And here i am perfectly fine with my flat stock rails 😂 i never really find myself having clearance issues but i also don't ride super gnarly like these guys
Community: "OMG aCkSHuaLLy it's X cLeArnCe nOt Y geT gUd" TFL: ok here's a video of exactly what it is. Community: "OMG y u mAek a sTooPid bOrIng vIdEo oF meZuRMents n bOrINg sTufFz" I feel bad for any business catering to this demographic. I really do.
The level in the thumbnail is properly angled. :) Anyone else miss Bodhi's outros? It's like one day he stopped, and then he got Brailed on us. Gone, without even a final outro. I'm joking of course. Float on my friends.
You can always get the recurves and then swap to wtf. That way the controller will be leveled +2 degrees and you just need to add 1.5 in custom shaping to bring it perfectly level.
Dear Robert, are you working on the new rail? I think for measurement, the Dub Tail would give you more clearance in the front and back to the rally rail. Am I right on this information?
@@auston911 see like I would, I’d really love to, but it’s REALLY EXPENSIVE, and THEY *already have one!*🤣🤣 and they offer thorough opinions and reviews on these kind of things and I was kind of waiting on it before I buy or not
Need some advice. Looking for the power and look of the rally but want the range of the regular gt. Some ppl build their own. What would u recommend doing? Anyone?
Can we get WTF STD on recurve balance board vs WTF on non recurve balance with GT/S with 3 inch tilt from shaping app vs WTF on GT Before 6109 update using tilt app.?
Why could we just see a non scientific test up and down some trails. Either its a fun board to ride or its not. Also future motion 100 percent stol....inspired by floatlife rail designs.
Slightly lower clearance is actually more fun to ride because it's more stable, until you catch your nose where you weren't expecting. So we did a trail test, where we found it caught the nose a little easier than a stock board, and then we did this scientific test to figure out that 1 degree nose up would perfectly fix the issue.
I didn't watch the whole first vid and I didn't watch this whole vid. It was clear to me nothing in the first vid was highly scientific or precise which is fine with me. I would rather entertainment over engineerding.
yeah this might need to be done again, the plate sets a higher level so when you drop the front of the board it is not on the plate level so 14º would not be correct.
Yep, because there is no tire. The plate raises the center of the rail up to where it would normally be with a tire on it. With this setup, we eliminate all the tire variables, like psi, roundness, and rolling side to side.
Not even ONCE did Robert ask Nico to hand him a ten mil socket or "hold the light better".
It’s because they lost all the 10mm and all they forgot to charge the flashlights after the last night ride 😜
Hahahahahahahahahahaha fucking hilarious
The fact that you would recreate this, why you guys rock so hard~!~
Excellent update video on Recurve rails. FM said the clearance was unchanged from straight rails and now I know the truth.
Nothing says fun to us onewheelers like graphs, charts, and measuring things
Claims must be verified.
And here i am perfectly fine with my flat stock rails 😂 i never really find myself having clearance issues but i also don't ride super gnarly like these guys
Same here, in terms of dollars for performance, rails comes in last.
What a killer tag team!!
lol gold in that description
If u were going to gtv a board. What board would u use for range and power?
Thinking about, doing the freestyle trick competition am I allowed to use flight fins
I just learned red lobster was closing 😢
Science at its best! Newton would be very jelous of this team ❤
Community: "OMG aCkSHuaLLy it's X cLeArnCe nOt Y geT gUd"
TFL: ok here's a video of exactly what it is.
Community: "OMG y u mAek a sTooPid bOrIng vIdEo oF meZuRMents n bOrINg sTufFz"
I feel bad for any business catering to this demographic. I really do.
Mistakes lead to wisdom, wisdom leads to success.
Albert Einstein
Nice work Robert!!!!
The level in the thumbnail is properly angled. :)
Anyone else miss Bodhi's outros? It's like one day he stopped, and then he got Brailed on us. Gone, without even a final outro. I'm joking of course. Float on my friends.
