Finally, a correct video showing the full transmission service and not like all the other half-ass videos that only show the transmission oil being changed,, which does not get the other 2 liters of oil out of the torque converter. This video ALSO shows how to access the torque converter drain plug and how to replace the remaining ATF OIL. THANK YOU!!!!
Im always amazed how a group of top notch engineers could not come up with a more convenient and easier way to change this fluid. My 1960’s chevy Nova has a drain plug on the transmission pan and you fill the fluid through the dip stick pipe. Changing the fluid take a wrench and a funnel. Good job though, cant believe you had to drill a hole to be able to access the torque converter dran plug.
Wow, 1960’s Chevy Nova! That’s amazing! Thanks for your compliment! And yeah, the top notch engineers make our life convenient, comfortable, but make our work difficult...even we have to makeup their mistakes of design 😂😂
They don't want you to change the fluid at all, they are expecting you to change the car when the "lifetime" of the car is up, namely when your warranty is over.
Wow! so organized and methodical... really makes you wanna do this job. The best part is removing the business suit and putting work clothes on. Don't underestimate anybody.
This video is far above all other instructional, do - it - yourself videos i’ve watched.Thank you for all the work that you put into this video. I believe this will ensure a successful procedure on my E350.
I have probably watched every single video on RUclips regarding 722.9 transmission service…. This video is by far the best one with all the attention to details and no other unnecessary BS. Thank you sir making this awesome video and sharing. This makes the job a piece of cake. Thank you again.
I'm so appreciative of all the great videos on this job, & this is one of the best! Even using WIS as unquestionable confirmation in between steps. Nice artistic approach to editing. Thank you! People like me can easily maintain their Mercedes thanks to people like you.
Absolutely best video! I have also tried this at home and there is an extra procedure if you have the START/STOP function of removing the auxiliary pump. Also, for me, I had a hard time on replacing the pan gasket first time as the pan gasket easily gets twisted and leaks fluid once you fill-up the fluid so had to do all over again. For those doing first time transmission fluid changes, please be careful when attaching pan gasket!
Clean, detailed and accurate video, especially the 4Nm and then the 180 degrees. You did it all right! No mistake. But, there is room for improvement if it is okay to accept a suggestion. By the way, when you drill on any metal in the future, put a magnet about a centimeter distance next to drilling so it can catch all the filings regardless if you'll use a magnetic sweeper later or not. The improvement is next time let the car do the complete flush for you by placing a tubing on the exit line of the 722.9 while the engine is running. At the same time keep adding new fluid. It is located on the side of the 722.9 close to its front. Look at the side of the transmission (of the passenger side) and you'll also need two new rubber seals to replace them after you are done. It's impressive how organized you are. Every tool has a home!
I appreciate your compliment. The magnet to collect the metal debris is a good idea, I'll try it next time for drilling steel or iron. Just the shell of the TC bell is aluminum. To flush out the transmission and the torque converter is the process to replace the ATF w/o replace the filter. I listed the guiding document at the end of the page www.leighsr.com/atf-change-7229. Thanks again for your comment and I'll happy to discuss it at the www.leighsr.com/forum/ben-chi-lun-tan-mercedes-benz-forum/about-7g-atf-change
@@LeighSr Thank you for posting the PDF documents. They are all helpful. The document named "Flush out automatic transmission and torque converter" is what I was referring to. What I called exit line is the number 2 feed line. That is the proper term I should use. In your document it says to clean the vicinity of the line to prevent any contamination. Thank you again for the documents.
You only need to remove the oil cooler or return line if you are trying to do a complete flush. Dealers don’t even do TC when they charge you 650 for it. What is did was per MB bulletin/manual. Doing a complete flush is over kill.
Let me just say CRAZY!!!! A Pressed White Shirt!!!! Absolutely insane, my wife would never allow it!! Oh Yeah, Excellent Work in that Beautiful Garage !
