Alex Henry On the G the turn signal is in the middle of the halo ring. Turn as tail mod makes the halo ring blink instead of the middle. Much more modern look. Thanks for Watching
Pablo Chiguil check here rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F112759321844 Headlights here Modifystreet For 08-13 Infiniti G37/14-15 Q60 Glossy Black Projector Headlights Left/Right Replacement Assembly www.amazon.com/dp/B07X74SKRX/ref=cm_sw_r_cp_tai_EJx4DbEMXKHP7 Hope this helps Thanks for the Sub too🤘🏼
Joshua Spaar Hope this Helps Thanks for Watching rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F112759321844 rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm% rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F283386535643 Look at this on eBay rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F221729493905 rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F162768710644 www.redlinegoods.com/G37shiftboot.php www.amazon.com/dp/B072BNV3YT/ref=cm_sw_r_cp_tai_SfQgDbTK6MBB4 www.z1motorsports.com/z1-products/z1-motorsports/z1-370zg37-ss-test-pipes-p-4748.html rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F352562726575 www.z1motorsports.com/air-intakes/z1-motorsports/z1-high-flow-intake-upgrade-kit-for-z1-or-stillen-gen-intakes-p-9199.html www.stillen.com/performance/air-intake-systems.html
Bro I’m mad some idiot hit and run my g37s. Dude fucked up my headlight and bumper on the driver side and insurance doesn’t want to fix it either and I have full cover.
Bro I got it from here and Thanks for Watching & appreciate the comment rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F112312923773 Tail Lights rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F112759321844
Cowgoesoink I bought it from here rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F222923402026 I removed the entire steering wheel & disassemble it to the frame only because I wrapped the bezels with CF. It’s quite simple to do. Just apply tape and glue then begin to stitch this take the most time & percision. It’s been over a year and it still looks good. The materials are good quality. Thanks for Watching
Jacob Proctor I agree Bro. Thanks for Watching BTW. I ran some 245/45 rear tires that probably helped with the stance But went back to 245/40 cause it rubbed while the tires were new if hitting bumps.
@@tgreen200 I'm planning on buying a G37 soon. I have $5k saved up you can get them for around $9k. Do you have any recommendations or advice you could help me with?
Jacob Proctor My 1regret is not finding a manual gearbox. Instead I got the auto cause I banged gears for over 20 years in a 3000gt but I do miss it at times. But the auto is great too for daily driving in traffic. If you do get one check it good for any leaks. I bought mines with 105000 almost 3 years ago. I’m at 189000 so far. My only issue was a vacuum leak from a crack on part of intake. But regular maintenance like spark plugs brakes tires serpentine belt & pulleys & tensioner changed and definitely oil. You’ll need to check oil weekly if you drive a lot. They burn oil good. I change my oil every 4000 miles with synthetic just because of my high miles. I haven’t had any water pump, alternator, starter, issues. I did change a o2 sensor for bank 1 sensor 1 because of the vacuum leak. If possible remove o2 sensors & spark plugs this can tell you a lot about the motor you’re gonna get. Thanks for Watching and Welcome to the G club.
Jacob Proctor If this is the situation you’re in I would definitely get a mechanic to check those items before the buy. Also if you could keep the car a weekend before you finalize everything would be good to do also. To have time to drive it more than up the street. Also get it on a scan tool to check for old codes or pending codes or to just check fuel trims & o2 sensor live data. Thanks again
Zertra Check here. Thanks for watching Look here LED Car Logo Cup Holder Pad Waterproof Bottle Drinks Coaster Built-in Light 7 Colors Changing USB Charging Mat LED Cup Mat Car Atmosphere Lamp 2PCS www.amazon.com/dp/B07FYRZG1K/ref=cm_sw_r_cp_api_i_8nmnCbRGWH9RG
Eddy Diaz Bro Thanks for the Sub. Just waiting on the ArkGrip cat back to come in so I can upload the results. Hope you find that hood. Here’s where I got a bumper from. Now I didn’t pay that much 500 but looks like it went up in price. Lifetime Warranty if peels. rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F331032314865
Hey quick question, where did you get that front bumper from? Cause i got a `10 coupe with the non sport bumper and im looking make the bumper swap switch, is there anything besides the plastic bumper cover i have to get? Thanks!
