It's actually the 3mm screwdriver from a Victorinox Cyber Tool M Swiss Army Pocket Knife. However it makes for a fantastic reset tool, that can be bought individually from Amazon - amzn.to/3x382wQ
@@lolbackup2212 You could use a WiFi extender. Possibly something like a TP-Link TL-WA850RE N300. However, this is not a recommendation as this type of technology, while cheap, just is not all that great. I found that by using this sort of WiFi extender, the technology was fine for basic internet stuff ie browsing or email. But poor for anything that required real bandwidth, like streaming, or using games consoles If you are UK based, can I suggest that you look into something called BT Whole Home Mesh WiFi. www.expertreviews.co.uk/bt/1405560/bt-whole-home-wi-fi-review-great-value-mesh-wireless While I have not yet had a chance to play with one. I have heard that they can be used to extend the WiFi on your existing router. However, being newer mesh technology they give better data speeds than the old style wifi extenders.
mydoodads I play on a gaming pc and I stream and I will go to another room that does not have a lan cable and so do I have to bring a lan cable to my room or is there i way I can do it wirelessly?
@@lolbackup2212 If the WiFi to your house does not reach the room where you are playing or streaming. You will have to either install better WIFi or using a network cable.
Did this solve the problem? I face the same issue. 125 mbps provided, 90-100 mbps reached the computer through CPL. Then, 2 years after it dropped to 30-40 mbps. Now I have a 400 mbps connexion with my new provider and still, only 30-40 reach the computer. I'll try this.
All this would do is return your TL-WPA4226 back to its defaults. This would then allow you to try and set it up again. However, many factors can effect the performance of a wireless connection. So you might be better checking for wireless interference first. Devices that will interfere with wifi include, cordless telephones, microwave ovens, bluetooth devices, Christmas tree lights and other wireless routers. If the problem only just occurred, I would suspect signal interference. So In the first instance try changing the wifi channel on your extender. You would be looking to use 1, 6 or 11. Avoid using auto. Hope this helps.
@@mydoodads i can’t change the wifi channel because I can’t connect to the amplificator, and as well only the first 2 light are on and every 5-10 seconds it restarts automatically and cuts the signal when i try to use LAN cable instead of wireless option.
You might be able to change settings on the amplified, by connecting your computer via a network cable rather than wifi. Failing that it might be worth resetting it and trying to reconfigure it
Nope. for me the TL-WPA 4220 has ON/OFF light on all the time, second light is on and off constantly not flashing but not consistently on, wifi is CONSTANTLY ON, not blinking. When I reset, still the same thing, nothing changes
nope, I think the unit has gone bad, but I do remember manually turning off the wifi function, just cannot turn the wifi function back on
4 года назад+1
hello, some of you have resolve it?, I have the exact same problem, the wifi light doesn't turn on and the device is just restarting over and over again making noise.
@@jakew8960 , Hi, have you still got a problem with your tp link ?? ive never really had trouble up until now that none of my devices will connect even though my TP- link is paired correct
After resetting the extender, it will revert back to broadcasting its default SSID. You should then be able to connect to the default SSID using the default password that was supplied with your AV600. Hope that helps.
Hi Ibrahim, If you turn off WiFi on your computer, then connect the computer to your AV600 via a network cable. By entering the IP address assigned to your AV600 into your web browser. You should then be able to access the Web based user interface for the AV600. You might be able to use tplinkplclogin.net. However, if that does not display the AV600 web user interface. You simply need to enter the IP address your AV600 has been assigned into your Web browser. If you are not sure what the IP address that your router has assigned the AV600. Try running a network scanner. This video might help you to discover what IP address the AV600 is using. For macOS - ruclips.net/video/AlJs26OgWYo/видео.html For Windows 10 - ruclips.net/video/OhTd82ReZ-Y/видео.html
Massive help, love this thank you
When I reset it, the wifi led stays solid green, not intermittent green
I've tried that now a million times (and have successfully done so in the past) but now - ZILCH!
Same here fucking powerline led isnt working
@@snipezz2806 me neither
I'm having an issue where an orange light is flashing on my ether net port on the back of my pc. Any ideas?
Hi where did u get the power reset tool ? thanks Mark
It's actually the 3mm screwdriver from a Victorinox Cyber Tool M Swiss Army Pocket Knife. However it makes for a fantastic reset tool, that can be bought individually from Amazon - amzn.to/3x382wQ
@@mydoodads good man thanks for help 👍👍👍
Can I connect it to the internet without the lan cable connected to my router?
No, you will need to connect it to your router via a LAN cable.
mydoodads is there anyway I can have internet in a place without having to connect lan cable?
@@lolbackup2212 You could use a WiFi extender. Possibly something like a TP-Link TL-WA850RE N300.
