Mate Ive never built a PC before but watching this has inspired me to have a go! Your tutorial was perfect with explanations clear & concise. Much love from 🇬🇧
This is great timing, I'm just about to build in the same case and almost identical parts list but i went with a Lian Li theme for both PSU and AIO. Unfortunately, i have to wait till the 50 series is released to complete my build, will have to continue to with my 2018 8gb card until then. Thanks for the video, haven't built since 2020 so help to refresh my memory!
Wouldn’t bother my friend, would be a better idea to purchase an 7900xt or xtx, maybe the gre depending on use case. The 5k series has significantly reduced vram and an overall higher price $1500 for the 5070 I believe and it underperforms compared to current gpu market.
@@Gamer-zt9qknot true at all. 5070 is priced at $549. They kept the same amount of vram as the 40 series for their mid tier cards, which sucks but it was not reduced. The only GPU priced higher than $1,500 is the 5090 at around $1,999. The specs and prices have already been confirmed. 5090 has 32gb VRAM.
Yes I agree the 140mm fill the space I run hydroshift aio and have the white lian li evo looks great I actually like it more then the hyte Y70 touch case I had. I just love how everything is lit up and the case looks vibrant and I can see the 5k I spent lol
I completely forgot the EVO RGB can take 140mm 😅 140’s were going to take another week so I couldn’t wait lol I think the Y70 is nice, but I personally am not a fan of how you can’t see the bottom fans; the touch screen version is what’s tempting lol
yeah i was looking at y70 touch too, but riser needs changing to 5.0 and if you go into bios it gets displayed on the touch screen so if you like to tinker a lot maybe it could be annoying… this evo rgb looks really nice and classy without these complications.
I appreciate the feedback ! The white version is nice but I wish LIAN Li replaced the gray grommets with pure white like they do with the Vision Compact white
I agree with you ! The TL and TL LCD look good, but I just hate that they don't have the option for RGB in the middle. I hope Lian Li adds wireless to the Infinity Mirror fans or have a Infinity LCD type. I'm strongly considering the 140's and doing an update video 😅
Perhaps the back clip for adjust the motherboard high mut be rotated because onde side is flat and other side is "rounded", i think the rounded side must be faced to the corner, and the flat side to the center of the rear panel of the motherboard. Ithink if them not rotated then it could be not fit all motherboards dua a little difference in internal space. Great job for explaining all details and how (and why) it must be mounted. Very nice.
I am planning on building a pc with this case and i think the best looking combination would be 140mm fans on the bottom and side, a 120mm fan on the back, and a 360mm AIO with 120mm fans on the top
how is the cooling performance on the AIO with SL-INF fans? i’m looking to build something like this and it looks great but i was considering leaving original fans without rgb for the radiator as the SLs are not really that great airflow wise.
Hello Hero ;) I've finished my first PC built following all your steps. It works!!!!! THANK YOU SO MUCH (where is your patreon?!) the lian fans are turning as you said even if nor windows was installed and L connect neither. Only little one regret : not to have put the mother board on the top position instead of bottom one : it should have been better to put gpu strimer in the bottom of the case. Last thing I'm wondering... What system should I install now??? Windows 10 pro or 11 pro? And then optimize it? Have you an opinion on that point? (I'm using the PC only for gaming and PC VR quest 3 gaming) Thank you so much
I’m glad this tutorial worked out for you !🔥 The only reason why I personally don’t like GPU Strimmer on bottom is because it blocks air flow versus having it the way I do it. I don’t think it’ll make a dramatic difference, but I just visually see air flow being blocked that way 😅 For Windows, I always use whatever the latest is. I use Windows 11 Home. I looked at the pro but there’s nothing there I would use. Hope that helps !
