5:30' use salt will make chlore gas, and it's dangerous if high concentration. You can use lemon juice or vinegar. You should mention safety when using acid sulfuric also.
I've built a few HHO generators, and I see a few issues with his design. If he's intending on producing just hydrogen, then he needs to minimize the amount of negative rods because hydrogen is produced on the positive side and oxygen is produced on the negative side also I noticed that he's not using a spark arrestor or one-way valve. When the Flaming gas backs up into that accumulator tank it's going to explode like a grenade!
You can’t change the amount of hydrogen and oxygen produced by using more rods. They are stoichiometrically related, two liters of hydrogen must produce one liter of oxygen. Giving less surface area to oxygen production will only reduce the reaction rate overall since oxygen will have a bottleneck.
Yo también e realizado experimentos con generadores de hidrógeno y por lo general siempre se produce el doble de oxígeno que de hidrógeno , aparte que te equivocas el diseño si cuenta con un sistema anti retroceso, o también llamado burbujeador , se nota la poca experiencia que tienes en el tema , y yo más que defectos en ese diseño lo que veo es una tremenda inspiración para un muy potente cañón , solo es cuestión de hacer unas pequeñas modificaciones para que soporte una presión mayor de ese modo se obtiene un cañón que nada tiene que envidiarle a un cañón que use pólvora esmas creo que incluso podria superarlo pues la potencia explosiva del hidrógeno es enorme
Honestly, even if it wasn't an AA, cutting open batteries is generally a bad idea. A safer option is to use stainless steel hardware like washers and bolts. It's cheaper, and doesn't corrode as fast.
@@EeveeTheQueen no. There is nothing really dangeorous about carbon zinc batteries, and using stainless steel is a very stupid idea as the positive electrode will fully corrode away in a matter of tens of minutes and turn the water into a toxic brown waste.
Hello, great video and good idea to use the inert carbon core of dry cells, but you have left the welds exposed, remember to isolate all the metals inside the HHO reactor otherwise all the metal anodes will disappear and that is why the electrolyte will get dirty and the use of inert carbon cores will lose all sense, but the assembly is nice.
With real graphite - not much (although it somewhat depends). However, those rods from batteries are not a graphite, but pressed carbon, and tend to disintegrate disappointingly fast into carbon powder during electrolysis.
💯❤️Congratulations, it was very enjoyable. I was also planning to make this device. The idea of this work came to my mind from the alcohol gun. I wanted to make something stronger than the alcohol gun. It works very well for the hydrolysis of baking soda and water solution. Good luck my friend 🎉
A cell like that isn't going to last all that long though as the materials used simply can't withstand the process of breaking the bonds of the water molecules without the water breaking them down in return. The electrodes are all going to breakdown and even the copper wire in contact with the liquid will breakdown into the solution in a short about of time. It's the reason why so many use Stainless Steel, Nickle, or Platinum, or some other material that have a high anticorrosion factor.
Great video! The concept of turning water into hydrogen is fascinating. What are the advantages of this hydrogen generator compared to traditional methods? Are there any safety risks to consider when building and using it? I’d love to learn more about the possible applications of the hydrogen produced. Thanks for sharing!"
I do first time see a face channel whrere these types of vidoes are showing real face - there are a lot of channels where making fake such devices and creator are hiding itself! So this Skill Make channel are legit and awesome!!
سلام مهندس جان❤ الان تو کانال اسکیل وید کامنت گذاشتی راجب شرکت ادسنس و غرامت، شما کدوم شرکت کار میکنی و چقدر غرامت گذاشتی؟ چطوری؟ لطفا کامل پاسخ بده چون منم مثل خودت خیلی زحمت کشیدم برای کانالم دلم نمیخواد در خطر باشه. الان چندین ساله که کانال دارم و خیلی براش زحمت کشیدم. لطف بزرگی میکنی راهنماییم کنی
@@SparkMind1 درود می تونی بجای این شرکتها یه حساب پی پال به صورت آنلاین ایجاد کنی و درآمد یوتیوبت رو به اونجا انتقال بدی، بعدش می تونی این پول رو به تون کیپرت انتقال بدی و رمز ارز بخری، اگه هم نخواستی بخری می تونی به راحتی با صرافی آنلاین با یه کارمزد ناچیز (مثلا 500 تا یه تومنی برا چند میلیون) ، تبدیل به تومنش کنی
Nice build! Carbon breaks down quite rapidly in these you know electrolysis generators if you will I've used flat carbon plates a few times and they break down rather quickly
How long will the generator work until them battery sticks get bad? Also when the battery things be completely dead (no electricity) Is there a way to charge them back into being conductive again? This is the first time I seen your videos. Im so glade youtube recommend me to you. My mind was blown from the creation of this unit. I subscribed right away! Amazing work and cant wait to see more.
