The Escargot - RV/Camper Car Transporter Conversion - Part 3
HTML-код
- Опубликовано: 2 авг 2019
- In part 3 of our side project, we play with a telehandler, do powerslides around a damp field and replace the engine in the Cargo.
Visit us at www.badobsessionmotorsport.co.uk
Become a Patron at / badobsessionmotorsport
Find us on Twitter @badobsessionmsp
And on Facebook too: @badobsessionmotorsport
Music - My Great Undoing by Of Men and Wolves from Epidemic Sound. 
Авто/Мото
![JDM Sleeper Mini [Season Premiere]](/img/1.gif)
This came just in time to prevent me from doing any more work this afternoon. That was a close one.
Dodged a bullet there.
Sad but true. Wait, it was too hot outside. Yeah, I couldn't have done any work anyway!
Damn same shit happed to me as well
Phew!
Came just in time for the evening throne visit, superb.
Air hammers are much more efficitive than other 'air' versions of popular devices, such as guitars.
Air waves are pretty good I find.
I've never seen an air guitar that didn't work as intended
@@kruleworld aye you're not wrong there.
@@kruleworld @Mat Gee He has a point 😂
Air balls thrown are never good.
The look on Richard’s face at the end when Nik says “Hold on a minute. I have an idea.” and Richard realizes the only thing he has to throw at Nik is his cup of tea.
Priceless.
that satisfaction of those gearbox mount bolts just dropping in after all that fab work, made me feel fuzzy inside :P
Did u expect any different?
Course, rubber mountings help ;).
GENTS! I work warranty claims for Cummins engines! PLEASE check the fuel pump, camshaft, and rockers! They all have a tendency to delaminate and contaminate the engine with metal.
CertifiedCarNut Isn’t it your job to answer ”gee wiz, I have never seem this kind of failure before” regardless? :D
That explains why our 14 year old Scania buses are more reliable than the streetlites. Engine rebuilds needed before 200k. Oil pump failures before 80k.
Thanks Cummins! (I really mean that, every time I drive one that breaks, I get a free break too!). The engine electrics are utter shite too.
@@jonasthemovie actually, its more like "oh this is common, heres money to fix it"
@@MrKristyon I'm a bus driver and sure the engine are reliable... but the rest of the bus is, we'll let's call it human.
Are there suitable replacement OEM or aftermarket components that correct these problems?
I cant believe you didnt do a rotary swap. Couldve easily fit like 8 rotors.
And 24 tips, each one waiting to wear out...
10 rotor engine with a Variomatic gearbox. The engine noise at speed would be amazing, it would easily beat the Mazda 787B LMP.
Although others might think you are about to explode.
And also get 2mpg with that truck
@@EmyrDerfel infinite content for us then !
Yumm oil
Got the cheese shop homage within the first couple of "nopes"! "Not much call...it's the single most popular --". Loved it!
You beat me to it.
I was wondering when they start naming cheeses instead of motors LOL
@@gusser2121 No religious references please.
ruclips.net/video/Hz1JWzyvv8A/видео.html
Metric f*ck tonne - one of my favourite measurements.
nearly as good as 'freedom units' from Part 2
ahah Love a PFI reference, keep up the good work!
Everyone loves Brent :)
Boosted Boyz and Brent are exeptionally nice people. I also liked the reference
care to share the timestamp? didnt catch that
@@LuanCristianThums 2:40
Loved the shout-out to Brent at PFI Speed
Timestamp?
@@elliottvader2377 not sure of time but when they are talking about which engine to use and for the Honda he says something like not even Brent could get enough grunt out of this thing
Timestamp is 2:35
@@mikeymasi ahh i missed it
Excellent! (My wife watches Poldark over and over again, me I watch two guys stripping down a Cargo and a DAF over and over again!) just brilliant.
“This is a totally inappropriate hammer”
“Hit it”
This is a sample waiting to happen.
Air hammer time!
2:40 PFI ref nice, we all love brent
"It's a clean shop."
"It's certainly uncontaminated with engines..."
Hahahahahaha..love it.
Shop is always clean when nobody's workin
@@mazdarx7887 It's Tea time.
After you mentioned that piece of iron you hit your head on, I ducked into my chair when you got up.. 0_o
27 minutes 45 seconds. Really gives a good benchmark on how long an engine retrofit should take 🤣🤣🤣
You mean a swap can be done in under 10 years?!
Believe that was what we used to pull the engine off a Sunbeam Avenger, repair the clutch and stuff it back in again.