Gunoftruth Thanks for Watching Bro. The bumper is naked so no rubber trim no fog light covers no lower plastic insert below grill no clips no stiffener no grill no bolts or screws. I had to transfer those items over to new bumper. You can find it here rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F331032314865 Also your non sport bumper may not have that rubber trim to match your new one. And also the fog light covers may be different on the non sport models
Torvarris Brown Yes sir I did. Think in terms of mechanics 🧰. It will work because it adds more dense air which is colder being positioned in front of condenser instead of Bay(hot). It will also be positioned in front of grill instead of its current location. Also selecting a 3in Intakes will harm the car. Those are usually for boosted G. Which I will TT my G in like 3 or 4 years. You’ll see the gains right off. You shouldn’t get a CEL for that mod. Which you probably already knew. Let me know bro once you install.🤘🏼
Nice build so far man. All you need next is some coil overs or swift springs and it looks perfect. Cheers from Delaware. Btw where you get the shift knob at?
TLE0622 IPL What’s up Bro. I got my eyes on some GodSpeed Monos for $900 plus camber kits F/R. But I think I’m gonna get the test pipes & tune next for about the same price @ Z1 Motorsport. With my current bolt on She’s got untapped power....after I see the power She lays down that might make rethink my coil over set up.. Here’s the link Loncky Black Genuine Leather Gear Shift Knob Cover for Infiniti FX35 FX37 FX50 /EX35 EX37 EX25 IPLG /G25 G35 G37 /QX56 QX80 QX70 QX50 /Q60 Q40 Automatic Accessories www.amazon.com/dp/B0776S319F/ref=cm_sw_r_cp_tai_Qih2BbC4MCY7N Thanks for Watching..
Quick One idk if you saw my videos but I had the basic bolt ons z1 intakes motordyne m370 exhaust and art pipes and made 316whp. You can get there easily
TLE0622 IPL I caught your video. Nice. G. I got those Swift Springs in one of my carts. I was wondering about the Rub. Thanks for sharing. Might need to change out shock absorbers. I had that same issue with my 3000gt. But I never changed the shocks LOL. Is that an Automatic? I couldn’t really tell from video. That steering wheel is nice. You spoiling her....
Quick One yea it’s the 7at that started in 2010 and up. I got the first year it came out with the IPL in 11. And I don’t have running issues unless if I go over a big bump. The cars have natural camber once you drop it. And you’ll feel a real difference once you get ecutek or uprev tunes. Either or is good
Mark Bro So far on just my mods I’ve spent $6800. Doesn’t include any installs prices or materials I used to install but I am on my 2 Exhaust also ARK Grip , most of the work I do my self. Going on 3 years almost so she’s almost done, but not really cause I want Twins so that’s gonna cost me a car at least but I want more insurance than what I already got. Ya know GAP. I will tell you Bro once you get bit by this bug you’ll be hooked on mods cause you gonna want more. But it’s all worth it when you get the thumbs up 👍🏼. That joy is priceless!
@@tgreen200 Holy shit, that's insane😭I'm taking my time but I hope I can reach that level someday lmaoo, most of my installs have to be done by someone else due to the fact that I can't work on my car in my building sadly
Mark Yeah Bro it’s pricey. Then to top it all off I’ve done plugs twice. #5 Coil also, 2 sets of tires about to be on 3rd before the year up, About to replace all pulleys on serpentine belt (yikes) pricey $. Plus belt. Valve cover gaskets ordered. No leaks but needs it. Brakes pads 2x. Oil every 4000 miles synthetic 25 for oil & 8 for filter. 105000 when I bought it now 195000. Lots of oil changes to keep her purring. Plus they burn oil bad. Vacuum leak detected Smoke machine test. Need to replace my steering rack $$$. Gonna run BC coils & SPC FR control arm for next mod. Then get those headlights swapped out. Once I lower it & if it looks dope I might for-go the carbon fiber front rear & sides lip diffusers. All depends so I’m in for some $$$. I hope your ride is everything you want it to be
Randy Turner Hey Bro Thanks for watching here’s where I started when I bought these back in December rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F372445088664
Bro thanks for Watching you can find it here rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F323576125576 And here rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F172719381814
@@tgreen200 people have talked me out of the j2 catback people have told me it doesnt hold up well and I live in New England so not sure might just have to settle for an axle back for now
Lil_HighGround LIVE The weather can be harsh in that area. If you’re looking for gains like I am, All stock pipes got to go. It’s holding up good for me. Memphis..
