Highly recommend that you use the Drexel with a sanding disc on low speed to clean up your 3d prints, switch to the knife for fine details, makers need their fingers. Definitely an awesome project, gonna be fun to do my own version, good work.
that's interesting, I am learning AR and Raspberry pi but still a beginner have no clue but I find your idea very interesting. Please if you ever got to do it i would be happy to gain some of your wisdom. Thank you!!
If just using PC, Ultramon can do it but after 30 days you gotta pay. Displayfusion is free and said it's in their upcoming features (as of 2019) but I really don't wanna reinstall it just to find out for a comment, so maybe look into that lol. Then just get a WiFi display receiver and a thin lithium battery and install everything neatly in a headband. There, augmented reality that's truly wireless and not as gross looking as what Apple released lol. You might be able to cast your Android phone to it as well for p*rn OTG while you're shopping! Truly a time to be alive!
This project looks impressive. I am working on a similar one and would appreciate it if you could share the names of all the required components along with the links to where they can be purchased
Only thing is to scale it up large enough to recreate the $400,000 helmet used by F-35 pilots I love that helmet and I wish I could build a working replica and use it like a fancy Apple Vision
I really like this. Great idea. Will it work if I use my helmet visor as reflector? I'm sure I have to add hud reflective film on the visor and probably change the angle of the screen housing for it to reflect from the visor properly. Keep up the good work.
@@ropio299 Hi. This the screen I ordered. I have not started with the project yet but the screen works great. Used it with my laptop HDMI output and works great. $97.08 5%OFF | 0.4 Inch 1280(RGB)X960 LCOS Micro Display (Only Display) They should have the HDMI version. Ask for the HDMI version.
Hi, Incredibly helpful video for a helmet integrated HUD I'm working on. Could you please provide more info on the optic used? for example: a link, if the screen is curved, what it does, weather it's a collimator or reticle. Thank you! :-)
It’s the micro FLCoS from AliExpress. I don’t think it has a specific brand or model. I’ve also found it on eBay : www.ebay.com/itm/373756978527?hash=item5705a6e55f:g:rH4AAOSwLwphJxQz&amdata=enc%3AAQAHAAAAkBNTvMGobatJ9mPUKLMdsCsX7MN3yeWL7XgcFcYTTRzBsRB2zM%2FQt3qKiMVSz2g75mLO1q7%2BPlM8h9jPBE6iU4eoEYHxBCk8tiOLxBT500V1asl8AhTzEzhUN8GVSjZ%2FLio9Q7e2HQ8Sai4PkQKpDMhL06dPNYmzkQSFhzFcoo76YrvQ0adus6xwr%2BYjYmNYeQ%3D%3D%7Ctkp%3ABk9SR_bu9bGyYQ
@@ZackFreedman I would totally tell you the model and PN of this display but I can’t actually find that info and seller won’t tell me. I’ve found the working link though : www.alibaba.com/product-detail/0-24-Flcos-micro-display-960x540_62014764685.html
Are you right or left eye dominant because I have noticed while trying a similar project that using such a display on my non dominant eye causes eye strain
I’m right eye dominant but I make those for the left eye. It doesn’t cause much eye strain for me but it would be way better to use two displays. One for each eye. I could easily do that if I’ve had second display.
Hi, sorry to butt in...i have a question, would be possible to just put the display in between eyes. Would it project a centralised image? And would it cause any harm to the eyes if done so? I am really interested in this project...and am planning to do one ;)
@@luqmanulhakimzulkornain1314 too close to your face. Hold your finger up between your eyes and see how that feels after a few seconds of focusing. You're better off just making 2 like VR
Looks awesome, probably gonna make this soon as it looks like a lot of fun and could be really cool with a raspberry pi.
Highly recommend that you use the Drexel with a sanding disc on low speed to clean up your 3d prints, switch to the knife for fine details, makers need their fingers. Definitely an awesome project, gonna be fun to do my own version, good work.
I actually have a dremel tool but I’m not patient enough for it 😅
Would love to see your remix of my project. It’s always fun to see modified versions
@@ManolloMancelli plz send me parts ❤
Manolo, please give a link to where can i get this ribbon cable? I just can't find it 😕
What's your roommates power level?
Probably over 9000
It's.... 0006... Have at it
ITS OVER 9000@garnethawkins
Nice video! Btw you can get rid of the flickering by playing with camera shutter speed, in most cases
can you give a link for this micro display?
Have you found it?