Rally Recurve Rails simply aren’t worth it with less clearance. WTF’s are the way to ride
The Recurve are -1 degree front clearance do you know what WTF rails are for front clearance?
@@uhjyuff2095 3.5° if I remember correctly, but I’m sure you guys can make a video on WTF rails just like this video
You can always get the recurves and then swap to wtf. That way the controller will be leveled +2 degrees and you just need to add 1.5 in custom shaping to bring it perfectly level.
@@robertallen4378 it would be nice if Future motion was simply add a re-level button for your custom rails in the app
This is a great video, but Jeff needs to order a lab coat for the shop 🤣
Super missed opportunity! I actually have one sitting in my office
Dear Robert, are you working on the new rail? I think for measurement, the Dub Tail would give you more clearance in the front and back to the rally rail. Am I right on this information?
That's correct
What rail can have -1 in the front and be worth riding at all?
Dude just go ride it
Thats your job😊
@@auston911 see like I would, I’d really love to, but it’s REALLY EXPENSIVE, and THEY *already have one!*🤣🤣 and they offer thorough opinions and reviews on these kind of things and I was kind of waiting on it before I buy or not
We did that too!
Haha I’m glad you made this video.. at the same time I wish you didn’t have to
This is all fine and dandy but when are we going to get a Jeff ride video in Sacramento outside the shop
Here you go: ruclips.net/video/LMKOsJfQDhg/видео.htmlsi=h42Ach4A_l9JtIVM
@@TheFloatLife I meant on the GTS with the rally rails
@@dash4786 there's a video they sent you THAT specific video lol
Need some advice. Looking for the power and look of the rally but want the range of the regular gt. Some ppl build their own. What would u recommend doing? Anyone?
GT-V is a great option for that
So… make a rail that matches the front angle but is dub tails or WTF’s in the rear? 🤔
And still not lab coat! (Everyonesacritic)
It might be time to get one.
😂 yall are the fucking best
Can we get WTF STD on recurve balance board vs WTF on non recurve balance with GT/S with 3 inch tilt from shaping app vs WTF on GT Before 6109 update using tilt app.?
thanks Team 🎉
Did you even reference the Gravity Recovery And Climate Experiment (GRACE) data or the gravity map. Sloppy work at best.
Totally forgot, I'll add this to our list for the next video where we turn this dead horse into hamburger.
Do not operate heavy equipment while watching this... damn wheres the lunch sessions, or Bodhi or Jeff!
Bodhi is at FM. 🤷♂
I just want to level my chrome WTF's on my GT😢
GTV is really the only option currently
Industrialización expects a certain level of precission. If not... Why this gigantosauric inflation?
Wait so the GTV rails are actually worse?😂
we forgive you Robert
Reno 911?
Its not science unless a bowtie
Why could we just see a non scientific test up and down some trails. Either its a fun board to ride or its not. Also future motion 100 percent stol....inspired by floatlife rail designs.
Slightly lower clearance is actually more fun to ride because it's more stable, until you catch your nose where you weren't expecting. So we did a trail test, where we found it caught the nose a little easier than a stock board, and then we did this scientific test to figure out that 1 degree nose up would perfectly fix the issue.
I didn't watch the whole first vid and I didn't watch this whole vid. It was clear to me nothing in the first vid was highly scientific or precise which is fine with me. I would rather entertainment over engineerding.
Just release a Float Life VESC already.
yeah this might need to be done again, the plate sets a higher level so when you drop the front of the board it is not on the plate level so 14º would not be correct.
Yep, because there is no tire. The plate raises the center of the rail up to where it would normally be with a tire on it. With this setup, we eliminate all the tire variables, like psi, roundness, and rolling side to side.
Maybe he rides without a tire🤷🏻♂️
Thank you for your bravery in such a dark moment 🫡 🫡 🫡 🫡 🫡 🫡