I’m in GMT -5 ... smack dab in the middle of my work day. Thank god for earphones and small screens. I have gotten absolutely nothing done this afternoon. This stuff always makes my day ... thanks
“I’ve had an idea” really means
Add another month of working on this thing
This project is really Cummings together.
Great episode fellas. I don't know why anyone would watch normal tv over this. Pleasure to watch you guys build
Hmm a challenge! 😂🤣, I’m gonna need some gearing . Thanks guys!! I have a Bad Obsession!!🦅
How do you not have any responses haha! Love your content too! But Binky Vs Bully!
After when he said Brent I went straight to the comments and there you are.
holy fuck its pfi speed
just watched them win cleetus mcfarlands le mullet race.
Of course you guys follow bad obsession
The soothing sounds of impact wrenches and heavy metal parts chucked on the floor. mmmmmmmmmmmmm thanks boys :)
"The second metric f@#k ton of superfluous wiredge..." best thing I've heard today!😍🙌
I had a professor stop a lecture to make the comment "I've never understood the difference between a shit load and a metric f*#kton."
man when they where spreading them frame rails apart... i was like wont that fuck that up ? and then i remember that was the pos they bought for parts
Giving Brent a shout out haha, He will be pumped.
Any pointers for someone who doesn't know Brent?
@@steveman1982 look for the PFI Speed channel. Very talented tuner who works primarily on Honda's.
@@BigD256 cheers!
@@steveman1982 he makes appearences on boosted boiz and cleetus mc farland sometimes
Impressive how well known Brent is getting known now. Especially now that he's got his own channel.
"The LS engine never came to this country officially", gentlemen may I remind you of the Vauxhall Monaro VXR 😉
Unfortunately, it was a pretty limited run and I'm told they're very expensive 2nd hand. And the mpg would still be atrocious.
@@aussiebloke609 still, would have been an improvement over the old engine
Feel sorry for you guys we had ls since 98
@@Zeke___Marsh We'll make do with a massive stockpile of oddball JDM and Euro engines.
I've followed the Binky build all the way through and now you have me addicted to watching this one. You guys are monsters!
Love the cheeky PFI referance
51 seconds in and we have a AvE reference, that's the way to start an episode.
AvE just uploaded an update to the diesel jeep too. im sensing a good hour or so coming up
musing melodies me tooooo 😎😎😎
"Keep your d!ck in a vice."
Taaapy tap tap.
"cause people are monsters"
"you'll be my great undoing" playing over an engine removal.
I see what you did there!
You guys and Colin Furze have the BEST Montage Music :). Actual Music..
I'm still waiting for a Bill Mcclintock mash up.
Colin Furze doesn't show us how he makes his stuff - not like these guys.
One does not simply dismiss a Scania V8 with a simple "No"
Too big? Ok, I understand. Too thirsty? Ok.
But not a simple "No"!
scania v8 would snap that old chassis lol
Hi, Joel! Don't worry - no disrespect was intended. They were performing part of an old (very silly) Monty Python sketch, where 'No..." featured heavily. :-)
It's like putting an engine and transmission in a shed... Good work guys, keep it up
Pacific Car company made rail wagons under various names then bought Kenworth in 1945 and Peterbilt in 1955 or so and they focussed on building trucks.
Since they weren't building rail cars anymore they changed to PACCAR. They purchase DAF and Leyland in the late 90's.
PACCAR actually makes it's own larger engines now and is slowly dropping Cummins from its truck line up.
Interesting bit of history.
Love how you can hear the rain pouring over great britain while they're measuring the engine brackets
OKOK, you guys are extremely cool and you make great videos, OK, so $5.00 USD per month should cover some of the tea! Love all of it, I expect to die watching you guys now that you have my money!!
You HAVE seen how much tea they consume, right? 🤔
PFI reference FTW. Great work as always
Poor Nik not being able to fabricate anything this episode.
Also, minor point of contention, An LS engine did make it to the UK though I think it's called a LA something or other. It's the power plant in the Vauxhall Monaro.
They all came with LS1/2's and I'd imagine they'd fetch a small fortune with how limited of a run it was.
The Monaro cost upwards of 15K 2nd hand usually, at least for any sort of GT version, the last run of Monaro GTR-S's went for around 50K each I think, although possibly more than that, no way you'd get them cheap for parts, cost of shipping them and the poor MPG/KPL simply don't make sense to have them in this build
Wasn't suggesting they actually use one. Just pointing out the LS was available there, though when a lot of people say LS Swap they mean the LSX.
Did the isuzu cargo trucks have then too?
RIP Holden...
