cable phishing poles
why the loop in the fariday cage I work with computers and have never done the loop and it does its job
Only reason is that is how they show it in the directions.. I'm sure it works fine either way.. I've seen lots of units installed by others with nothing on them and they seem to work just fine.. thanks for watching and commenting