In keeping your video relevant, let me first start by saying Thank You! For giving us a thorough understanding of what it takes to change our transmission fluid and filter. I would only like to provide an update on my own experience with my 2012 E550 4.7 liter twin turbo transmission fluid change as it appears to be different insofar as the torque converter. I approached my local Mercedes Benz dealer here in Florida who explained they would not change the fluid within the torque converter and would charge close to 400 USD which included fluid and filter. The torque converter bolt could be found just in front of the transmission pan which was similar to your experience however it was located in a flat area and not in the bell housing (I was ready to drill out the bell housing but the engineers seemed to make some much needed improvements in accessing the torque converter bolt/plug) the other difference was that my crank shaft bolt was a 27mm socket. After finding the bolt after turning the crank, Ioosened the 4mm Allen bolt but literally nothing came out but a few drizzles. Luckily it did have the distinctive smell of transmission fluid or I would have thought I opened different bolt. I changed the fluid when the vehicle was cold, and my question was should I have ran the vehicle to warm it to operating temperature in order for the torque convertor to yeild more fluid? I would think that being cold would be ideal.
Thank you. The main reason for the trickle is because there is no air vent, also the the drain hole is too small, you might open the transmission’s plug to drain the ATF at the same time.
@@LeighSr Amazing what a resource it is. You were my inspiration to tackle my E550 as it has the new blue fluid and it has the A85 option (not sure what thay means but FCP said it was one of the lowest viscosity fluids and has a few special additives). I changed the transmission fluid regularly on my 97 C230 and my 2010 GL450 and used Valvolines MaxLife Full synthetic. I was able to get about 2-3 liters out of those torque converters (real slow drip as you mentioned but steady). The only thing I did differently was a tried to drain the converter first versus having the pan off when draining the older vehicles (the 97 has the 722.6 and the GL has the 722 9). Perhaps not removing the pan creates more of a vacuum (??).
Great video thanks. I have gle 350 but the torque converter drain is at an angle even with small drilling hard to reach so what I did instead I flushed using return transmission line which in my case is on the passenger side of the transmission. Just remove one screw and pull out the return line. After that I connected with a pipe drain in a graduated jug I used the empty ATF fluid 1 gallon as it already has the marking. I started the engine till I get 2 lit out and the pumped 2 lit in. Repeated the process till the fluid has same color as new. It took 13 lit to completely flush and fill to the over flow mark at 45 Celsius.. this video helped. So I think return fluid line of flush is better as every drop of fluid is flushed and no need for drilling also not just draining torque and transmission pan will not allow fluid in pipe , cooler and valve body to clear. Only flush through return line will remove every drop . Some might need more fluid based on how dirty the transmission is.. thank you
Thank you and Flushing is ok, but I still recommend replacing the ATF filter and cleaning the oil pan. You can see there is too much sludge on the bottom of the oil pan in the video.
Excellent video. I would drain and remove the pan along with the filter before draining the torque converter. Removing the filter will allow air to get into the torque converter so it comes out as a steady stream. I also introduce about 7 psi air into the filter pick up tube using the CTA-7650 adapter to get more fluid out. The TC should yield around 2 liters.
Well done "go through video". That converter plug screw, is the same one I have on my 7g tronic+. You have to adjust the transmission housing to reach it. Unlike others I've seen on RUclips, thier converter screw plug comes straight off, I don't know why Mercedes did that.
Did the engine Air filter today guys as per Senior Leigh , I was very careful not to brake connector for sensor and clamp came off easier than expected job went well and I am pleased. I will attempt a transmission oil change just waiting on MB scanner to monitor oil temperature.
This is an amazing video. Looks like watching a film. I have a 2013 Mercedes E400 Hybrid, which is also a W212. Will this process, particularly drilling the hole to access the torque converter's drain bolt, still applies ?
Thank you 🙏, and due to same chassis and year, that’d quite possibly, but I'm not sure. If the drain plug of the torque converter bell is aligned with the access hole, that’s very good, otherwise you have to drill a hole.