Have you found it??
Our company has this kind of screen for sale at an affordable price😊
If you need, contact me😎
Did you find it? Please let me know if you find it.
Can i get the name of the display because i canto find one so cheap. And another question how you can change the screen size... By the Lens?
a.aliexpress.com/_EuiAuQp
@@ManolloMancellipage not found.
What is the focal plane of the display? Like how many meters in front does it look like?
this is exactly what i wanna know
he said it looks like stretching out your hands and holding a peice of paper. That peice of paper is the image
would it be possible to cover the whole field of view with the projection (or most of it) ?
maybe using augmented lenses in the mirror part. Think of it as a 📽️ proyector
I think I'll try to set up something similar with a raspberry pi and just use the software to mirror the image so it appears normal on the reflector
that's interesting, I am learning AR and Raspberry pi but still a beginner have no clue but I find your idea very interesting. Please if you ever got to do it i would be happy to gain some of your wisdom. Thank you!!
If just using PC, Ultramon can do it but after 30 days you gotta pay. Displayfusion is free and said it's in their upcoming features (as of 2019) but I really don't wanna reinstall it just to find out for a comment, so maybe look into that lol.
Then just get a WiFi display receiver and a thin lithium battery and install everything neatly in a headband. There, augmented reality that's truly wireless and not as gross looking as what Apple released lol. You might be able to cast your Android phone to it as well for p*rn OTG while you're shopping! Truly a time to be alive!
do you think you could link some of the components you purchased for this project?
Links got removed
Hi, our company has this micro OLED screen for sale at an affordable price
can I get a link for the other circuit board in the video which allows you to connect the HDMI cable to the small projector? cant find it.
www.aliexpress.com/item/32967486323.html
This project looks impressive. I am working on a similar one and would appreciate it if you could share the names of all the required components along with the links to where they can be purchased
Looks pretty good! I wonder what it's applications could be🧐
Only thing is to scale it up large enough to recreate the $400,000 helmet used by F-35 pilots
I love that helmet and I wish I could build a working replica and use it like a fancy Apple Vision
Hi Manolo, is there any programming required? or does it act like a standard display via the hdmi?
It’s just a display. No programming required
can you link the Patreon page for this project or the updated version of it? I would like a build in which I can connect my smartphone (sceen share).
It’s this one : www.patreon.com/posts/68149841
can you leave the link to the projector in the reply of this comment? i cant find it on aliexpress
in other words:
PLEASE GIVE ME LINK
Here you go
www.aliexpress.com/item/1005003368754176.html
@@ManolloMancelli I've seen it, but can you tell me? how do you connect it to HDMI ?
Hello, something bad happened :( , the short flex cable was damaged, how can I get it from your cable?
Is this same as monocle hu brilliant labs and how can I make one ?!
Very cool!
I did something similar but Instead of using 3D print I used a lot of strong tape and instead of HDMI device I used Android Phone.
tape fixes everything (or in your case does everything)
Can you make a vdo on how it looks?
This reminds me a lot of that one device in "Sword Art Online: Ordinal Scale"
I really like this. Great idea. Will it work if I use my helmet visor as reflector? I'm sure I have to add hud reflective film on the visor and probably change the angle of the screen housing for it to reflect from the visor properly. Keep up the good work.
Depends how much room you have inside your helmet. If the visor is really close to your head then display would poke you in the forehead when rotated
@@ManolloMancelli Thanks for the advice. I will order the screen and start this project. Thanks for the video..
@@dennis_503_gutierrez wich screen do you use for this ? Or wich one could you use? I can‘t find a fitting one.
@@ropio299 Hi. This the screen I ordered. I have not started with the project yet but the screen works great. Used it with my laptop HDMI output and works great.
$97.08 5%OFF | 0.4 Inch 1280(RGB)X960 LCOS Micro Display (Only Display)
They should have the HDMI version. Ask for the HDMI version.
does it have to be a hdmi connection or can we swap it for usb-c or blutooth?
You can use pretty much anything that connects to CVBS
do you have a circuit diagram?
How do you change the brightness of the display? It is not reflecting off of any surface due to low brightness.
You have to connect one of the colored wires to the GND pin but I don’t remember which one does that.
You can check out my posts. The brightness is adjusted by a GND and BRT ADJ pin
Hi, Incredibly helpful video for a helmet integrated HUD I'm working on.
Could you please provide more info on the optic used?
for example: a link, if the screen is curved, what it does, weather it's a collimator or reticle.