I had to give up on all these DIY science experiments. I wasn't cut out for stuff like this. I remember my first attempt at something that looked similar to that but when I applied just the right amount of voltage it ripped the fabric of reality creating a wormhole that led to a weird world of people who lived there whole lives in reverse like literally everything functioned in reverse and for someone like me who never was very good at walking in reverse I got a lot of mean looks and weird sounds. I can only imagine it was something derogatory about my mother. They were very 4th grader-ish in maturity if you know what I mean. So after all that failure I wasn't fully ready to give up since my parents always told me to never give up if you fail the first time so I gave it another try and well this one didn't end up in another galaxy but on the FBI watch list. See ever since ole Einstein and Oppenheimer came up with the ole split the atom doohickey they assumed that plutonium was the best and most powerful thing to use but I guess somehow when I was making changes to my DIY gadget one of my cats shed claws got in it and once again I added the perfect amount of voltage and the reaction from a newly discovered element found only in the claws of cats was split in such a precise and obtuse angle that I know had I not plugged the plug when I did it would have completely vaporized the vast majority of the world. I was visited by "officials" if you know what I mean. Guess I popped up on their "radar" from the amount of fine tuned high grade particles being emited by my DIY science project. Didn't even know they could do that but yes yes they can and they get really mean and threatening so I was persuaded to disassemble it and never tell anyone about the secret element found only in the claws of cats. I know none of you will tell so it's cool. So yeah I gave up on DIY science experiments and stuff. Now I'm in the porn industry and finally found my true calling in life. It's been straight up ever since. If you know what I mean... "snicker in the back ground"... The lesson to learn is never work hard to only end up in reverse but don't give up until you're the bomb then don't let anyone take it away from you because if you never give up you'll hit the honey hole and the erection is history.. I mean the rest is history.. stupid autocorrect ...
That thing is for single show only and will not be durable. Metal parts are exposed to solution and will corrode like hell, especially on anode and especially using sulfuric acid. Carbon rods from batteries are not especially great as electrodes either, but metal parts will fail much faster than them.
This man is fucking genius , hydrogen powered canon .if only Blackbeard could have seen that his ship could have blown the 3 royal navy ships who followed him everywhere.
@@skillmake⚠️ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠️ Quran
hence the ability to drive a car on water ! Use the explosion to produce a motion ! IE up and down and tranlare it via gears into circular motion! ... Now we havea n electric car which drives o water ( or Sulpuric acid ! ) and the electric is not driving the car its the hyrogen generated ! hence to make a engine casing for this to make a vehicle ! IN fact in SPACE ! this type if action would be a good long term Feul to drive a ship !
5:30' use salt will make chlore gas, and it's dangerous if high concentration. You can use lemon juice or vinegar. You should mention safety when using acid sulfuric also.
Or we can also use Baking Soda
No it doesn't.
Indeed. Aswer this comment if u want me to explain how to not mess up your entire body with the sulfuric acid
You can?
If you run it on high temp, fe: 60C° it generates a little chlore gas. Do it outside őr do not use salt
Uou know in this video you can see his pure passion for his craft and the focus and effort its nice to see
I've built a few HHO generators, and I see a few issues with his design. If he's intending on producing just hydrogen, then he needs to minimize the amount of negative rods because hydrogen is produced on the positive side and oxygen is produced on the negative side also I noticed that he's not using a spark arrestor or one-way valve. When the Flaming gas backs up into that accumulator tank it's going to explode like a grenade!
Isn't that what that vertical tube of water is for?
Umm.. hydrogen is produced on the negative electrode and oxygen on the positive not vice versa?
You can’t change the amount of hydrogen and oxygen produced by using more rods. They are stoichiometrically related, two liters of hydrogen must produce one liter of oxygen. Giving less surface area to oxygen production will only reduce the reaction rate overall since oxygen will have a bottleneck.