Senior Leigh, great video as always. May I ask a gew questions. Firstly, where did you get the part that screws into the atf drain pan that you used to put atf fluid in? Did the hdx sprayer come with the clear hose? Secondly, where can I get the items you used to plug into OBD II port as well as the diagnostic program? thirdly, did you buy all the ATF stuff as a kit or piece seperately? I will be doing my 14 E350 in 2100 miles so I want to be ready. I bought this car right after I started watching your videos and felt that I can do my own service thanks to you. You are a great asset to Mercedes Benz owners!!
Thank you and I list the answers below: 1, For the MB 722.9 ATF filler adapter: amzn.to/3ge9lAt For the tubing, No, that is bought separate, it's regular 3/8" PVC tubing, you might buy it from Home Depot or Lowe's; 2, MB star SD connect C4, I bought it from here: @t, You might use an IR thermometer to test the temperature of the oil pan instead, but that's not accurate. I suggest every MB DIYer has a MB Diagnostics; 3, I used to purchase twice the material of ATF replacing, one is separating, one is kit. It's up to you. Just get them all if you buy separately. Yes, you can do it. Keep a Mercedes is not a high-cost thing. Again, I appreciate your compliment!
Senior Leigh. At 17:00 into your video you are pumping in the ATF fluid. I am curious if there is pressure building up in the transmission fluid chamber or did you do something to allow the air to come out as the fluid was pumped in?
Nice how-to video. One question, i have the W204 2008 with 722.9, how do i know if i need the red fluid or the blue fluid? They are not compatible. I want to change the fluid but don't know which one to order. Thanks
Thank you, and I do not have the transmission 725.0, but I may pull out the original documents of replacing 725.0 ATF from WIS, and post them on leighsr.com I'll let you know once I finishing the post. Or you might subscribe to leighsr.com, in order to receive the news from there.
Hi Senior Leigh, it's a great easy to understand step-by-step video. Thanks for sharing. And a question for you if you don 't mind? When the pan is bolted back up, and the initial 9 litres have been pumped into the trans,. At this point you start the engine and shift through "R" "P" and "D", repeatedly, with the engine running all the time. Then when the temp reaches 45c, check if there is fluid running back down the input pipe. If not, you pump a little bit more in, then wait until it start's to run back down the pipe. ( all the time at 45c) When it slows to a trickle, remove the input pipe, and replace the drain stud, And all this time, you will have the engine running? Thanks again, Jim.
Thank you, and yes, the engine must be running when you checking and correct the level of ATF. I have published a video regarding checking the ATF level of 722.9. ruclips.net/video/hE9Ss8DsA0M/видео.html
Thanks so Much SL! I only have a couple of questions 1) how do i figure out which transmission i have? i have a 2010 ml350. 2) Would i be able to use these instructions on my car? Thanks again
My pleasure. For the question: 1) you might find the most answer on www.leighsr.com/atf-change-7229 2) yes, that's pretty the same, you may use these instructions.
@@LeighSr Thank you Senior Leigh. I have been reading a lot of those. I also found out about lastvin dot com. so i looked up my vin and realized i had the 77290 02 524669 I guess that's the similar to yours. I also followed your recommendation of red fluid, 236.14. so i called the dealer to confirm this too.
Hello and amazing video. Question: Do I have to have the MB star SD connect C4? Can I just run the car for a certain amount of time? Can you share how mow many minutes you run the car while waiting for temp to rise? The MB star SD connect C4 is very pricey.
Thank you, and yes you might measure the temperature of the ATF oil pan with an IR thermometer instead of the MB Star. The downside is not accurate, that may lead to the capacity of ATF is not accurate. For waiting time, maybe 10 mins. In conclusion, I strongly recommend buying an MB star, that may worth two times of maintenance at the dealer workshop.
@@geo5954 Recently I found an instead solution, iCarsoft MBII for Mercedes Benz amzn.to/2SbcYMR this device can do most diagnoses job, include the temperature of the transmission fluid.