Lil_HighGround LIVE in the salt belt states where we live in (Delaware for me). I would suggest a quality cat-back exhaust like stillen or invidia. The flex pipes on the lower end priced exhaust tend to crack as they age. I had a Godspeed HKS rep on my g35 coupe and sold it to Mils Garage (check out his build of his G on RUclips). After 2 years the flex pipes cracked and became unusable.
TLE0622 IPL My next exhaust will probably be Motordyne. Cool I follow Miles. Yeah the j2 won’t hold up long term. This is my starter exhaust set up.Those exhaust are some good choices Stillen/Invida .
Bro I was gonna ask if you was from Memphis bro. I lived on stateline Road Town and country. I was like this shit looks familiar. I’m also in the Memphis VQ Facebook club
Alex Manoshin Bro most of us don’t care about the cost. We love the Cars! Old G’s & New G. Take your pick. So put yourself on the sellers side of things. Supply and Demand...
Yeah supply and demand true but the $ ur spending on making g or z run faster u could be driving sti or evo who will smoke g and z unless u spend $ turbocharging z and g
@@alexmanoshin1943 sti and evo are nothing without turbo. G37 are sport luxury vehicles and different league from track cars. Sti cost as much as a base g37
Alex Manoshin StI and evo ugly asf though.... no one want a super fast car that’s not pleasing to look at, no female every complain about my 2015 Q60/g37 once or called it slow. Stop trying to impress guys or worry who’s the fastest on the street.
Update Test Pipes are installed 🤘🏼 & Tune is done ✅ Uprev Arc
Can you put links to some of the mods youve done?
Dyno numbers after tune?
sooooo bad ass
I like what you have done to your car but more importantly you like what you've done to your car so don't pay any attention to others. Good video
What’s that tail to turn thing
Alex Henry On the G the turn signal is in the middle of the halo ring. Turn as tail mod makes the halo ring blink instead of the middle. Much more modern look. Thanks for Watching
But this g looks sick af
Man I appreciate it.
My guy quick question. Where did you get those taillights 😍😍 ? Oh and I just subscribed 💯
Pablo Chiguil check here rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F112759321844
Headlights here Modifystreet For 08-13 Infiniti G37/14-15 Q60 Glossy Black Projector Headlights Left/Right Replacement Assembly www.amazon.com/dp/B07X74SKRX/ref=cm_sw_r_cp_tai_EJx4DbEMXKHP7
Hope this helps Thanks for the Sub too🤘🏼
Quick One thank you man need those sooon . For the headlights does it come with both or you chose which side you need?
Pablo Chiguil The headlights are not stock so one wouldn’t match. But they might sell you just one. Wouldn’t hurt to ask. Thanks again for Watching
Sick G bro.
Blassie P I appreciate that! Thanks for Watching Fam.
hey whats the name of the comapny for the dash cover
Dub edition on eBay Fam. Thanks for Watching
Nice ride bro. Love my g. Whered u get the front led emblem from?
eBay over 3 years ago. I’m not sure anyone’s making em like they use too.. Thanks for the compliment...I love my G too. Thanks for Watching.
Dude this is a sick g. Is there a way to get links or like a list of all the places and brands you used?
Elliott Jackson I’ll work on that bro. Thanks for Watching. I’ll post ASAP. Thanks for the compliment too BTW. Check on my Channel.
Not a bad start for a year, I’m trying to come up way more by the end of 2018
Mumble Bro thanks. It’s getting costly along with regular maintenance. But it got its rewards too...2018 is the year....
U here too lol
Wilfredo Castro.10 I’m everywhere lol 😂
Nice work
K P Thanks Bro. Got the ark grip exhaust installed. Check out the Channel 👍
i say a diffuser, headlight upgrade too
17rickk I agree with you. On the list. Thanks for watching BTW
@@tgreen200 yo car go crazy, cant wait to see the future upgrades n yii
I've basically got the same car aesthetically and … thumbs up for blacking out the silver trim It needs to be done.
hey bud Thanks for watching Bro. It’s covered with a carbon fiber lip.
you should put some links to the parts you've done!