Yo también e realizado experimentos con generadores de hidrógeno y por lo general siempre se produce el doble de oxígeno que de hidrógeno , aparte que te equivocas el diseño si cuenta con un sistema anti retroceso, o también llamado burbujeador , se nota la poca experiencia que tienes en el tema , y yo más que defectos en ese diseño lo que veo es una tremenda inspiración para un muy potente cañón , solo es cuestión de hacer unas pequeñas modificaciones para que soporte una presión mayor de ese modo se obtiene un cañón que nada tiene que envidiarle a un cañón que use pólvora esmas creo que incluso podria superarlo pues la potencia explosiva del hidrógeno es enorme
Exactly!! Very dangerous because of back wave of detonation into a reservoir!
For those reading comments, stainless steel works just fine dont go opening batteries 😭
Should probably mention which AA battery, because not all of them have that core. People gonna cut into alkaline batteries and make a mistake
And alkalines have mercury right?
it is a graphite/salt batteries
Honestly, even if it wasn't an AA, cutting open batteries is generally a bad idea. A safer option is to use stainless steel hardware like washers and bolts. It's cheaper, and doesn't corrode as fast.
@@EeveeTheQueen no. There is nothing really dangeorous about carbon zinc batteries, and using stainless steel is a very stupid idea as the positive electrode will fully corrode away in a matter of tens of minutes and turn the water into a toxic brown waste.
@cuf_ how so, explain lolllll, why does the anode specifically corrode. And yes opening batteries can expose you to toxic materials 🤷♂️
There are always hydrogen producing videos on RUclips. There are no hydrogen fuel cell creation videos. I wish you could make a video like this.
You need platinum for fuel cells, very expensive :c
@@aquafox8732 You may be right, platinum being expensive does not prevent video creation.
Actually they're all over RUclips
If you find any video that replaces platinum in hydrogen batteries, please let me know.
Hello, great video and good idea to use the inert carbon core of dry cells, but you have left the welds exposed, remember to isolate all the metals inside the HHO reactor otherwise all the metal anodes will disappear and that is why the electrolyte will get dirty and the use of inert carbon cores will lose all sense, but the assembly is nice.
5:20 The movie was great, well done man
Beautiful work 👏🏻
May I know how many amps the current reading is during this electrolysis process
Dont suppose those rings you used were 3d printed were they ?
If so anychance in getting an stl for them ?
Does sulphuric acid not react with the graphite rods??
With real graphite - not much (although it somewhat depends). However, those rods from batteries are not a graphite, but pressed carbon, and tend to disintegrate disappointingly fast into carbon powder during electrolysis.
Using a battery rod, how long can the water last before it changes color?
💯❤️Congratulations, it was very enjoyable. I was also planning to make this device. The idea of this work came to my mind from the alcohol gun. I wanted to make something stronger than the alcohol gun. It works very well for the hydrolysis of baking soda and water solution. Good luck my friend 🎉
بهترین واقعاً کارت درسته هموطن ❤❤
It was wonderful, man❤
❤بسیار عالی .
So nice . So good . Very interesting video
ممنون 🤗
Nice work
Под конец стало интересно! Подписка и лайк
Un diseño tremendamente inspirador gracias por compartir la idea ❤ saludos desde Colombia.
Why use the coil electrodes, if anyway the metal wires is deeped in electrolyte?
مهندس چه عجب ویدئو گزاشتی
Great video! What editing program do you use?
thanks for sharing this, i have an idea to make something,
How did the syringe needle stop the fire from blowing up the bubbler
how long will this system last before the electrodes dissolve and /or the reactivity goes down, curious about replacement of these parts
A cell like that isn't going to last all that long though as the materials used simply can't withstand the process of breaking the bonds of the water molecules without the water breaking them down in return. The electrodes are all going to breakdown and even the copper wire in contact with the liquid will breakdown into the solution in a short about of time. It's the reason why so many use Stainless Steel, Nickle, or Platinum, or some other material that have a high anticorrosion factor.
BOOM !!!!!!!!!!!! ......... thanks for the video dude
Beautiful work.
1st i thought.. Tony's Heart❤
Great video! The concept of turning water into hydrogen is fascinating. What are the advantages of this hydrogen generator compared to traditional methods? Are there any safety risks to consider when building and using it? I’d love to learn more about the possible applications of the hydrogen produced. Thanks for sharing!"
I think better method is using acid and zinc or any other metal which dissolves in acids.
Your category name please❤
I do first time see a face channel whrere these types of vidoes are showing real face - there are a lot of channels where making fake such devices and creator are hiding itself! So this Skill Make channel are legit and awesome!!
