Mercedes 7G Tronic Plus - Oil change. Detailed guide (w204).
HTML-код
- Опубликовано: 24 ноя 2024
- If you find the video useful, please consider supporting me with only 1% of what you spared with this job at a coffee price: ko-fi.com/tick.... Thank you :-)
WARNING: I'm not responsible for any damage. This is a complex procedure and has to be done by qualified technicians. If you aren't sure about it, don't do it.
Before working under the vehicle support it safely with jackstands and ramps.
To be sure that the car is level, I used a long level (about 1.2 m) and I put it between the two side lifting points.
I used FUCHS ATF7134 FE (spec MB 236.15) oil. You have to buy 10 litres to drain the TC, if you replace the oil only in the sump, 6-7 litres are enough.
You need a torque wrench in the range 4-22 Nm. Tools required are minimal.
I used a Meyle kit for oil filter, screws, gasket and overflow pipe: Meyle 014 137 1107.
Good luck and PLEASE SUBSCRIBE TO SUPPORT MY JOB :-)
This is the video showing the most accurate and correct method. Most people and most mechanics skip draining the fluid in the torque convertor - wrong.
Thank you very much. Good luck 🙂
@@ticktime6569 so basicly the fluid drains until the level is correct whether the car is on or off?
@@vedob5163 engine must be running
Ok thank you
@@ticktime6569 quick question, why does the engine need to be on?
It 's the ONLY right way to do oil change in 722.9. You have my Subscription.
Thank you 🙂
I was about to say the same! Yes that procedure is the very right one!
Le meilleur tuto de vidange 7Gtronic+ que j'ai pu voir. Merci
Merci!
Your videography is excellent. I appreciate your detailing every step with video and captions.
Thank you for the comment
Thank you for taking the time to record this. This is amazing! 👍👍👍
I like the warning up front. Although I am tool savy and have good mechanical skills, making an expensive mistake is why I just take her down to Mercedes three minutes from home. That, and severe lower back pain. I'm better working underneath a car on a lift. Working in the motor is very painful after only a few minutes.
In this case you made a good choice. It's not worth it, health first. Good luck
Your tutorial class was crystal clear and excellent. Thank-you.
Brilliant video.
It's the only and proper way to change oil including torque converter.
Thank you very much
Grazie man, done this to my father's 2016 V class. Greetings from your neighbour Slovenia.
Thank you. Good road 😎
I am very impressed with these very accurate educational videos. Thank you for this very review
Thanks for the comment
This video was incredibly helpful for replacing the transmission oil in my W205 C250d. Thanks for the clear instructions!,
@@arthurnam1183 thank you for your comment
very clear video with excellent visuals. well done.
Thank you for the comment
Might be a good idea to mark crank pulley for the position of the Torque Converter drain plug for ease of next service. Also, more fluid will drain if is allowed to drain overnight or good 24 hours. Excellent video.
Thank you and good luck
Hello! Like your video very much. At 23 minutes and 20 seconds of the video, you screwed six screws to 4NM, and then performed the now the second stage work. Whether to turn the screw another half turn or 180 degrees. Is my understanding correct? Thanks!
Hi, yes. First stage is torque to 4Nm all the screws. Then the second step is do another 180° on the screws. Good luck
That's amazing video . Thanks for your time . U did amazing job
@@Safpivi thank you
Hello Sir, really
an amazing tutorial! I checked few others and I will follow this one 4 sure! I just dont get it why MB wants to drain 1l of
new oil away... Would you reuse that oil in your scenario (in future) ? Thank you, Br
Hello and thank you. This is a good question, honestly I don't know. But I wouldn't use an oil that is mixed with old residues. Good luck
I would have thought you'd change the O ring's on the two pipes from the Electric auxiliary pump....., very critical , just as crucial as the the new plug on TC...
@@attilato2445 if I remember well it's not recommended on WIS.. Anyway no one does it.. Probably you should if vehicle is more than 8-10 yo. Good luck
Does the 7g tronic has red fluid? Your 7g tronic + has blue.
Very good video
Thx a lot😊
Best way to do that. Subscribed
@@michaelg8284 thank you
Great video! Exact same procedure as WIS. One question tho, for the second 4L fill that you did when trans temp reaches 45C, after you finished second fill did you turned the engine off after that fill for the fluid to cool off then bring it back to 45C to level the fluid?
i'm sorry but I don't remember. I think I was quick enough it was not necessary to turn it off
Very nice tutorial! I've ordered the oil change kit from Mayle and going to tackle this now! Which app do you use to check the oil temperature?