Finally, a correct video showing the full transmission service and not like all the other half-ass videos that only show the transmission oil being changed,, which does not get the other 2 liters of oil out of the torque converter. This video ALSO shows how to access the torque converter drain plug and how to replace the remaining ATF OIL. THANK YOU!!!!
Im always amazed how a group of top notch engineers could not come up with a more convenient and easier way to change this fluid. My 1960’s chevy Nova has a drain plug on the transmission pan and you fill the fluid through the dip stick pipe. Changing the fluid take a wrench and a funnel. Good job though, cant believe you had to drill a hole to be able to access the torque converter dran plug.
Wow, 1960’s Chevy Nova! That’s amazing!
Thanks for your compliment!
And yeah, the top notch engineers make our life convenient, comfortable, but make our work difficult...even we have to makeup their mistakes of design 😂😂
The complexity is the point :-)
They don't want you to change the fluid at all, they are expecting you to change the car when the "lifetime" of the car is up, namely when your warranty is over.
By far this is the Best transmission change, so thankful!!
Wow! so organized and methodical... really makes you wanna do this job. The best part is removing the business suit and putting work clothes on. Don't underestimate anybody.
头一回看到华人做的换奔驰变速箱油的视频。太棒了，比老外视频做的漂亮还实用详细。为你骄傲！
This video is far above all other instructional, do - it - yourself videos i’ve watched.Thank you for all the work that you put into this video. I believe this will ensure a successful procedure on my E350.
非常精美的一个视频，光线，细节，摄像头的角度都很完美，仔细一看居然还是国人的作品，hats off.
I have probably watched every single video on RUclips regarding 722.9 transmission service…. This video is by far the best one with all the attention to details and no other unnecessary BS.
Thank you sir making this awesome video and sharing. This makes the job a piece of cake. Thank you again.
Made a messy transmission maintenance video into an elegant instructional masterpiece! Thank you!
The best manual, I have ever seen! Thank You
I'm so appreciative of all the great videos on this job, & this is one of the best! Even using WIS as unquestionable confirmation in between steps. Nice artistic approach to editing. Thank you! People like me can easily maintain their Mercedes thanks to people like you.
Best oil change video ever made. no drama only work .
That video is just perfect. No mistakes, just perfect! Thanks!!
This was not only super informative but also immensely satisfying to watch. Bravo!
Hello Senior Leigh! I love your videos, thank you for producing such professional quality work.
Thank you for allowing us to maintain our Mercedes effectively, your videos are superb
This guy knows what he is doing 👍
Absolutely best video! I have also tried this at home and there is an extra procedure if you have the START/STOP function of removing the auxiliary pump. Also, for me, I had a hard time on replacing the pan gasket first time as the pan gasket easily gets twisted and leaks fluid once you fill-up the fluid so had to do all over again. For those doing first time transmission fluid changes, please be careful when attaching pan gasket!
Thank you and yes, I use to experienced the ATF leaking due to the gasket moving. Double check even triple check the gasket before install.
can you please elaborate on that extra procedure if you have the start/stop function? thanks
Just did this service on my car. Your video was a fantastic resource! Thank you very much for putting so much work into it!
EXCELLENT VIDEO and THANKS SO MUCH for posting this!! I'm fully confident that I can do this myself now!!
Thank you very much for all the great videos on Mercedes M276 emgine as well as 722.9 trans. Very good work, thanks!!
Master is master, no need to say a word but very easy to follow it. Great video.
Clean, detailed and accurate video, especially the 4Nm and then the 180 degrees. You did it all right! No mistake. But, there is room for improvement if it is okay to accept a suggestion. By the way, when you drill on any metal in the future, put a magnet about a centimeter distance next to drilling so it can catch all the filings regardless if you'll use a magnetic sweeper later or not. The improvement is next time let the car do the complete flush for you by placing a tubing on the exit line of the 722.9 while the engine is running. At the same time keep adding new fluid. It is located on the side of the 722.9 close to its front. Look at the side of the transmission (of the passenger side) and you'll also need two new rubber seals to replace them after you are done. It's impressive how organized you are. Every tool has a home!