Joshua Spaar Hope this Helps Thanks for Watching
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F112759321844
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F283386535643
Look at this on eBay
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F221729493905
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F162768710644
www.redlinegoods.com/G37shiftboot.php
www.amazon.com/dp/B072BNV3YT/ref=cm_sw_r_cp_tai_SfQgDbTK6MBB4
www.z1motorsports.com/z1-products/z1-motorsports/z1-370zg37-ss-test-pipes-p-4748.html
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F352562726575
www.z1motorsports.com/air-intakes/z1-motorsports/z1-high-flow-intake-upgrade-kit-for-z1-or-stillen-gen-intakes-p-9199.html
www.stillen.com/performance/air-intake-systems.html
Bro I’m mad some idiot hit and run my g37s. Dude fucked up my headlight and bumper on the driver side and insurance doesn’t want to fix it either and I have full cover.
Sorry to hear that Bro. I just replace both of mine. Due to leak on driver side for about 400
beautiful car. where did u get the dash mat from? if you. don't mind me asking
Bro I got it from here and Thanks for Watching & appreciate the comment
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F112312923773
Tail Lights
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F112759321844
How did you do the steering wheel?
Cowgoesoink I bought it from here rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F222923402026
I removed the entire steering wheel & disassemble it to the frame only because I wrapped the bezels with CF. It’s quite simple to do. Just apply tape and glue then begin to stitch this take the most time & percision. It’s been over a year and it still looks good. The materials are good quality. Thanks for Watching
It looks mean at the end
Jacob Proctor I agree Bro. Thanks for Watching BTW. I ran some 245/45 rear tires that probably helped with the stance But went back to 245/40 cause it rubbed while the tires were new if hitting bumps.
@@tgreen200 I'm planning on buying a G37 soon. I have $5k saved up you can get them for around $9k. Do you have any recommendations or advice you could help me with?
Jacob Proctor My 1regret is not finding a manual gearbox. Instead I got the auto cause I banged gears for over 20 years in a 3000gt but I do miss it at times. But the auto is great too for daily driving in traffic. If you do get one check it good for any leaks. I bought mines with 105000 almost 3 years ago. I’m at 189000 so far. My only issue was a vacuum leak from a crack on part of intake. But regular maintenance like spark plugs brakes tires serpentine belt & pulleys & tensioner changed and definitely oil. You’ll need to check oil weekly if you drive a lot. They burn oil good. I change my oil every 4000 miles with synthetic just because of my high miles. I haven’t had any water pump, alternator, starter, issues. I did change a o2 sensor for bank 1 sensor 1 because of the vacuum leak. If possible remove o2 sensors & spark plugs this can tell you a lot about the motor you’re gonna get. Thanks for Watching and Welcome to the G club.
@@tgreen200 I dont know shit about cars do you think I should take it for a pre purchase inspection first?
Jacob Proctor If this is the situation you’re in I would definitely get a mechanic to check those items before the buy. Also if you could keep the car a weekend before you finalize everything would be good to do also. To have time to drive it more than up the street. Also get it on a scan tool to check for old codes or pending codes or to just check fuel trims & o2 sensor live data. Thanks again
where did you get the LED cup holders ?
Zertra Check here. Thanks for watching Look here LED Car Logo Cup Holder Pad Waterproof Bottle Drinks Coaster Built-in Light 7 Colors Changing USB Charging Mat LED Cup Mat Car Atmosphere Lamp 2PCS www.amazon.com/dp/B07FYRZG1K/ref=cm_sw_r_cp_api_i_8nmnCbRGWH9RG
Clean I love it
Looks better stock
Ricardo Santiago Thanks for Watching. Stock? Meaning no Mods? Or ride height. 🤘🏼
Where did you get that bumper
Eddy Diaz 2008 Model Stock Bumper. Thanks for Watching Bro.
@@tgreen200 keep posting vídeos bro i subscribed too. I need to get a new hood and bumper. I appreciate your content
Eddy Diaz Bro Thanks for the Sub. Just waiting on the ArkGrip cat back to come in so I can upload the results. Hope you find that hood. Here’s where I got a bumper from. Now I didn’t pay that much 500 but looks like it went up in price. Lifetime Warranty if peels. rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F331032314865
Where did you get that carbon fiber trunk lip???
Thanks for Watching Bro right here. rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F282700224936
Hey quick question, where did you get that front bumper from? Cause i got a `10 coupe with the non sport bumper and im looking make the bumper swap switch, is there anything besides the plastic bumper cover i have to get? Thanks!