It's autel app, it comes with the autel ap200 OBD2. Good luck🙂
@ticktime6569. Great video, I just did it on my W204 2013 and unfortunately wasnt aware of draining the Troque Converter like you did. Probably thats why only 4.5 litres oil was drained. I followed the remainig steps as it is and pumped in 5 litre of fresh oil. You think I should re-do it and drain the TC ?. Although the old Oil was relatively clean with no sludge on the magnets or in the pan.
hi, too many variables to answer. Now new oil is mixed with old. If old oil didn't have too many miles you could repeat the partial oil change within a few miles so that a good part will be new. Good luck
One thing i dont understand is you say: “ wait for trans to reach 45 degree then pour the rest of the fluid inside (4l) .. then you say start going through the gears while the atf gets to 45degree” . So its 45 degree , you pour 4l. During time the atf temp has got lets say 50degree. How going through the gears drops the atf temp to 45 degree to do the level??
שלום יש לי CLS450 2021 הילוך רביעי חובט כמו בעיטה קלה מה עלי לעשות אני כבר עובד עצות
Добрый день.Спасибо за видео.Один вопрос!Нужно ли смазывать прокладку на поддоне масло при установке?Спасибо.
No. Good luck
Thanks!@@ticktime6569
@@ticktime6569 этот насос качает быстро? Я заменил масло,но качал большим шприцом,очень не удобно..
Thanks for the informative video, I just wanna ask, does the oil automatically fill to the TC when you fill it in the gearbox?
Yes when you turn on the engine
Thank you sharing! question: The B250, there is a port to check the transmission fluid level in the driver side which close to radiator, is it possible pour the new fluid from this port?
@@gkz871 sorry I don't know
I can’t recall how much fluid I drained out. How can I make sure I don’t over or under fill? My transmission appears to be making a strange growling sound ever since I changed the fluid. Please advise
If you follow the procedure, the right oil level is the one you obtain draining the oil at 45° and then torquing the drain plug. If nothing comes out, it's underfilled. If oil came out, you're fine. For the noise I don't know if you could have done mistakes sorry
What about the transmission cooler?
As an alternative to the not that novice diy guy/girl - would it be possible to just keep filling 6-7 atf and drive for 10-15 minutes and come back and empty and refill again and do that over until the atf is clear blue colour, just to avoid doing the TC process? Hope it makes sense :)
@@AlaGamesMobile probably but I think it's easier and faster to drain the TC
you will get more clean oil inside if you empty the converter, he managed to get almost 9 liters out of this.
Refill and drive method needs to be repeated multiple times to get it clean enough so it is quicker and cheaper to remove the pump and drain converter.
I believe you would need more than 20 liter of oil to get it almost clean blue.. :)
@@DavorMarkac you’re right 😅 but is this video applicable for a 7g Tronic plus gear? Is the location of the converter same spot?
@@AlaGamesMobile all 7g tronic plus are with blue oil, but i am not sure if all have converter screw, through VIN number you can check in epc.
Hello! Nice video, a question, when you put the 10 liters how much came out after reaching the temperature to make the level when the oil starts to drip?
On the Castrol lubricants pages, liqui moly, motul. they say it's 9 liters and on Meyle's page it says it's 10 liters. So ask him how much oil he got out.
@@nunopitaes1358 the entire transmission contains 9 liters. So you put 10, and then 1 liter comes out. Good luck
Great job bro❤ What is diagnostic application name on your phone?
Autel AP200, thank you 🙂
Hi bro, great video. How long did the process take in total?
@@moker071 hard to say, diy is a big job
@@ticktime6569 You reacting quickly 😊. I have a lift rented for 3 hours. I am thinking this might be not long enough. But it also could be enough. No idea.
@moker071 if you know what you do could be enough but on the limit. Good luck
Today I have done it. It took me exactly 2,5 hours including torque converter. Draining the torque converter is really slow. You can speed up te process by using a small hose in the beginning until it flows harder. Another tip is to have a person with you to check the torque converter plug since you have to crank it from the top of the car.
@moker071 great job
Hello, thanks for your video, perfectly detailed showed 👍🏻
thank you for your comment, good luck
Great job, man! thanks a lot for this video!
thank you
I added just over 9litres and just removed a little bit at the end not a one litre. It shouldn’t have too much oil! It was at the temperature so all instructions followed carefully. Only a bit came off during the levelling process. Should I be worried?
You should be fine, but if you have serious doubts please ask a technician near you. Anyway AT contains 9 liters in total. Good luck
What if the gear changes appears to be too hard and not smooth? After this service.
Thank you very much for this well explained video.
Thank you good luck🙂
Top class man ,well explained video
Thank you and good luck
i did the job but it's leaking from the front passenger side corner where the electric connector plug is, what could be the cause ? the gasket seems to be seated properly and the surface was clean
Did you replace the pan bolts with new ones?
@@ticktime6569 yes all new bolts but maybe i know where the issue is , i lubricated the rubber gasket side mating to the transmission maybe that's the issue
@@mac2k2020 probably
Si eu am aceasi problema, garnitura noua suruburile stranse, dar curge nu inteleg cauza
POSIBIL PE LA MUFA ACEEA??
thanks dude!! just one question, how to find the adapter to fill the gearbox? any part number? thanks man, you help me a lot.
Hi, you have to search for a 722.9 Mercedes gearbox adapter. With the pump you buy, it comes a kit for various brands. Good luck 🙂
Thankyou for the video
Great Job!