You guys clearly watch the best other car guy RUclipsrs. Cleetus, Brent, Kyle, Moog, Marty, Alan and Benny are the ones! The detail you show in these vids is very much appreciated. Best RUclips projects for years on this channel.
HighDef Gaming we all are grateful and appreciate you,
@@PFIBrent Thanks :) You made my day :D
High Def ___You forgot"Edd China" !!!!!!
These guys have incredibly made an engine swap on an ugly old truck a fascinating learning experience and a brilliant bit of fun
Total heroes 😍😍😍😍😍
I've had an utter shambles of a week: this was a welcome sight! Cheers, Lads!
I do hope Brent saw this 🤣🤣 awesome work guys!
Nik and his ideas at the end of the video. And lovely Shropshire rain adding an ambience to the reintegration of a decent Cummins into the mix. Tomorrow, I shall re watch part 4. Such good content.
The most satisfying part was when you lowered the engine down onto the mounts and all four lined up perfectly.
Have to say, we were pretty satisfied with that ourselves.
Woha! A PFI Speed / BoostedBoiz refrence! Hell yeah. They have made it!
Omg Brent from PFI Speed got some BOM love! He deserves it, what a good dude!
So impressed by how nicely y'all fit that ISB 4 and ZF 5speed in there. That drivetrain would've been my second choice. Here in the States I could get my hands on a 6.7l I6 Cummins and 6speed for not much more $$$. Make that camper lay rubber for a city block.
I almost always forget, that these guys actually know and watch other YTers. Especially love the tongue in cheek comments about them too 👌🏼
Freedom units (Alec Steele), Brent (PFI), among others that I’ve already forgotten 😂
Safety squints engaged! Skookum as frig.
Literally Shaking-____Is that the same"Shmoo" as the ones in"Lil Abner" comic strip by Al Capp back in the 40's &50's ???????? If so you didn't have to be atraid of them .They were gentle "critters" !!!!!!!!!!!
Literally Shaking____"Schmoo"
Just when I thought y'all couldn't be any more awesome, you reference Brent! Brilliant!
I'm impressed by how many bolts and nuts came loose on this project.
Now see, this is why I watch these guys. If I'd tried to do any of this somebody would have been killed.
"Barra?" Mate, that would have been a fkn winner.
The internal codename for the Barra engine during its development was 'The Gull' (short for Seagull) because it shits on everything #straya
Mitchell Denham 😂
Fuck I hope that’s true. And Barra cause it’s the greatest fish that no one can catch 👌🏼
Lads at Haltech sent me! 👌
Secretly, the Mini has been finished for over a year...
Spoilsport!!!!!
Proper engineering is beautiful! Thanks for half an hour of enjoyment!
perhaps a third member swap to "add lightness" and aluminium wheels to match the front axle swap for bolt pattern. that bumper cover on the parts truck looks pretty sexy as well
Bracket man and funk boy strike again.
Strik??
Damn that cheese shop-sketch adaptation was brilliant! :D
Never underestimate the value of the safety squint! Right up there with "can't hear anymore so not a problem" fix! 👍😁
As someone who works for a Paccar brand in the US, I loved seeing that ISB with the Paccar badges. Good choice in motor.
That's a great Cheese Shop reference, thank you guys!
25:28 The most satisfying bit of video I have seen on RUclips for a long time. Well done lads! Square on the money 👍👍👍
That PFI reference was 👌! Keep up the good work lads.
This takes me back, I used to wk on a fleet of these back in the day, the 0811's,0813's and the 0815.😁
Im not going to lie, Ive been so keen to see what you guys condure up with this beast
I can hear the angelic voice of Turbo Yoda imploring you two to utilise the extra room up front for a big intercooler and big turbo!
Mate, yoose yah space whizly fur the bhoost
Yeah, a compound turbo setup!
Nitrous
Already is,you mean bigger.
@@nssherlock4547 :
ruclips.net/video/Ssh47oyOSXM/видео.html
I guess I’m rewatching all these. Can’t wait to see this finished.
Small thing in big holes easy, big thing in small holes hard. I learned something today.Thanks
How cool would it have been if they got UrchFab to make up the adapters on his CNC plasma
I thought the same :)
I think Matts machine would struggle with 20mm plate. But a nice idea nonetheless
perfect vehicle for a tesla drive train swap with solar panels on the roof and extendable solar awnings. if there's anyone that can do it, its you guys.
haha a 10 second escargo
Hands down the best channel for motor/mechanics stuff on the 'Tube
'It's the single most popular swap in the world!!'..'not round here it isnt'...got to love the Monty Python reference XD no wonder this is one of my most favourite channels on youtube.
