Great Video. I am a 68 year old woman with mechanical ability but I was not looking forward to this job. Luckily I had the T30 Torque driver in my tool box. Took about and hour as I struggled with detaching the clips on the bottom of the interior door panel. Persistence prevailed and the job is done. Now I can change lanes to the left without fear once again. Great video. Thank you Guys!
Couldn't ask for a better DIY video. We have a 2019 and everything looked pretty much the same excluding a couple more upgrades electrical connections. Thank you
Great instruction video. One change we did was rather than disconnecting the door controls, we left them intact and propped up the inner door panel. The mirror only came in black rather than the beautiful gold for the rest of the body, but in 2024 we don’t care that much. Thanks again and God bless you and yours.
Of course! Yeah sometimes its' just knowing where to start and what's behind the covers. Thanks for taking a minute to leave some feedback! Hope the job went smoothly!
@@HowToEscapeDIYTipsandReviews It went really well, overall. I was doing the driver's side... there is a fourth harness, and you may have covered it but it wasn't in my notes... couldn't get it, but propped the panel up so I could finish. Don't know why they use different 'tricks' for different clips. Anyway, all good, no broken clips, no pieces left over, lol. thanks again. :)
Thank you for for this! and to think ( like almost everything on the escape's, from battery placement to changing a damn turn signal bulb..) if that one piece that we remove laterally was designed a little differently, no interior panel removal would be necessay. This vehicle was completly designed to have it come back to the shop to pay the hourly labour fee... So thank you again for all your hard work. Thank god the windshiled washer fluid is accessible... lol (but you'll never know when you're out..) lol cheers
Hi! I’m so excited and kind of proud of myself because this chick used your video to replace the side-view mirror on my 2015 Ford Escape! The only difference was there was one more wire harness connection I had to disconnect which was not in the video (maybe because mine is Titanium edition?). And one tip, which I learned by mistake, was to make sure the door handle wire connection is up through the panel before reinstalling the panel.😂 I had to remove the panel again and fish it out, then reinstall the panel again. But it works like a charm! Thank you!
Why did you go to the bother to unhook the door latch cable and plug? Why not just hang door panel on a hook and slide the mirror panel back to get access to the mirror bolts?
Hi! Love the vids, so much help doing projects on my 2013 Escape. I am replacing a puddle light to an LED Ford logo projection housing. Do you happen to know the size of the small torx screw that attaches the housing to the body of the mirror housing?😮
Hey there @Sparxxx, yes it is- I have not done it myself yet but just looking at the mirror glass itself, it appears you purchase the part with the mirror on front, and a plastic backing with a circular snap profile that you press onto the mirror motor. If you have higher end features like heated glass, directional light, and/or blind spot sensors, those wire connections are on the back side of the mirror as well. Check out this link here for an example of what the glass / plastic part looks like- hope this helps: www.tascaparts.com/oem-parts/ford-mirror-glass-passenger-side-rh-cj5z17k707b?c=az0x
Hey Jonathan- I don't have a direct way to verify for you but I'd bet $5 that it is generally the same approach. Remove the interior panel behind the screws, unclip the wire harness, remove the screws holding the mirror in place, and gently lift the assembly away from your door. Obviously the details may differ slightly with how interior panels may be secured but I wouldnt' think Ford would switch it up TOO much from one body style to the next as they're still quite similar. The jump to 2020 may be very different as it's a whole new look to the vehicle interior / exterior, but if you're in a 2019, it should be similar.
@@PD-be8bi no luck unfortunately. I saw other videos but not detailed ones where you buy a heating pad type of film and have to install it behind the mirror and have the wiring done with fuse maybe but it was not detailed enough for me to do it myself so I left it to stock mirrors
Hey there Patrick- so just to make sure we're on the same page, you're talking about the painted front cover of the side mirror? And by glass do you mean the turn signal?
Hi there! I can't exactly verify as I only have access to my 2013, but the principle to remove a cosmetic panel to expose the mounting nuts/bolts are pretty common. It may be a different panel removal approach but it will / should be mostly the same. Wish I could help you more here- sorry!
Hi, loving the videos any chance you could do a video on how to remove the middle console where the handbrake is, I need to remove the cigarette lighter socket as it's not working. 😊
I found some (just ordered one) on LKQ Online for $60 w/ free shipping. Took about a week, but I just got it in today. It's used, but looks in the same condition as my undamaged driver side mirror.
some dumbass smacked my mirror into bits on my street, parents get the driveway so i had no choice lmao. anyway, mirror is cracked and the front cap thing came off. can’t move the mirror with the automated switch thing, think i should just buy a whole new mirror?
