THE NEW SNAP-ON YAKS42 BUTANE SOLDERING IRON !!
HTML-код
- Опубликовано: 25 авг 2024
- #snapon #solderingiron #yaks42
POWER PROBE Butane Soldering Kit (PPSK) [Automotive Diagnostic Car Test Tool, Easy Start Electronic Ignition, Adjustable Flame, with Multiple Tips
amzn.to/2PMfPcU
The Toolbox Widget is a modular and smarter way to organize your tools in your tool box. Every widget is made with a strong neodymium magnet in its base that holds your widget in place.
www.toolboxwid...?ref=5b63a486874d8
Quality, affordable, useful tools below!!!
GearWrench 80550 57 Piece 3/8-Inch Drive 6 Point Socket Set
amzn.to/2wuuZe1
GearWrench 80564 7pc SAE Flex Socket Set & 80565 10pc Metric Flex Socket Set
amzn.to/2MCS6hh
GearWrench 81923 28-Piece Full Polish Combination Non-Ratcheting Wrench Set SAE/Metric
amzn.to/2BVHghd
Capri Tools CP30002 S2 Metric Hex Wrench Bit Socket Sets, 13-Piece
amzn.to/2N01MBU
Capri Tools CP30031 Master Torx Star Socket Set, 60-Piece
amzn.to/2MA7drU
Capri Tools 30032 Master Hex Bit Socket Set, Metric & SAE, 32-Piece
amzn.to/2N4PEQd
Capri Tools Mechanic's Screwdriver Set, Oil Resistant Handle with S2 Steel Shaft, 6-Piece
amzn.to/2N01URU
Capri Tools 20012 Self-Adjusting Wire Stripper
amzn.to/2MCUc0D
Capri Tools 32070 Air Hammer, Hex Shank + 4 Chisels
amzn.to/2MEYcOl
Channellock 3 Piece 9-1/2-Inch, 6-1/2-Inch, and 12-Inch Tongue and Groove Plier Set
amzn.to/2P9mbla
Knipex 002007US1 3-Piece Alligator Pliers Set (7-Inch, 10-Inch, 12-Inch)
amzn.to/2ojO3YE
IRWIN Tools 34-Piece Impact Series Automotive Fastener Drive Bit Set (1840391)
amzn.to/2og2s86
Irwin Tools BOLT-GRIP Extractor Expansion Set, 5 Piece, 394002
amzn.to/2Ly5Rs8
Irwin Tools Hanson 53227 Hex Head Multi-Spline Screw Extractor Set, 25 Piece
amzn.to/2NshWRs
IRWIN Tools 76 Piece Machine Screw/Fractional/Metric Tap and Hex Die Super Set (26376)
amzn.to/2NvoSxk
Lang 972 40 Piece Fractional and Metric Thread Restorer Kit
amzn.to/2PIpDVj
Lang Tools (3495 12-Piece Fixed Tip Combination Internal/External Snap Ring Pliers Set
amzn.to/2BVQKsT
Lang Tools 279 Brake Caliper Press
amzn.to/2wp5IlY
Lang Tools (1129 Retractable Test Lead
amzn.to/2PctjgY
OEMTOOLS 25997 600 Lumen Rechargeable Multi-Use Li-Ion Work Light
amzn.to/2PbgWBI
OEMTOOLS 24960 Portable Tear Down Tray, Black, 29"
amzn.to/2ojYqvE
OEMTOOLS 87009 No-Spill Coolant Filling Plastic Funne
amzn.to/2PJUdxD
ATD Tools 99650 XL Ratcheting Wrench Set with 10 Metric Sizes - 5 Piece
amzn.to/2okhaLo
ATD Tools 8762 Stainless Steel Square Magnetic Parts Tray
amzn.to/2okhCJA
ATD 70401 - 7-Drawer Flip-Top Tool Cart, Black
amzn.to/2okOrWU
GoPro - Hero HD Waterproof Action Camera
amzn.to/2PcvCAE
THANKS FOR WATCHING! And please use one of the affiliate links above to do any and all your shopping on Amazon.com . You do NOT have to buy anything above, you can shop as normal as you always have. By using one of the links above it helps support the channel. Thanks again.
JUSTINATVTOOLS@GMAIL.COM
I forgot to mention in the video that the part that failed is a 2nd head. All the tips are interchangeable with both heads. Both heads are identicle in every way.
I just got one last week and the 2nd head failed right out the gate for me too.
My 2nd heads been junk since it came out of the package.
Was it replaced?
Yes. I was giving a new one the next week. I've been using both heads for over a year now with no problems.
So it’s common for the heads to go out?
Figured I'd treat myself to a few new bits for work today and got myself one of these soldering irons along with the TORCH400 and a pair of 87ACF diagonal cutters. The iron works really well. The hot knife cutter, hot air adaptor and plastic welding adaptor all work too. As for the igniter, its a piezo-electric starter. Give it a few moments between strikes if it doesn't ignite. Too many rapid clicks stresses them out. Same deal with disposable lighters too. You'll know when the hot air adaptor is working as you can look straight down the end and you'll see the wire mesh inside glowing orange. Best to turn the gas all the way down, then turn up 1/4 of a turn, slide the switch forward to set the gas going, give it an extra 2 seconds and give it a firm push forward with a slight hold to ignite it. When you see the mesh inside glowing, turn up the gas as high as you want to get some proper heat output. I managed to heatshrink several loom splices with the air adaptor as well as soldering said splices with the extra wide tip and still had plenty of gas left over. Not gonna' beat a worktop version of course but this is perfect portability wise.