Gunoftruth Thanks for Watching Bro. The bumper is naked so no rubber trim no fog light covers no lower plastic insert below grill no clips no stiffener no grill no bolts or screws. I had to transfer those items over to new bumper. You can find it here rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F331032314865
Also your non sport bumper may not have that rubber trim to match your new one. And also the fog light covers may be different on the non sport models
hey bro did feel any difference with the cai
Torvarris Brown Yes sir I did. Think in terms of mechanics 🧰. It will work because it adds more dense air which is colder being positioned in front of condenser instead of Bay(hot). It will also be positioned in front of grill instead of its current location. Also selecting a 3in Intakes will harm the car. Those are usually for boosted G. Which I will TT my G in like 3 or 4 years. You’ll see the gains right off. You shouldn’t get a CEL for that mod. Which you probably already knew. Let me know bro once you install.🤘🏼
@@tgreen200 so will you feel a difference without tune, I heard they need to be tune is that correct
Torvarris Brown Yes sir it will work without it.
@@tgreen200 cool bro thanks
Lovin the rear tail lights. Are they depo brand? How do you like them so far?
Keep the mods coming and awesome video.
Joel Buenaventura Yes they are Depo. No issues with moisture...Thanks for Watching If you haven’t check out my channel...👍🏼
Great car bro, let ricers rice btw 🕊️🕊️🕊️
Mr. Grimm 200 Thanks Bro. Agreed 🤘🏼& Thanks for Watching also🔥
Bro i wish my g37 could be this great 😭 within time tho
Kameronismyname Bro Thanks. Gonna be working on suspension next BS racing & SPC arms
Where u get the floor plans
Osvaldo Magana rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F352562726575
Thanks for Watching Bro
Looks badass! Great job!🏆
Where’s the links to all this
Jose Haro Bro Thanks for Watching. What caught your eye. I do have some links up in my other videos on my Channel.
Nice build so far man. All you need next is some coil overs or swift springs and it looks perfect. Cheers from Delaware. Btw where you get the shift knob at?
TLE0622 IPL What’s up Bro. I got my eyes on some GodSpeed Monos for $900 plus camber kits F/R. But I think I’m gonna get the test pipes & tune next for about the same price @ Z1 Motorsport. With my current bolt on She’s got untapped power....after I see the power She lays down that might make rethink my coil over set up.. Here’s the link Loncky Black Genuine Leather Gear Shift Knob Cover for Infiniti FX35 FX37 FX50 /EX35 EX37 EX25 IPLG /G25 G35 G37 /QX56 QX80 QX70 QX50 /Q60 Q40 Automatic Accessories www.amazon.com/dp/B0776S319F/ref=cm_sw_r_cp_tai_Qih2BbC4MCY7N
Thanks for Watching..
Quick One idk if you saw my videos but I had the basic bolt ons z1 intakes motordyne m370 exhaust and art pipes and made 316whp. You can get there easily
TLE0622 IPL I caught your video. Nice. G. I got those Swift Springs in one of my carts. I was wondering about the Rub. Thanks for sharing. Might need to change out shock absorbers. I had that same issue with my 3000gt. But I never changed the shocks LOL. Is that an Automatic? I couldn’t really tell from video. That steering wheel is nice. You spoiling her....
Quick One yea it’s the 7at that started in 2010 and up. I got the first year it came out with the IPL in 11. And I don’t have running issues unless if I go over a big bump. The cars have natural camber once you drop it. And you’ll feel a real difference once you get ecutek or uprev tunes. Either or is good
You got an IG? I’m @tleo_ipl37.
Could you put all the links in the description cause me and a lot of other people wanna get the same shit lmao
ctdub1ify Bro I sure will work on that. Thanks for Watching. Got that Ark Grip installed. 🔥
Stock from factory look better no paint in the wheel or aftermarket spoiler
Interesting. Thanks Bro
How much did the whole build come up to? I wanna get started on my G37x !
Mark Bro So far on just my mods I’ve spent $6800. Doesn’t include any installs prices or materials I used to install but I am on my 2 Exhaust also ARK Grip , most of the work I do my self. Going on 3 years almost so she’s almost done, but not really cause I want Twins so that’s gonna cost me a car at least but I want more insurance than what I already got. Ya know GAP. I will tell you Bro once you get bit by this bug you’ll be hooked on mods cause you gonna want more. But it’s all worth it when you get the thumbs up 👍🏼. That joy is priceless!