However, this is not a recommendation as this type of technology, while cheap, just is not all that great.
I found that by using this sort of WiFi extender, the technology was fine for basic internet stuff ie browsing or email. But poor for anything that required real bandwidth, like streaming, or using games consoles
If you are UK based, can I suggest that you look into something called BT Whole Home Mesh WiFi. www.expertreviews.co.uk/bt/1405560/bt-whole-home-wi-fi-review-great-value-mesh-wireless
While I have not yet had a chance to play with one. I have heard that they can be used to extend the WiFi on your existing router. However, being newer mesh technology they give better data speeds than the old style wifi extenders.
mydoodads I play on a gaming pc and I stream and I will go to another room that does not have a lan cable and so do I have to bring a lan cable to my room or is there i way I can do it wirelessly?
@@lolbackup2212 If the WiFi to your house does not reach the room where you are playing or streaming. You will have to either install better WIFi or using a network cable.
It is very clear thank you very much
Thank you very much
Im wanting to do this because at the start when i bought it it was 30 mbps now its 13
Did this solve the problem? I face the same issue. 125 mbps provided, 90-100 mbps reached the computer through CPL. Then, 2 years after it dropped to 30-40 mbps. Now I have a 400 mbps connexion with my new provider and still, only 30-40 reach the computer. I'll try this.
Did it work?
My wifi indicator light is off all the time and we can’t Connect to it, doing this can it solve the problem?
All this would do is return your TL-WPA4226 back to its defaults. This would then allow you to try and set it up again.
However, many factors can effect the performance of a wireless connection. So you might be better checking for wireless interference first.
Devices that will interfere with wifi include, cordless telephones, microwave ovens, bluetooth devices, Christmas tree lights and other wireless routers.
If the problem only just occurred, I would suspect signal interference. So In the first instance try changing the wifi channel on your extender. You would be looking to use 1, 6 or 11. Avoid using auto.
Hope this helps.
@@mydoodads i can’t change the wifi channel because I can’t connect to the amplificator, and as well only the first 2 light are on and every 5-10 seconds it restarts automatically and cuts the signal when i try to use LAN cable instead of wireless option.
You might be able to change settings on the amplified, by connecting your computer via a network cable rather than wifi. Failing that it might be worth resetting it and trying to reconfigure it
@@mydoodads i didn’t ever configurated it, but im afraid of resetting it and not solve the problem
It’s possible that the amplified may have popped and has become faulty. I think you might need to contact TPLInk support.
My TP link AV600 will not show up in internet.
Perfecto!!!
Nope.
for me the TL-WPA 4220 has ON/OFF light on all the time, second light is on and off constantly not flashing but not consistently on, wifi is CONSTANTLY ON, not blinking.
When I reset, still the same thing, nothing changes
Same
can i connect tow repeters with the same router
No
@@hotluwigi6914 Wait, you gonna tell me I have to get 3 routers for 3 TL-WPA 4220?
Thankyou!!
My WiFi light doesn’t come on at all
same here, did you figure out how to get it on ?
@@tundrasheep same, did you fix it?
nope, I think the unit has gone bad, but I do remember manually turning off the wifi function, just cannot turn the wifi function back on
hello, some of you have resolve it?, I have the exact same problem, the wifi light doesn't turn on and the device is just restarting over and over again making noise.
@ I have just sent it back to the shop due to warranty
Can I reset it and use this ruclips.net/video/gnE13Ui8elE/видео.html video to reconnect again?
mine says no internet connection in orange below the network name when u try to connect
@@jakew8960 , Hi, have you still got a problem with your tp link ?? ive never really had trouble up until now that none of my devices will connect even though my TP- link is paired correct
Joe White I’ve got this problem too have you had any fixes for it
How do I connect to the WiFi after?
After resetting the extender, it will revert back to broadcasting its default SSID. You should then be able to connect to the default SSID using the default password that was supplied with your AV600. Hope that helps.
mydoodads what if I don’t remember default password which as supplied with my av600
Hi Ibrahim,
If you turn off WiFi on your computer, then connect the computer to your AV600 via a network cable. By entering the IP address assigned to your AV600 into your web browser. You should then be able to access the Web based user interface for the AV600.
You might be able to use tplinkplclogin.net. However, if that does not display the AV600 web user interface. You simply need to enter the IP address your AV600 has been assigned into your Web browser.
If you are not sure what the IP address that your router has assigned the AV600. Try running a network scanner. This video might help you to discover what IP address the AV600 is using. For macOS - ruclips.net/video/AlJs26OgWYo/видео.html For Windows 10 - ruclips.net/video/OhTd82ReZ-Y/видео.html
@@IbbyK4 hi, happily it's written on the back label. SSID name and password.