I bought this holster for my 327 PC. Awesome holster. Of the 8 CC guns in my rotation, with this holster the 327 PC is the most comfortable carry gun I own and the one that prints the least - even beats the single stack 9mm microcompacts i own. With smaller than stock grips, it completely disappears. I carry an 8 round quick strip in my pocket (sits perfectly flat) for a total of 16 rounds of 357 magnum on my person. Highly recommend.
Hello. Thank you for your order, but we do not make a holster for the olight and it isn’t listed on our site. We offer it for the Streamlight TLR1 and Surefire x300. If there was a mistake please email me at sales@kaosconcealment.com
Could you please make these for the model 19 carry comp? Edit: just found out that you already do, but it's just sold out. Well, at least now I found my perfect holster and I just need to wait.
Depending on the situation I wear this holster and gun appendix or at 3 o clock. Given the barrel is so short it does not dig or poke me like other pistols do. Just make sure to hike up your pants a little before sitting and it’s perfect. At 3 o clock it’s perfection.
Make sure to test it Iwb as you will be wearing it with your Edc belt. If it continues to be loose please feel free to email us. Sales@kaosconcealment.com
Looking at possibly picking this firearm up, eventually when the money is right (and when I can obviously find someone with it in stock) and I was wondering how you personally feel in terms of recoil management from this firearm when I comes to the 357 magnum. Would you consider it manageable in your experience? Thanks
It’s definitely manageable. It also definitely hurts. Like I said in the video. I shoot 38spl and 357 out of it for practice. 38spl just to get my trigger control where I want it. 357 because that’s what I carry. It’s up to you the balance of how you train but the recoil is 100 percent manageable in 357 magnum IMO.
I don’t see them either. Someone sent me a link at one point. I’ll see if I can’t find it. I think it may have been eagle grips that was similar to these.
A little on the trigger guard. That’s expected with any holster, kydex or leather. It’s hard for me to gauge too much at this point since I’ve tested hundreds of holsters with this gun and carry it most days. 🤣
Check the ride height and your belt line. If your belt line is above the cylinder it may be difficult to draw but the ride height is adjustable. It the problem persists e-mail me at support@kaosconcealment.com or text me 6614963707 if I don’t respond via email. 👍🏼
For a holster that is open in the front it probably wouldn’t work very well OWB. Check out our Fusion 2.0 holsters. They can be work iwb and owb so we are very familiar with the concept. A Fusion 2.0 for this gun may be in the future. 🤔
I bought this holster for my 327 PC. Awesome holster. Of the 8 CC guns in my rotation, with this holster the 327 PC is the most comfortable carry gun I own and the one that prints the least - even beats the single stack 9mm microcompacts i own. With smaller than stock grips, it completely disappears. I carry an 8 round quick strip in my pocket (sits perfectly flat) for a total of 16 rounds of 357 magnum on my person.
Highly recommend.
Try Barsony brown leather holster for 327pc. Even as fat guy, appendix works sitting or standing. It’s great. Just use a boot grip.
Just received mine today and it works great with my 327. Now I can start carrying it.
Do you really use this? I found it ridiculous. Zero chance he Carries this appendix lol. What a joke.
Coolest holster I’ve ever owned by far.
Great information for something I will be needing. Thanks and Blessings. (new sub).
Great review Just ordered one in grey for my 327pd. Need one for my 329pd also hope you get them.
Barsony brown leather holster for 327pc. Even as far guy appendix works sitting or standing. It’s great. Just use a boot grip.
I've been looking at the 327pc and now I know I can get a holster for it for everyday carry. I need a holster for my chalupa though.
That’s a lot of firepower there Hombre!
I just ordered one of your guys holsters tonight for my ltt berreta 92 with olight pl pro
Hello. Thank you for your order, but we do not make a holster for the olight and it isn’t listed on our site. We offer it for the Streamlight TLR1 and Surefire x300. If there was a mistake please email me at sales@kaosconcealment.com
@@kaosconcealment7408 i meant tlr-1
@@rylanmartin9040 perfect! Should be on its way soon
can you make a holster for the 627?
Can you make one for the S&W 327 Night Guard with 2.5 barrel? Or will this maybe fit it?
Would this fit the 627 2” or 3” barrel as well?
Could you please make these for the model 19 carry comp?
Edit: just found out that you already do, but it's just sold out. Well, at least now I found my perfect holster and I just need to wait.
Do you make one for the S&W 627 2.5in barrel?
I’m a lefty and I want to know if you can make me one for my s&w 19 k comp?
Can it be used as a cross draw holster?
so in that pic you are carrying it at the 4oclock position? how does it feel when sitting down? would you leave it on while driving?