@@tgreen200 Holy shit, that's insane😭I'm taking my time but I hope I can reach that level someday lmaoo, most of my installs have to be done by someone else due to the fact that I can't work on my car in my building sadly
Mark Yeah Bro it’s pricey. Then to top it all off I’ve done plugs twice. #5 Coil also, 2 sets of tires about to be on 3rd before the year up, About to replace all pulleys on serpentine belt (yikes) pricey $. Plus belt. Valve cover gaskets ordered. No leaks but needs it. Brakes pads 2x. Oil every 4000 miles synthetic 25 for oil & 8 for filter. 105000 when I bought it now 195000. Lots of oil changes to keep her purring. Plus they burn oil bad. Vacuum leak detected Smoke machine test. Need to replace my steering rack $$$. Gonna run BC coils & SPC FR control arm for next mod. Then get those headlights swapped out. Once I lower it & if it looks dope I might for-go the carbon fiber front rear & sides lip diffusers. All depends so I’m in for some $$$. I hope your ride is everything you want it to be
Damn videos good but damn thats annoying song
NOTABLACK IPL Bro thanks for Watching & I agree it was before I found out about iMovie.
Nice man, where did u get the custom floor mats?
Randy Turner Hey Bro Thanks for watching here’s where I started when I bought these back in December
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F372445088664
Should of put some rev sounds of the G bro. But sick whip 🔥
Luis Vega I can dig it. Thanks for Watching and appreciate the compliment check this out ruclips.net/video/e3zat72CJvE/видео.html
4:34 custom gril
Bro thanks for Watching you can find it here rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F323576125576
And here rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F172719381814
awesome video man .. alot of good stuff here.. we also have same model and color so i subbed up .. also im looking at a used full catback j2..
Lil_HighGround LIVE Bro thanks for the comments. Cool on the J2. I’m waiting on z1 test pipes to pair with my set-up. Thanks again.
@@tgreen200 people have talked me out of the j2 catback people have told me it doesnt hold up well and I live in New England so not sure might just have to settle for an axle back for now
Lil_HighGround LIVE The weather can be harsh in that area. If you’re looking for gains like I am, All stock pipes got to go. It’s holding up good for me. Memphis..
Lil_HighGround LIVE in the salt belt states where we live in (Delaware for me). I would suggest a quality cat-back exhaust like stillen or invidia. The flex pipes on the lower end priced exhaust tend to crack as they age. I had a Godspeed HKS rep on my g35 coupe and sold it to Mils Garage (check out his build of his G on RUclips). After 2 years the flex pipes cracked and became unusable.
TLE0622 IPL My next exhaust will probably be Motordyne. Cool I follow Miles. Yeah the j2 won’t hold up long term. This is my starter exhaust set up.Those exhaust are some good choices Stillen/Invida .
Bro I was gonna ask if you was from Memphis bro. I lived on stateline Road Town and country. I was like this shit looks familiar. I’m also in the Memphis VQ Facebook club
Rice
Lane Sargent Thanks for Watching.
Looks stock af lower it too
Sniper Habitz I agree Bro. That’s next for me and a new exhaust. Gonna get BS racing coil overs and injen exhaust
No offense g37 x50 and 60 are luxury cars
Alex Manoshin Bet. I agree witcha. Grown Mans car.
Waste of $ on g37 the only person Who’s making the money is the seller
Alex Manoshin Bro most of us don’t care about the cost. We love the Cars! Old G’s & New G. Take your pick. So put yourself on the sellers side of things. Supply and Demand...
Yeah supply and demand true but the $ ur spending on making g or z run faster u could be driving sti or evo who will smoke g and z unless u spend $ turbocharging z and g
@@alexmanoshin1943 sti and evo are nothing without turbo. G37 are sport luxury vehicles and different league from track cars. Sti cost as much as a base g37
Alex Manoshin StI and evo ugly asf though.... no one want a super fast car that’s not pleasing to look at, no female every complain about my 2015 Q60/g37 once or called it slow. Stop trying to impress guys or worry who’s the fastest on the street.
Where did you get those taillights?
Fatbuux What’s up Bro Thanks for Watching found them here. rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F112759321844