Ugh- sorry that happened. So if the front cosmetic cover popped off, that can be replaced, but does it need to be? Is it damaged or did it just come off? I ask because you can definitely get a new one, but getting it paint matched is a bit harder to find - they usually come primed and ready to paint so that would be one more thing you have to do. Also, you SHOULD be able to pop the glass off of the motor gimbal inside the mirror assembly. They snap in there. If you look at the Tasca Parts website and just look at the exploded view drawings of the mirror assembly it should show the snap system which holds the mirror glass on there. ALL OF THAT BEING SAID, yes, it may be a whole lot easier to go on eBay and find a mirror assembly that matches your color and features and get that since it's already painted and the glass is intact. Make sure it doesn't have too many or too less features than your vehicle though, or sometimes the wire pinouts will be different. Let me know if this makes sense- here if you need more help.
Solid advice. I did this while project based on this video in about 15 min with no experience and it went without a hitch.
Without doubt the best DIY video I have ever seen and, at 85 years old, I've seen a lot.
Great Video. I am a 68 year old woman with mechanical ability but I was not looking forward to this job. Luckily I had the T30 Torque driver in my tool box. Took about and hour as I struggled with detaching the clips on the bottom of the interior door panel. Persistence prevailed and the job is done. Now I can change lanes to the left without fear once again. Great video. Thank you Guys!
Couldn't ask for a better DIY video. We have a 2019 and everything looked pretty much the same excluding a couple more upgrades electrical connections.
Thank you
Great instruction video. One change we did was rather than disconnecting the door controls, we left them intact and propped up the inner door panel. The mirror only came in black rather than the beautiful gold for the rest of the body, but in 2024
we don’t care that much. Thanks again and God bless you and yours.
Fantastic instructions - had the whole job done in under an hour - much appreciation to you! 👍🏻👏🏻😃
Many thanks from the UK, this video saved me from breaking so many clips. . . 👍
Thanks so much... it takes most of the potential drama out of it when someone shows you how some of these things fit together.
Of course! Yeah sometimes its' just knowing where to start and what's behind the covers. Thanks for taking a minute to leave some feedback! Hope the job went smoothly!
@@HowToEscapeDIYTipsandReviews It went really well, overall. I was doing the driver's side... there is a fourth harness, and you may have covered it but it wasn't in my notes... couldn't get it, but propped the panel up so I could finish. Don't know why they use different 'tricks' for different clips. Anyway, all good, no broken clips, no pieces left over, lol. thanks again. :)
Thanks for this. Just changed out a side mirror with your help.
Thank you for this.... took 20 minutes out of my day to complete.
Excellent! Thanks for taking the time to give this feedback, Brandon! Glad it was a quick job for you.
The absolute most comprehensive and best instructions! Thank you so much!
Thanks!
Absolutely! Thank you very much for the generosity!
Thank you! Great instructions.
You all are amazing! I can’t thank you enough for walking me through this process. Keep it up if you’re still at it!
Note: while installing the inner door panel connect the electric connector and door lock cable!
Perfect clear advice. Hardest part is definitely those push clips!
Yeah absolutely. They're tricky. Hope you got the job done and that this was able to save you some time!
Thank you for for this! and to think ( like almost everything on the escape's, from battery placement to changing a damn turn signal bulb..) if that one piece that we remove laterally was designed a little differently, no interior panel removal would be necessay. This vehicle was completly designed to have it come back to the shop to pay the hourly labour fee... So thank you again for all your hard work. Thank god the windshiled washer fluid is accessible... lol (but you'll never know when you're out..) lol cheers
You are spot on! Like you said, even the battery is a pain!
Hi! I’m so excited and kind of proud of myself because this chick used your video to replace the side-view mirror on my 2015 Ford Escape! The only difference was there was one more wire harness connection I had to disconnect which was not in the video (maybe because mine is Titanium edition?). And one tip, which I learned by mistake, was to make sure the door handle wire connection is up through the panel before reinstalling the panel.😂 I had to remove the panel again and fish it out, then reinstall the panel again. But it works like a charm! Thank you!
Do you have side mirror heated option?
Excellent, detailed video. I was able to do this with zero experience.
Fantastic instructions! The process was the same for my 2019 Escape. Thank you for uploading this.
Perfect video! 100% easy to follow!
Thank you so much your are a excellent teacher. Very well your video. 👏🏽👏🏽👏🏽😄
Great video, easy to follow, thank you!!!
Thanks so much !!! WE just did it. Worked like a charm!
Is the process for a 2017 escape largely the same? Are there any big differences in the process?