Depending on the situation I wear this holster and gun appendix or at 3 o clock. Given the barrel is so short it does not dig or poke me like other pistols do. Just make sure to hike up your pants a little before sitting and it’s perfect. At 3 o clock it’s perfection.
Got your holster for the 327pd and I like it but the retention is not the greatest. I just wish it was a tighter fit.
Make sure to test it Iwb as you will be wearing it with your Edc belt. If it continues to be loose please feel free to email us. Sales@kaosconcealment.com
Does the kydex scratch the finish of the firearm?
Would be nice if you offered it in a more exotic color such as black.
Do you make this holster for the 327pc to be worn OWB on the left side for LH shooters?
Looking at possibly picking this firearm up, eventually when the money is right (and when I can obviously find someone with it in stock) and I was wondering how you personally feel in terms of recoil management from this firearm when I comes to the 357 magnum. Would you consider it manageable in your experience? Thanks
It’s definitely manageable. It also definitely hurts. Like I said in the video. I shoot 38spl and 357 out of it for practice. 38spl just to get my trigger control where I want it. 357 because that’s what I carry. It’s up to you the balance of how you train but the recoil is 100 percent manageable in 357 magnum IMO.
@@kaosconcealment7408 helped out a lot. Thanks for the quick response brother.
Too Many letters no problem. I’m going to be doing some shooting vids with my 327pc and do a full review in the coming weeks.
It’s a great gun. You can get 38 or 357 wadcutters in it if you want. Devastating to be shot couple times with either load.
Are you able to tuck in your shirt using the discreet carry clip?
Yes. With either the stock clip or dcc clip
@@kaosconcealment7408 thank you. I will be buying this next paycheck.
If I ordered it this weekend, how long would it take to receive?
Average lead time is 3-4 weeks, but we are baiting these out a little quicker than that. 👍🏼
What position is the best for this holster? Can you appendix carry it?
I tend to wear this holster at 3 o clock. I have worn it appendix many times and it is very comfortable for me there.
Your work looks excellent; but I have never been satisfied with single attachment holsters. No matter what, they tended to rock back and forth.
Agreed. The centering of the clip and the claw included really aids in keeping it in place.
@@kaosconcealment7408 , Update: I just ordered one of your holsters in Whiskey Brown.
Where did you get your mold gun from?
Would you be able to make on for 627 S&w?
We will in the future, but currently to not offer it for the 627pc.
In that case, @@kaosconcealment7408 I am going to order it for the 327pc this week
i dont see those grips under the n frame section. am i blind or are they not there?
I don’t see them either. Someone sent me a link at one point. I’ll see if I can’t find it. I think it may have been eagle grips that was similar to these.
I’m pretty sure those are VZ grips.
Any holster wear showing on the 327 using this holster?
A little on the trigger guard. That’s expected with any holster, kydex or leather. It’s hard for me to gauge too much at this point since I’ve tested hundreds of holsters with this gun and carry it most days. 🤣
@@kaosconcealment7408 Are these in stock or built to order? Lead time? Ready to add the 327 to my permit.
Do you guys have one for the 627?
Anyone else having issues with this exact set up? Mine is SUPER difficult to draw border line impossible. I’ve tried at appendix and 3 o’clock
Check the ride height and your belt line. If your belt line is above the cylinder it may be difficult to draw but the ride height is adjustable. It the problem persists e-mail me at support@kaosconcealment.com or text me 6614963707 if I don’t respond via email. 👍🏼
how does that cylinder feel IWB?
Es mi revolvers preferido. Alguien , me puede decir como adquirir esa elegante piesa.
Hermoso revólver.Cuanto cuesta en pesos colombianos
I have this revolver, do you have any holsters in stock?
We don’t stock then but they can be ordered on our site www.kaosconcealment.com/collections/the-guardian-holsters
Has the 327pc been reliable for you?
Yes, very. I have not had any issues with it whatsoever.
Would have been cool to add the OWB ability to it tho
For a holster that is open in the front it probably wouldn’t work very well OWB. Check out our Fusion 2.0 holsters. They can be work iwb and owb so we are very familiar with the concept. A Fusion 2.0 for this gun may be in the future. 🤔
@@kaosconcealment7408 definitely keep my eyes out for one of those! Keep up the great work
@@kaosconcealment7408 PLEASE MAKE THIS HAPPEN!
💪🏼💪🏼💪🏼
The clips sold out!!!
i thought you were going to talk about the holster
Did you watch the video? He talks about the holster...
4:28
Glock 20 or 29...drops 🎤