I appreciate your compliment. The magnet to collect the metal debris is a good idea, I'll try it next time for drilling steel or iron. Just the shell of the TC bell is aluminum. To flush out the transmission and the torque converter is the process to replace the ATF w/o replace the filter. I listed the guiding document at the end of the page www.leighsr.com/atf-change-7229. Thanks again for your comment and I'll happy to discuss it at the www.leighsr.com/forum/ben-chi-lun-tan-mercedes-benz-forum/about-7g-atf-change
@@LeighSr Thank you for posting the PDF documents. They are all helpful. The document named "Flush out automatic transmission and torque converter" is what I was referring to. What I called exit line is the number 2 feed line. That is the proper term I should use. In your document it says to clean the vicinity of the line to prevent any contamination. Thank you again for the documents.
You only need to remove the oil cooler or return line if you are trying to do a complete flush. Dealers don’t even do TC when they charge you 650 for it. What is did was per MB bulletin/manual. Doing a complete flush is over kill.
Thank you for inspiring the confidence needed to complete these tasks!! Excellent instruction!
Also did engine oil and filter change was very simple as well these vides and procedures are excellent guide lines to follow.
大赞老李！如果装上举升机，您的爱好能发挥的更好。我的车库也有了眉目了，下一步也要跟着您的脚步自己动手。
HiFiyong 谢谢您的关注！举升机曾是我第一考虑的设备，奈何车库的高度限制了举升机的作用，所以就暂时放弃了。
By far the BEST video I've seen. Very professional and clean In very details. Now I can do it on my own without a lift. Thank you
Your videos are the finest. At last someone methodical and precise like me. Congratulations and thank you very much :-)
Best of the best DIYer explanation hands down man 🎉
Eagerly waiting for more Mercedes Benz videos Senior Leigh… I hope you are enjoying great health and thank you for sharing so much so far with us🙏🏼
Thank you 🙏, I will, and I will be back ❤️
This was incredible! Thank you!
今天刚换完，换之前我还祈祷我的torque converter的放油螺丝不会在那么变态的角度，结果没办法我也和你一样钻了个洞。diy还真是要有创意，如果不是看了你的视频我是怎么也不会想到钻洞这个办法
我就是一根筋，不达目的不罢休😄……钻眼之前我还试过锯短六角扳手，结果试了几次都不行，后来想即使拧下来，那么小的空间也拿不出来，还要上扭力扳手……折腾了一小时，最后一招就是钻开😄
Senior Leigh 我也是被那个螺丝折腾很久，主要是拧不开，把螺丝都给拧坏了。后来用heat gun加热了下螺丝才拧下来。也惊讶于torque converter里居然有那么多油，感觉一半的油都在torque converter里
@@Xavier-pk3yx 奔驰的维修手册里说，里面有4升油。
Let me just say CRAZY!!!! A Pressed White Shirt!!!! Absolutely insane, my wife would never allow it!! Oh Yeah, Excellent Work in that Beautiful Garage !
Such an art! I felt like watching the longer version of "The Transporter's mechanic"
Osu!
Outstanding, very clean, clear and professional. THANK YOU, you saved me $100’S
Thanks. This was exactly what I was looking for. Well done!
In keeping your video relevant, let me first start by saying Thank You! For giving us a thorough understanding of what it takes to change our transmission fluid and filter. I would only like to provide an update on my own experience with my 2012 E550 4.7 liter twin turbo transmission fluid change as it appears to be different insofar as the torque converter. I approached my local Mercedes Benz dealer here in Florida who explained they would not change the fluid within the torque converter and would charge close to 400 USD which included fluid and filter. The torque converter bolt could be found just in front of the transmission pan which was similar to your experience however it was located in a flat area and not in the bell housing (I was ready to drill out the bell housing but the engineers seemed to make some much needed improvements in accessing the torque converter bolt/plug) the other difference was that my crank shaft bolt was a 27mm socket. After finding the bolt after turning the crank, Ioosened the 4mm Allen bolt but literally nothing came out but a few drizzles. Luckily it did have the distinctive smell of transmission fluid or I would have thought I opened different bolt. I changed the fluid when the vehicle was cold, and my question was should I have ran the vehicle to warm it to operating temperature in order for the torque convertor to yeild more fluid? I would think that being cold would be ideal.