That was awesome! 👍🏻🇺🇸
How long of a service life do you expect for these graphite rods and would you sell a kit of parts?
سلام مهندس جان❤
الان تو کانال اسکیل وید کامنت گذاشتی راجب شرکت ادسنس و غرامت، شما کدوم شرکت کار میکنی و چقدر غرامت گذاشتی؟ چطوری؟
لطفا کامل پاسخ بده چون منم مثل خودت خیلی زحمت کشیدم برای کانالم دلم نمیخواد در خطر باشه.
الان چندین ساله که کانال دارم و خیلی براش زحمت کشیدم.
لطف بزرگی میکنی راهنماییم کنی
داداش جواب منم بده فقط دو دقیقه از وقتتو میگیره ولی کمک بزرگی به منه
ممنون❤
سلام من فعلا با اندروپی کار میکنم ولی احتمالا دو سه ماه دیگه قراردادم تموم شد تغییر بدم
@@skillmake جواب سوالم رو کامل ندادی ولی بازم ممنون بابت پاسخگویی🙏
خیلی کاراتو دنبال میکنم عالی هستی، امیدوارم بیشتر بدرخشی 🌹
@@SparkMind1
درود
می تونی بجای این شرکتها
یه حساب پی پال به صورت آنلاین ایجاد کنی و درآمد یوتیوبت رو به اونجا انتقال بدی، بعدش می تونی این پول رو به تون کیپرت انتقال بدی و رمز ارز بخری، اگه هم نخواستی بخری می تونی به راحتی با صرافی آنلاین با یه کارمزد ناچیز (مثلا 500 تا یه تومنی برا چند میلیون) ، تبدیل به تومنش کنی
1:53 Clown Core
W reference
What is the type of the drain cleaner
Nice build! Carbon breaks down quite rapidly in these you know electrolysis generators if you will I've used flat carbon plates a few times and they break down rather quickly
this is parts maked by 3d printer?
یه همچین ویدئو با کیفیتی قطعا زمان و تلاش زیادی میطلبه ... واقعا دست مریزاد
نمی خواستم کامنت فارسی بزارم ، ولی نشد، ببخش😊😂
Keren banget karya anda
Why didn't the flame travel into the pipe as HOO is being created? Thanks
pressure was high enough at this point... which can change at any moment... this device in the video is in fact a bomb with a rather weird fuse
what are the dimensions of the blue circle
I'd be interested to see conductivity of sodium bicarbonate compared to these.
You should keep the graphite, it can be used for other projects.
Smart. Neve thought about using acid
Better than coil gun
Perfect and factory production.
👍 👍
6:27 6:29 6:37 watermelon!
Using butane or propane is cheaper. 90% isopropyl alcohol (disinfectant for first aid) and kerosene can work too.
How long will the generator work until them battery sticks get bad? Also when the battery things be completely dead (no electricity) Is there a way to charge them back into being conductive again?
This is the first time I seen your videos. Im so glade youtube recommend me to you. My mind was blown from the creation of this unit. I subscribed right away! Amazing work and cant wait to see more.
I don’t think the graphite rods would loose conductivity, but byproducts of the sulfuric acid could collect on the rod
Depends on the electrolyte in the water ...
Amazing ❤️
Find a cone-shaped can so that the explosive gas will be more concentrated and more powerful?
Nice job, excelent project HHO. Congratulation! 🤜🤛 SUBSCRIBED! 👍 Hug and sucess.
great design
why it throws bullet out? there must be compression of volume instead of expansion
А вы знали, оказывается продаются электроды для сварочного аппарата из графита☝️
Where r the plans ,i want to make one
سلام استاد خسته نباشید بسیار عالی عالی بود
Or: how to blow your hands away when the gas presure reduces, and the gas flow is slower than the burn speed.
That sir.. Is a timed grenade
Energi listrik yang di butuhkan berapa volt ampere
Please make a video on making high powered air gun
Странно что в фалаут так и не сделали самодельную водородную пушку😅
I have a simple 2 ss plate jar n baking soda water hho setup in my car... cleaner fuller burn but o2 says clean = more gas rich per ecu...
Maaaaahhhn....you have a tungsten balls to press those button...
Can I use it on my car to save fuel
No
Bruh he built a tank Boom 💥
Go out into the field and shoot at a variety of things, you will be successful.