This is really weird. I spent all of yesterday and today thinking about when you guys might release a new episode and this just popped up! Out of the 100+ channels I subscribe to this the only one I will drop anything for when a new video comes out 🙂
Power of prayer is underestimated..
Zylon FPV we must be mad!
Not weird. You're just going through a withdrawal before they release. Implications...
Someone has been following PFI Speed and the Boostedboiz 👍
you just know that when Nik says "I've got an idea" there's going to be a lot more fun to be seen by us!!
Loving the escargot build cant wait to see what happens next!!
I think this is the first Bad Obsession video i've ever watched where nick didn't even make 1 bracket ! But, i could be wrong , the series has been going a while..... :)
Hahaha! Nice Cheese Shop paraphrase! :)
I've done stock replacement engine swaps that don't line up as good as that!
That new driver is doing well pushing that step drill through that chassis rail
Why do I find two blokes working on an ancient library truck much more enjoyable than all those videos about fixing crashed supercars, or pretty much anything else ? even Binky if I am honest !
Just a guess, but the DAF axles are better than the old stuff, and now for axle swap!
Was my first thought. though I expect the DAF to have narrower track, could all be re-engineered I suppose.
I would've swapped as much as possible over from the DAF too: gauges, wiring, bulkhead module, brakes, wiring etc. Get the most out of that £1005.00 y'all spent.
"If we didn't have an angle-grinder, and an almost pathological desire to use it."
So, Blackhurst has become "we" now, has he?
It's the Royal use of the word "We"
You've never used an angle grinder on something that Really didn't need it?!
Can’t put my finger on as to why but absolutely thoroughly enjoyed this instalment.
Everybody seem to have suggestion what you should do, so here is mine from Finland
1.Stop your dayjob.
2. Stop sleeping.
3. Start 2 new projects.
4. Make YT videos 24/7.
5. Ignore 1 to 4 and keep up the good work.
Yours sincerilly Andy
Would a twin turbo DAF be DAFTT?
I wonder if it's a-Ford-able...
I see 👀 what you did there.
Just glad I wasn’t drinking my coffee at that moment. 😂🤣😂🤣
No, it would be a Turbo Twin. Google that
Would be a DAFTT, Punk ! ^^
Good effort! Keep up the good work!
I work for a truck bodybuilder, I would be aware of drilling holes too close together especially on cross members, normal minimum is 50mm centres.
You could weld up redundant holes which are too close.
Kettle on!...
I think they are doing a "dry" build and then they will plug those holes, but great suggestion mate :)
fila1445 The ugga dugga approach to torqueing those bolt suggest that.
@@fila1445 The wait a minute on the end makes me feel like there's something more coming to this than 'just' an engine swap on a cabover.
Can't wait for the next episode, it's surprising how fast a project goes when you have loads of room compared to the mini! Keep it up guys!
Bad Obsession and coldwarmotors in the notifications this am. The yard can wait!
Nice engine/gearbox choice. I have always been a fan of Cummins, they are my bread and butter here in Canada.
Wait a sec... You've got compressed air on this thing, lots of space in the engine bay... Time for some Airchime K5LA horns?
They arent americans and im not either but: hell yea
Hi from Nova Scotia 🇨🇦 great projects guys, keep up the great work!
That's it! I'm at this point with you guys!... The point at which I put a thumb up vote before I even watch the clip because I already know it'll be good!!
Did you guys notice the sneaky plug from Al at the skid factory
According to Wikipedia, you still ended up with a (cummins) B series swap.
Yeah.... but no V-tec.... such a waste
With V-tea yo.
Yup, its a 4bt, 2/3rds of the infamous 6bt. In the US, the most common vehicle application for these motors is box trucks, usually bread vans.
@@machinist7230 Yes a TRULY HORRIBLE little box of rattles.
@@machinist7230 We know ALL about that horrible little thing in the U.K. both D.A.F. and IVECO were conned/pushed into fitting that vibration device.
Yea Brent bringing the co car scene worldwide!
need part 4 of this series ....addicted now!!!!
It would be great if all engine-swaps went as smoothly as this one!
Wonder whether one of those Paccar TDs would squeeze into my Pajero Shorty!?!
From my perspective, the cab and chassis you got for the engine. Appears more fitting for your hauler vs the yellow school library on wheels you have for your project now.
I think this things going to be a sleeper/workshop too
@@Paul-sc6ic Well it might be someplace to sleep. But I don't know about much work getting done in it.
Excellent. And the look of defeat at the end where Richard KNOWS that this project just added another 3 years to it with that one line.
Love the fact you know Brent from PFI/Boosted boiz........ 👍