Thank you.
The main reason for the trickle is because there is no air vent, also the the drain hole is too small, you might open the transmission’s plug to drain the ATF at the same time.
I made a webpage for more details about change ATF, www.leighsr.com/atf-change-7229
@@LeighSr Amazing what a resource it is. You were my inspiration to tackle my E550 as it has the new blue fluid and it has the A85 option (not sure what thay means but FCP said it was one of the lowest viscosity fluids and has a few special additives). I changed the transmission fluid regularly on my 97 C230 and my 2010 GL450 and used Valvolines MaxLife Full synthetic. I was able to get about 2-3 liters out of those torque converters (real slow drip as you mentioned but steady). The only thing I did differently was a tried to drain the converter first versus having the pan off when draining the older vehicles (the 97 has the 722.6 and the GL has the 722
9). Perhaps not removing the pan creates more of a vacuum (??).
Great and very clean work stemming from great experience. Well done. May God bless your work.
I was taken aback by the HD Hudson sprayer, clever.
👍
Un tutorial excelente, como otros que he podido ver en tu canal. Todo un profesional, pulcro y elegante. Mucha gracias por tu contenido. Un saludo
Thx for the perfect explain I appreciate what have you done
Good service
Great video thanks. I have gle 350 but the torque converter drain is at an angle even with small drilling hard to reach so what I did instead I flushed using return transmission line which in my case is on the passenger side of the transmission. Just remove one screw and pull out the return line. After that I connected with a pipe drain in a graduated jug I used the empty ATF fluid 1 gallon as it already has the marking. I started the engine till I get 2 lit out and the pumped 2 lit in. Repeated the process till the fluid has same color as new. It took 13 lit to completely flush and fill to the over flow mark at 45 Celsius.. this video helped. So I think return fluid line of flush is better as every drop of fluid is flushed and no need for drilling also not just draining torque and transmission pan will not allow fluid in pipe , cooler and valve body to clear. Only flush through return line will remove every drop . Some might need more fluid based on how dirty the transmission is.. thank you
Thank you and Flushing is ok, but I still recommend replacing the ATF filter and cleaning the oil pan. You can see there is too much sludge on the bottom of the oil pan in the video.
Excellent video. I would drain and remove the pan along with the filter before draining the torque converter. Removing the filter will allow air to get into the torque converter so it comes out as a steady stream. I also introduce about 7 psi air into the filter pick up tube using the CTA-7650 adapter to get more fluid out. The TC should yield around 2 liters.
第一次评论，真的非常专业🎉
Very nice video and great details for the whole process. Thank you for your effort.
Really clear and step by step video.
The best I wached.
Many thanks 👍
But if you don't have tc drain plug, you need a full flush 😮
professional job done at home, amazing!
Well done "go through video". That converter plug screw, is the same one I have on my 7g tronic+. You have to adjust the transmission housing to reach it. Unlike others I've seen on RUclips, thier converter screw plug comes straight off, I don't know why Mercedes did that.
Also, salute to you sir for doing transmission service well dressed 😎
👏🏽 👏🏽 👏🏽
I can’t believe pulled that job off in that nice white polo :)
Great Video!
And by the way. Love the video. THIS IS THE CORRECT WAY TO CHANGE OIL!!!
Wow. Sehr gut. Danke für das Video.
Many thanks for entertaining us, with this awesome videos.... I hope you will have a G class in the future.
Keep up the excellent work Sir!!!