At first glance I thought those was Panasonic brand batteries and then I read it. 😂
I had to give up on all these DIY science experiments. I wasn't cut out for stuff like this. I remember my first attempt at something that looked similar to that but when I applied just the right amount of voltage it ripped the fabric of reality creating a wormhole that led to a weird world of people who lived there whole lives in reverse like literally everything functioned in reverse and for someone like me who never was very good at walking in reverse I got a lot of mean looks and weird sounds. I can only imagine it was something derogatory about my mother. They were very 4th grader-ish in maturity if you know what I mean. So after all that failure I wasn't fully ready to give up since my parents always told me to never give up if you fail the first time so I gave it another try and well this one didn't end up in another galaxy but on the FBI watch list. See ever since ole Einstein and Oppenheimer came up with the ole split the atom doohickey they assumed that plutonium was the best and most powerful thing to use but I guess somehow when I was making changes to my DIY gadget one of my cats shed claws got in it and once again I added the perfect amount of voltage and the reaction from a newly discovered element found only in the claws of cats was split in such a precise and obtuse angle that I know had I not plugged the plug when I did it would have completely vaporized the vast majority of the world. I was visited by "officials" if you know what I mean. Guess I popped up on their "radar" from the amount of fine tuned high grade particles being emited by my DIY science project. Didn't even know they could do that but yes yes they can and they get really mean and threatening so I was persuaded to disassemble it and never tell anyone about the secret element found only in the claws of cats. I know none of you will tell so it's cool. So yeah I gave up on DIY science experiments and stuff. Now I'm in the porn industry and finally found my true calling in life. It's been straight up ever since. If you know what I mean... "snicker in the back ground"...
The lesson to learn is never work hard to only end up in reverse but don't give up until you're the bomb then don't let anyone take it away from you because if you never give up you'll hit the honey hole and the erection is history.. I mean the rest is history.. stupid autocorrect ...
Didn't anticipate that explosion was gonna be planned and have a use.
Nice 🎉
plz do video with solar panel, hydrogen fuel cell, hydrogen container, hydrogen fuel cell, then light. (storing solar power in hydrogen battery.
how much hight voltage. ????????
should make one for a potato cannon, no one has done it
Так можна разоритися - витаскувати графітові стрижні з батарейок)) Їх же значно дешевше просто замовити. Чи вони всі повністю розряджені?
Just how to make a voltage step up circuit
رائع ارجو الترجمة
Я один ждал, когда у него Верхняя колба Бахнет в дребезги, это Опасно...
О, известнейшие батарейки пенонсинг, фуджисоник и панасканик...😂
That thing is for single show only and will not be durable. Metal parts are exposed to solution and will corrode like hell, especially on anode and especially using sulfuric acid. Carbon rods from batteries are not especially great as electrodes either, but metal parts will fail much faster than them.
He is using new battery’s… ?!
Can bedien with used?
❤ FRUMOS
I would think that making a dry cell unit would be easier than this.
А что если разлогать воду это грех??
He can built an incredible machine but can’t balance a watermelon😂😂😂
There is something else in the video and something else on the thumbnail. This is misleading
This man is fucking genius , hydrogen powered canon
.if only Blackbeard could have seen that his ship could have blown the 3 royal navy ships who followed him everywhere.
Офигеть! 😮
Also making copper sulphate solution.
Here, this batteries are called "Panasonic"
ما ک دسترسی به سولفوریک اسید نداریم چیکار کنیم
پودر لوله باز کن استفاده کن جوابه
@@skillmake⚠️ God has said in the Quran:
🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )
🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 )
🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 )
🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 )
🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 )
⚠️ Quran
You can use baking soda
@@2N2-DIY tnx
Naoh
Thanks bhai
hence the ability to drive a car on water ! Use the explosion to produce a motion ! IE up and down and tranlare it via gears into circular motion! ... Now we havea n electric car which drives o water ( or Sulpuric acid ! ) and the electric is not driving the car its the hyrogen generated !
hence to make a engine casing for this to make a vehicle !
IN fact in SPACE ! this type if action would be a good long term Feul to drive a ship !
Доктор Дью! Ау)
همینو روز در میون بساز پست کن حاجی خوب ویو داره ک
Conectar con nikel en el interior
The gas is H2 O2 mix which is highly explosive. If you want H2 only then you should isolate the Cathode since it produces H2
Amazing good
Thank you so much 😀
That’s a bomb waiting to go off