Why did you go to the bother to unhook the door latch cable and plug?
Why not just hang door panel on a hook and slide the mirror panel back to get access to the mirror bolts?
Can I replace my side mirror with heated mirrors if so do I have to change the wiring harness
Hi! Love the vids, so much help doing projects on my 2013 Escape. I am replacing a puddle light to an LED Ford logo projection housing. Do you happen to know the size of the small torx screw that attaches the housing to the body of the mirror housing?😮
Is it possible to change a cracked mirror on the side mirror myself?
Hey there @Sparxxx, yes it is- I have not done it myself yet but just looking at the mirror glass itself, it appears you purchase the part with the mirror on front, and a plastic backing with a circular snap profile that you press onto the mirror motor. If you have higher end features like heated glass, directional light, and/or blind spot sensors, those wire connections are on the back side of the mirror as well. Check out this link here for an example of what the glass / plastic part looks like- hope this helps: www.tascaparts.com/oem-parts/ford-mirror-glass-passenger-side-rh-cj5z17k707b?c=az0x
Any idea if these are the same steps for a 2019 Escape?
Hey Jonathan- I don't have a direct way to verify for you but I'd bet $5 that it is generally the same approach. Remove the interior panel behind the screws, unclip the wire harness, remove the screws holding the mirror in place, and gently lift the assembly away from your door. Obviously the details may differ slightly with how interior panels may be secured but I wouldnt' think Ford would switch it up TOO much from one body style to the next as they're still quite similar. The jump to 2020 may be very different as it's a whole new look to the vehicle interior / exterior, but if you're in a 2019, it should be similar.
Thank you so much! Great work on your video. Cheers
Would definitely check and make sure the mirror functions BEFORE re-attaching door panel and screwing down everything
This was awesome! I am looking to upgrade the side mirrors on my SE to heated side mirrors, any chance you can make a video on that?
Any luck?
@@PD-be8bi no luck unfortunately. I saw other videos but not detailed ones where you buy a heating pad type of film and have to install it behind the mirror and have the wiring done with fuse maybe but it was not detailed enough for me to do it myself so I left it to stock mirrors
I broke the trim around the mirror, any way you can post a how to on replacing just the front glass and trim on the side mirrors?
Hey there Patrick- so just to make sure we're on the same page, you're talking about the painted front cover of the side mirror? And by glass do you mean the turn signal?
Great video....
Thank you Juan! Give a shout if there is anything else you are looking for for your Escape- hopefully we can help
Are these the same steps for a 2020 escape?
Hi there! I can't exactly verify as I only have access to my 2013, but the principle to remove a cosmetic panel to expose the mounting nuts/bolts are pretty common. It may be a different panel removal approach but it will / should be mostly the same. Wish I could help you more here- sorry!
Thank you spot on advise
Hi, loving the videos any chance you could do a video on how to remove the middle console where the handbrake is, I need to remove the cigarette lighter socket as it's not working. 😊
how much do you expect to pay for this part? when searching google I can find for about 160$ but on autozone its looking like 320$
I found some (just ordered one) on LKQ Online for $60 w/ free shipping. Took about a week, but I just got it in today. It's used, but looks in the same condition as my undamaged driver side mirror.
another great video....thanks
Thank you for the encouragement, Philip!
Fantastic video! Thank you!!
Thanks for useful video
Really handy video thank you. Just one note when you put it back together don't miss to connect back the door latch a locking button cable.
some dumbass smacked my mirror into bits on my street, parents get the driveway so i had no choice lmao.
anyway, mirror is cracked and the front cap thing came off. can’t move the mirror with the automated switch thing, think i should just buy a whole new mirror?
Ugh- sorry that happened. So if the front cosmetic cover popped off, that can be replaced, but does it need to be? Is it damaged or did it just come off? I ask because you can definitely get a new one, but getting it paint matched is a bit harder to find - they usually come primed and ready to paint so that would be one more thing you have to do. Also, you SHOULD be able to pop the glass off of the motor gimbal inside the mirror assembly. They snap in there. If you look at the Tasca Parts website and just look at the exploded view drawings of the mirror assembly it should show the snap system which holds the mirror glass on there. ALL OF THAT BEING SAID, yes, it may be a whole lot easier to go on eBay and find a mirror assembly that matches your color and features and get that since it's already painted and the glass is intact. Make sure it doesn't have too many or too less features than your vehicle though, or sometimes the wire pinouts will be different. Let me know if this makes sense- here if you need more help.
@@HowToEscapeDIYTipsandReviews
appreciated my friend 🤘🏼 i’ll probably go with the replacement option. i have it in the right position with tape 😅