Thank you! :-)
Hi, we have this kind of micro OLED and its optics
Can I get a link as to where on Aliexpress you got the micro display please. This is awesome
Hey, what a coincidence, our company has this kind of micro OLED screen for sale at an affordable price.🤣
@@Nina-LCD-Supplywhat is it
@@MujinR-rw8uh micro OLED screen with hdmi board
Where can I buy it?
Where can I get magnified glass?? Can you give me a link?
It comes with the display
@@ManolloMancellican I please get i link to the display
@@jadenjonessubtosmolboijay3784our company has this micro OLED and its driver board on sale
So the display needs to be deconstructed a bit to fit in the 3d printed parts?
Yeah. It’s way smaller this way
@@ManolloMancelli Great project, I love it! What is the part or item number? I can only find raw displays, nothing with optics.
Hi! this is super smart! do you mind dropping the link of the hdmi board you got?
Thanks! I've used HDMI2AV. It's available pretty much everywhere
Can I get the link of micro display please?
a.aliexpress.com/_EuiAuQp
Were can i buy the micro display??? I am searching but i dont find it
Our company has this kind of screen for sale at an affordable price😊
If you need, contact me😎
that is amazing!
Please write link the tools
Can I buy one of these off of you?
Yo what's the display you used, i want to make one too
It’s the micro FLCoS from AliExpress. I don’t think it has a specific brand or model. I’ve also found it on eBay :
www.ebay.com/itm/373756978527?hash=item5705a6e55f:g:rH4AAOSwLwphJxQz&amdata=enc%3AAQAHAAAAkBNTvMGobatJ9mPUKLMdsCsX7MN3yeWL7XgcFcYTTRzBsRB2zM%2FQt3qKiMVSz2g75mLO1q7%2BPlM8h9jPBE6iU4eoEYHxBCk8tiOLxBT500V1asl8AhTzEzhUN8GVSjZ%2FLio9Q7e2HQ8Sai4PkQKpDMhL06dPNYmzkQSFhzFcoo76YrvQ0adus6xwr%2BYjYmNYeQ%3D%3D%7Ctkp%3ABk9SR_bu9bGyYQ
@@ManolloMancelliThe link’s broken. Can you just post the display and stuff’s model name?
@@ZackFreedman I would totally tell you the model and PN of this display but I can’t actually find that info and seller won’t tell me.
I’ve found the working link though :
www.alibaba.com/product-detail/0-24-Flcos-micro-display-960x540_62014764685.html
Can you send me links to find the display I tried finding it but the ones I find are all 500$
It’s this one :
www.aliexpress.com/item/1005003368754176.html
Does this come with the display and the optics? The listing looks different then what's on the vidoe
And also where can I find the converter
i need the link for the display
Hi, our company has this micro OLED screen for sale at a good price😊
someone can help me to find the piece
Hi, our company has this micro OLED and its driver board on sale
Link? I'm looking to build a system that connect to Android smartphone (screen share)
Are you right or left eye dominant because I have noticed while trying a similar project that using such a display on my non dominant eye causes eye strain
I’m right eye dominant but I make those for the left eye. It doesn’t cause much eye strain for me but it would be way better to use two displays. One for each eye. I could easily do that if I’ve had second display.
@@ManolloMancelli Thanks! keep up the good work.
Hi, sorry to butt in...i have a question, would be possible to just put the display in between eyes. Would it project a centralised image? And would it cause any harm to the eyes if done so? I am really interested in this project...and am planning to do one ;)
@@luqmanulhakimzulkornain1314 too close to your face. Hold your finger up between your eyes and see how that feels after a few seconds of focusing. You're better off just making 2 like VR
where do i get the display?
or better yet could i get a link
or even better all the products?
Our company has this micro OLED and its driver board.😊
@@Nina-LCD-Supply yo thanks
Amazing
👍
is there a way to connext this to a camera
Yes if you have camera with composite connection
why the reflector is at some angle not 90 degree
Reflections don’t work at 90 degree angle
Where can I find the 3D print files
Everything is available on my Patreon
can i buy this from you ?
Why don't you make the front glass from the reflector it self so there is no something in the middle between the glass and the display
What kind of display is that?
micro OLED screen
Can I get this pice
Its on my patreon
Vegeta
DBZ in real life
@ManolloMancelli, do you these work as a business? how can I contact you? I have a project for you if you are interested.
I'm interested (I don't have a channel) but I'm still interested!