Hello everyone !
My mechanic put wrong oil trasmission on my c300 2012 . He put red one 236.14
But the car need 236.15 blue one. I have made 14k km , what should i do . Could i have problem if i change now with blue one or should i keep red one
Hello, my advice is to come back to your mechanic and claim to do the job again with 236.15 oil. Transmission could have some damages but if you act soon you'll save it. Good luck
I have same your problem, I booked an appointment to change blue
But I worry
Did you change the fluid to blue??
Please if you changed to blue let me know if you feel smooth gear or happens any problem
Very nice video good job 👍
Perfect video!!!
Excellent diy video...subscribed.
Thank you
Is this ok yo use a air pump to pump the oil in?
Can you tell me the code of your six screws? My English is not good, it is very difficult to check, thank you!
nemigaparts.com/it/cat_spares/epc/mercedes/1/ga/722694/25t/27/115/?chasis=20420161S
hi, I have watched your video for 4 times, which is very helpful to me. I want to know the model of these 6 screws, where did you buy them? It's the six screws with the hook on the oil pan. Thank you!
hi, I found them in the service kit with the gasket. If you don't buy the kit, you have to check the exact code for the screws and look for them online. Otherwise go to the nearest MB dealer. Good luck
Did you put back oil in the torque converter before you put the drain plug back in ? 17:03
TC fills itself with oil when you turn on the engine
Hello, good vidéo. Thanks.
Sorry for my english. I'm Belgian.
I search procedure for mercedes cla 180d 1.5cdi 109 cv automatic gearbox 7. Is it the same that this one please? If not. Have you the procedure please? Thank yiu vers much.
I'm sorry but I'm not sure about it. Yours should be a different transmission, the dual clutch version but I don't remember exactly. Good luck
@@ticktime6569 ok no problem thank you. 😉
Good evening
Perfecto Sir! Gratzie molto!
Good luck
thank you very much!
thank you , good luck mate
How may litter transmition fluid in mercedes benz c250 2012?
Thanks a lot!!💪👍
thank you very much best of all.
Thank you and good luck 🙂
thanks!👍
On what interval - km or years should be changed the oil and filters?
@@angelnedyalkov7420 5 years or 125k km
@@ticktime6569 thank you!
Is there a low gearbox oil sensor?
I don't think so, but I'm not sure
Can you remove the adapter and put on the plug after the car is off and the oil has cooled down?
You would not reach the correct oil level in that way
谢谢你的视频
祝你好运
la misurazione de llivello va fatta con il motore acceso?
Sì come da istruzioni
A question please i have an W212 E250 4matic with 218k km is it safe to change the transmission oil ?
Hi, if the car had regular maintenance yes. Otherwise it's a difficult question. I'm not a specialist in AT so I recommend asking a specialized technician .good luck
Tc spins the same speed as crankshaft
could tel‘ me the service kit with the gasket part No? thanks!
meyle 014 137 1107
From the TC how many litre oil came out ?
I don't remember
It’s the same method for 5g tronic to?
I have it on ssangyong rexton 2014
Hi, honestly I don't remember exactly I'm sorry. But you can find easily these info online in forums or youtube. Good luck🙂
Was mayle filter good ?
Yes but the car didn't do many miles so hard to tell
Very good super.
Thanks good
Thank you
yağ değişti fiş çıktı yazılımı nasıl halledilecek
Thanks for the video. I was contemplating doing it but this has completely put me off and saved my time. lol I'm good with a spanner but not this good!
Isn’t it supposed to be 6-7 litres?
Only the sump
@@ticktime6569 so if you bleed torque converter it needs more?
@@amaizingINNOVA read description
👏👏👏
Hi Guys, anyone would be able to do this job for my car, live in London
This is the renault motor 😑😮💨😒
No, this is the Om651 mercedes engine 🙂
OK thank you for the rapidity and where can i find the procedure. If it's possible. Oupsssss
@@fabricehabran5900 you should search on the Mercedes WIS, otherwise on youtube or mb forums
@@ticktime6569 👌👍👍👍thank'sssss
Wot size is the adapter for the sump wen u fill the oil ??
Your great mate I'm following
Thank you
@@ticktime6569cheers mate, any videos of repairing front ends regarding excessive inner edge wear? Things like what to look for that creates the wear?
@@kilogolfbravo9567 control arm bushings (in particular the front ones), shocks and alignment. About w204 you find on youtube videos
2:28 why is it always oil there if 4 years ago it was levelled?
Hi, you didn't understand the principle. The level must be done with engine running
@@ticktime6569 that makes sense
What make, model, and year is the car?
It s a 2012 w204 C200 CDI
W204 an 2008 cati litri de ulei intra?? Mulțumesc 🙏
Wot size is the adapter for the sump wen u fill the oil ??
I don't know, they are standard for mercedes
@@ticktime6569 i mean as in what size dose the adapter need to be so u can pump the oil in …
@@stubuchanan5129 sorry i dont remember