Great video, a lot of specific information. Very useful!
Ryszard Peja thank you and more detail on leighsr.com
Did my brakes thanks to senior leigh car brakes feels and drives excellent 2012 Mercedes E300.
Did the engine Air filter today guys as per Senior Leigh , I was very careful not to brake connector for sensor and clamp came off easier than expected job went well and I am pleased. I will attempt a transmission oil change just waiting on MB scanner to monitor oil temperature.
I’ll be doing this tomorrow on my W212. Wish me luck🐼
Excellent video as always.
用Home Depot喷药的水壶来注油，太有创意了！
就是个手动泵的作用，不想花100多块钱买专用的，其实作用一样。这个才10块钱。
我家里的手动抽油机应该也是可以的，用之前要好好清洁一遍。请问李大师，我没有专门的读码器，油温监测准备用红外测温枪对准油盘测温问题应该不大吧？大师的视频做的太精细了，作品数量上不去也是订阅量少的原因，总要有取舍，宁可作品少也不能降低质量。
Mission Accomplished. Thanks 👍🏼
What an absolutely brilliant video, very informative
Hello what size tubing did you use to connect the hand pump and adapter
3/8“
Congratulation
Are the mechanic service pages shown available to print out ?????
Yes
perfect master
Awesome! 👍👍
The besttt. You are number one!!
Top video, very good!
Amazing work!
i love your video! thank you
Great Video Sir!!
This is an amazing video. Looks like watching a film.
I have a 2013 Mercedes E400 Hybrid, which is also a W212. Will this process, particularly drilling the hole to access the torque converter's drain bolt, still applies ?
Thank you 🙏, and due to same chassis and year, that’d quite possibly, but I'm not sure. If the drain plug of the torque converter bell is aligned with the access hole, that’s very good, otherwise you have to drill a hole.
Excellent detailed video thank you.
you are the best
Senior Leigh, great video as always. May I ask a gew questions. Firstly, where did you get the part that screws into the atf drain pan that you used to put atf fluid in? Did the hdx sprayer come with the clear hose? Secondly, where can I get the items you used to plug into OBD II port as well as the diagnostic program? thirdly, did you buy all the ATF stuff as a kit or piece seperately? I will be doing my 14 E350 in 2100 miles so I want to be ready. I bought this car right after I started watching your videos and felt that I can do my own service thanks to you. You are a great asset to Mercedes Benz owners!!
Thank you and I list the answers below:
1, For the MB 722.9 ATF filler adapter: amzn.to/3ge9lAt
For the tubing, No, that is bought separate, it's regular 3/8" PVC tubing, you might buy it from Home Depot or Lowe's;
2, MB star SD connect C4, I bought it from here: @t, You might use an IR thermometer to test the temperature of the oil pan instead, but that's not accurate. I suggest every MB DIYer has a MB Diagnostics;
3, I used to purchase twice the material of ATF replacing, one is separating, one is kit. It's up to you. Just get them all if you buy separately.
Yes, you can do it. Keep a Mercedes is not a high-cost thing.
Again, I appreciate your compliment!
Thank you for this
Wow this guy make great videos
Great video sir
why are you letting the fluid drain during the fill process? how do you know the correct level of it? Thanks for posting the video!
Most details on www.leighsr.com/atf-change-7229
That’s can answer your question.
This post is a diamond among garbages. 5stars
Amazing very clean car.
Clean work 👍🏾
Senior Leigh. At 17:00 into your video you are pumping in the ATF fluid. I am curious if there is pressure building up in the transmission fluid chamber or did you do something to allow the air to come out as the fluid was pumped in?
There is a vent valve on the top of the transmission case to balance the pressure. See the picture of the 722.9 on www.leighsr.com/722-9
You are awesome! Thanks a lot
Nice how-to video. One question, i have the W204 2008 with 722.9, how do i know if i need the red fluid or the blue fluid? They are not compatible. I want to change the fluid but don't know which one to order. Thanks
Thank you and here has the answer for your question www.leighsr.com/atf-change-7229
@@LeighSr Thanks, that was helpful, now i know that i need the red one.
you are amazing!