I have one, and it works great. The magnetic feature kicks in too, it will hold to something metal so you can sort of work the wires by moving them while the tool is stationary.
Best intro ever!! I love tools!
THANK YOU!
Just got myself one today. It lit up once. It wont stay on when I let go of the trigger. Now it just wont light at all. Going to swap it next week.
I got the heat gun tip for mine, had to order it but I am interested to see how well it works
You have to play with fuel adjustment. The book says to turn it to high but I had issues with that. Try turning it down all the way and then go up from there. It worked for me and mine was doing the same thing yours did.
My Snap-on guy and me both tried everything we could think of and everything the book said to do. It was definitely D.O.A.
Bro lol i just watch this whole video. Lol tell your snap on guy he Owes me and everyone that watch this a t shirts lol but good video as usual big guy
I own a power probe soldering iron I love it! brilliant idea
That soldering iron is nice
Have one of these…
Nothing but trouble!
The failure mode is a super thin contact on the back of the tip.
It’s for connecting the piezo energy to the igniter in the tip.
That breaks off with use, and I imagine with any abuse.
I’m very careful with mine, and this will be the fourth dead tip in 2 years.
For $175.00, it’s a shame they didn’t build it robustly.
Finally got around to using mine and wouldn't ya know fails right out of the gate igniter doesn't click
First time use of heat gun tip requires lighting with match Pre heat - probably to take off coating on internal of tip. The flame will dissappear once the inside glow coil is working properly. Once it is lit, from then on it will light properly.
Is that in the instructions?
Just have to play with the fuel flow a couple times. Mine works great
The magnet is a good idea.
I bought one just like this from snap on. I returned the piece of shit and got a power probe for well below half the price and it works much better
🤣🤣🤣🤣
I had to take the mesh and the plug out the heat attachment to get it to work
Great video thanks brother. Dang it looks like a great tool to have. Will be looking forward to the update. That sucks right out of the box and messes up. Keep up the great work see you in the next video thanks again brother
Some butane irons u have to flick the ignition switch slowly
Would love some information on how to purchase that is nice I could use the crap out of that iron
Read the instructions before returning it. It said in my instructions that the heat tip will only light with the gas turned to about half.
It was a defective. He and I tried several different ways and things to try and to get it to work. Since the video I have gotten a replacement and it works no matter where I have the gas set. But after I shot the video I did read the instructions just to make sure I wasn't doing something right.
I have that one not used yet and the Milwaukee 12 volt one also
The interchangeable head doesn't have a soldering tip on it to begin with, that's just a placeholder
Another guy on youtube had that same one, it was junk too. Power probe is the way to go.
Do the tipsaybe have a ventilation hole built in, similar to the first soldering adapter you installed and it worked? Thinking the 2nd adapter that dosnht work, because it didn't have any tips installed, may not have the adequate air ventilation to easily ignite... Not pretending that it's good, bc the 2nd is a heat gun style adapter, and you may not want to use a tip and prefer to have the straight heat gun... But on the other hand, if not having that last hole, as the tips look to have, is the problem, then ya may wana drill a lit vent hol near the end of the tip in the 2nd adapter...
Shit got one to day fill it up and nothing on ether topper tip what ever sucks
Can you put a video on how to use it
Yup saw this guy cpl weeks ago, looks spiffy as hell
I use the #yas22a ovr any corded one. I love it so much
You didnt open the vent port, thats the tiny circles in the aluminum cover try to rotate it so it will open and then you'll get good results
It was already determined that it was D.O.A. We put another top part on and it fired right up, tried the top part on 2 other torches and it still wouldn't work.
And there is no way to adjust the vent ports on this torch. They are fixed open.
On Mine the switch keep turning off
Good video #review any Updates!!! I’m looking forward on mine on those uncomfortable spots to solder a wire or two #electrical problems 😅w/o carri g my 3pc soldering kit ..🤬🤐🤫🤦🏽♂️
Thank you! Only updated I have is that its is still working great! The one end that was D.O.A. was replaced by my Snap-on dealer free of charge. He seen this video and seen it was D.O.A.. it gets hot really fast and doesn't burn the butane out fast. This is my favorite soldering iron.
At 5:22 you can literally see you breaking it. It was a "lock" feature on the head so you won't be able to remove it if the gas is on, but sure, let blame the tool or manufacturer.
It didn't break, and still to this day it has never been broken. The tip/head wasn't damaged in anyway other than it did not work. Me and my Snap-on rep looked it over and compared it to 2 others. It simply was D.O.A.
Anybody know what that yellow stuff is in the little playe
It's a sponge.
No heat shrink shield?
No
I bought one of these boys and it's ok. Made very well, feels nice. BUT it doesn't get hot enough. The chisel tips and the large tip are usable, but the point tip and the hot air tip really suck. The pointy tip doesn't even get hot enough at the tip to melt the included solder. Disappointed altogether. This thing has real potential and is designed very nicely but it's just not hot enough.
I noticed you tried to get the tip off while it was locked? Perhaps it broke then. Shouldn't have regardless
No it was full blown DOA
Damn that sucks it failed
Just get your cash back,unless 3rd time is the charm
Those piezo ignitions can be fussy. I have had great luck with my portasol but others seem to think they are trash.
One of my heads died a week after I got mine
You Snap-on dealer should warranty it out if you haven't already done it.
im going to get it done tomorrow, thanks
If he dont , its a $14 part
4
Something told me this thing was gonna be a piece of turd
This thing sucks
Man that makes mine look old mine still has a Flint striker and still works great but I have been thinking about up grading