for people asking about the Norbide stick / Boron carbide stick the best place to get this is on ebay... also the diamond grit shown here in the slide show is for 8k or 8000 diamond on copper for pre polishing most stones but especially Sapphire, CZ, YAG, Garnet ect it eliminates any undercutting or orange peel from a 1200-1500 lap and is what I'm showing here on how to properly prep the copper lap for either 8k prepolish or 50k-100k+ for polishing, though the laps surfaces will look different for the pre polish as it will be oilier with crystal lube used as opposed to polish which is very dry with only one drop of WD40 used. here is the link I use for the Boron carbide stick on ebay; www.ebay.com/itm/281069355184?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Just a note on this side presentation; To contact me on Facebook go to my name or Phenomenal Facets on Facebook. The Phenomenal facets. com website is no longer in existence and has been shut down for quite some time now... so go to Facebook to reach me. ;)
Hello Ali Ali - Terima kasih atas minat anda. Kami mengesyorkan agar anda melihat laman web www.ultratec-facet.com - Anda boleh membeli mesin secara langsung dari laman web ini dan mendapatkan harga penghantaran terus ke lokasi anda.
Наука
So grateful for this video!
Really helpful video. Rest in peace Stephen.
Helpful video, thanks
for people asking about the Norbide stick / Boron carbide stick the best place to get this is on ebay... also the diamond grit shown here in the slide show is for 8k or 8000 diamond on copper for pre polishing most stones but especially Sapphire, CZ, YAG, Garnet ect it eliminates any undercutting or orange peel from a 1200-1500 lap and is what I'm showing here on how to properly prep the copper lap for either 8k prepolish or 50k-100k+ for polishing, though the laps surfaces will look different for the pre polish as it will be oilier with crystal lube used as opposed to polish which is very dry with only one drop of WD40 used. here is the link I use for the Boron carbide stick on ebay;
www.ebay.com/itm/281069355184?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
eu como lapidario das antigas fico feliz com tudo isso.muito bom.
Where can the Norbide Stick that is shown be purchased?
Just a note on this side presentation; To contact me on Facebook go to my name or Phenomenal Facets on Facebook. The Phenomenal facets. com website is no longer in existence and has been shut down for quite some time now... so go to Facebook to reach me. ;)
(Stephen was a good guy ) RIP
Where i can buy norbide
should the same process be done with a zinc lap?
Como, faço pra, como, uma, máquina, desta, obrigado
se puede hacer en cualquier torno ...
Y puedes utilizar discos de cobre, estaño y de plástico y algunos otros metales ...
Dimana boleh mendapat mesin cutting permata Di malaysia
Hello Ali Ali - Terima kasih atas minat anda. Kami mengesyorkan agar anda melihat laman web www.ultratec-facet.com - Anda boleh membeli mesin secara langsung dari laman web ini dan mendapatkan harga penghantaran terus ke lokasi anda.
Are these discs copper?
And can you give me some information on where to get it?
All our laps are available at www.ultratec-facet.com
Kodei Muito Po
Aki
Pral