Dear sir, you have made a beautiful video, so clear, so clear. Is it possible to make the same video for transmission 725.0 as well?
Already bednakt!
Thank you, and I do not have the transmission 725.0, but I may pull out the original documents of replacing 725.0 ATF from WIS, and post them on leighsr.com I'll let you know once I finishing the post. Or you might subscribe to leighsr.com, in order to receive the news from there.
老大哥 能不能 教學一下 換 引擎腳以及變速箱腳 我的車也是w212 e350^^
蔡先生，您好！目前我的车不需要换引擎腳以及變速箱腳，如果您需要相关的指导，我可以把相关的指导手册贴到我的网站 leighsr.com 这些手册是我每次操作的主要参照文件。
beautiful work
Hi Senior Leigh, it's a great easy to understand step-by-step video. Thanks for sharing. And a question for you if you don 't mind? When the pan is bolted back up, and the initial 9 litres have been pumped into the trans,. At this point you start the engine and shift through "R" "P" and "D", repeatedly, with the engine running all the time. Then when the temp reaches 45c, check if there is fluid running back down the input pipe. If not, you pump a little bit more in, then wait until it start's to run back down the pipe. ( all the time at 45c) When it slows to a trickle, remove the input pipe, and replace the drain stud, And all this time, you will have the engine running?
Thanks again, Jim.
Thank you, and yes, the engine must be running when you checking and correct the level of ATF. I have published a video regarding checking the ATF level of 722.9. ruclips.net/video/hE9Ss8DsA0M/видео.html
Excellent!!!
Great video!
Excellent video, I have shared this.
Thanks so Much SL! I only have a couple of questions
1) how do i figure out which transmission i have? i have a 2010 ml350.
2) Would i be able to use these instructions on my car?
Thanks again
My pleasure.
For the question:
1) you might find the most answer on www.leighsr.com/atf-change-7229
2) yes, that's pretty the same, you may use these instructions.
@@LeighSr Thank you Senior Leigh. I have been reading a lot of those.
I also found out about lastvin dot com. so i looked up my vin and realized i had the 77290 02 524669
I guess that's the similar to yours. I also followed your recommendation of red fluid, 236.14. so i called the dealer to confirm this too.
@@chiefs5822 The red or blue ATF is divided by 6/18/2010 when your MB manufactured.
The best video without words hands down....I know the stealership hates this guy 😆 🤣
艺术之旅💯💯💯
Hello and amazing video.
Question: Do I have to have the MB star SD connect C4? Can I just run the car for a certain amount of time?
Can you share how mow many minutes you run the car while waiting for temp to rise?
The MB star SD connect C4 is very pricey.
Thank you, and yes you might measure the temperature of the ATF oil pan with an IR thermometer instead of the MB Star. The downside is not accurate, that may lead to the capacity of ATF is not accurate. For waiting time, maybe 10 mins.
In conclusion, I strongly recommend buying an MB star, that may worth two times of maintenance at the dealer workshop.
@@LeighSr thank you very much
@@geo5954 Recently I found an instead solution, iCarsoft MBII for Mercedes Benz amzn.to/2SbcYMR this device can do most diagnoses job, include the temperature of the transmission fluid.
@@LeighSr thank you good sir. Very much for coming back to share:)
Good work
Children playing is the best background music ever.
a good excellent job
我的x164也是722.9，老李车间有没有换atf的业务？
谢谢您的信任❤️
只是我只有个车库，不能算车间。😄
我在南加州，如果您有兴趣一起拍视频，我是很欢迎的。
@@LeighSr 换atf的东西早就基本买齐了，除了那个诊断电脑。看您举重若轻，但我一直没敢动手。我离你应该不远，微信联系？
@@windfoil3765 在这边就不用微信了，您到脸书搜senior leigh，我们可以messanger联系。