One thing to be clear for those who mount lian li fans that will be driven by L-connect: think of putting them in a logical order (1-2-3-4 in the order in which they are placed in the PC) as well as in the same orientation (connection of the cable in "head" of a block following the "tail" of the previous block) if we want to be able to use later some light effects that pass from one block to another. 🤗
Hello. i've just found that you've built an EVORGB like mine too. So it's even more better than to follow your similar Vision compact built like I was doing first for my built ;) Two questions : in L-Connect, it seems that you has left all your fans of all of your set up under the CPU temperature control... Maybe you haven't finished your settings ? Or is it your choice ? I believed it would be greater to put only radiators fans under CPU control and all the others ones under GPU control ... Am I wrong ? The next question... Your AIO tubes seem to be landing on( or very near) the exhaust hot air of your GPU... Maybe you should put them a little bit away to avoid that the GPU warm the tubes and the water inside ? Or maybe the tubes are well isolated ?Thanks for your great job one more time, you made this perfectly and it REALLY HELP a lot !!! (Like the youtube videos of @"Provoked Prawn" and it's funny to be help by a provoked prawn and a... fire Wolf ;) ;) ;) )
I've got exactly the same motherboard for my next build (waiting until 9950x3d comes out). I've heard that it will be still enough PCIE 5.0 x16 slot working in x8 mode for RTX 50 series (63.015 gb/s bandwidth on PCIE 5.0 x16 is overkill. PCIE 5.0 x8 will have the same bandwidth as PCIE 4.0 x16 has and even 4090 can't cap it). Right now I have two Samsung 990 Pro's (1TB and 2 TB). Should I install on main one windows and other programs, and use 2TB for gaming (Steam library, for example)?
You 3 different software runs at all time for your AIO screen, Fans and LEDs. Do you see how much CPU resources and memory does it uses? Anyway to use all ASUS motherboard to control all with the fan headers, if I bought the ASUS AIO.
You can choose to have the Infinity Fan Hub connected directly to motherboard via ARGB and FAN Pin to let your Motherboard Software control the fans instead. You could also use the other sets of wires found in the single packs, and connect 4 separate connectors to motherboard if you want to be able to control them separately. I don’t worry about running multiple software since the CPU and Memory are on the higher end but these are the resources at idle with 9800x3D : - L-connect 3 ~ 0.4-1% - 180MB - Kanali ~ 0.8 - 1.8% - 220MB Armory Crate / Aura Sync / Fan controller is less than 1% and all ASUS programs are about 260MB
I personally use Signalrgb to control my inf-fans, ram, gpu, case and galahad performance´s rgb. Fan-speeds via bios. But i dont think aio´s with displays are supported, but they may do now. I despise every first party sofware.
MSI MAG B650 Tomahawk WiFi Gaming Motherboard (AMD Ryzen 9000/8000/7000 Series Processors, AM5, DDR5, would this mouther board work for this case and those fans you installed i just like the look of the build with those fans
They're both great, but the EVO RGB gives you more options and is easier to remove glass panels. The H9 Elite has an awesome top see through glass panel, so I would recommend side mounting AIO so that you can see the aesthetics of the top mounted fans. The H9 Elite feels more premium and sturdier so I think it depends on which you prefer based on aesthetics and pricing. I think if you're going for top mounted AIO, then H9 Flow would be a better option. Final note would be 140mm vs 120mm fans, since the EVO RGB allows for triple 140 on bottom, side, and top, I feel like the 140's would look better. ON the H9, having all 120's look more "full"
yo bro please please please make a video or atleast a short on the settings you use for your strimmer cables or L connect lighting in a whole. I cant get the cables to do the affect you have
For that affect; look for "Drizzling" which is found when you have the 3 lines selected. Then you can choose whatever color patterns you want, and set to speed to 25% (or whatever you prefer) and reverse the direction of the effect so that it looks like it's powering.
Check this timestamp : How to Control RGB - 01:31:42 Programs I use is L-Connect 3 for fans / strimmer, Kanali for Panorama AIO, and Armory Crate/Aura Sync for the rest of the components
have a question: Can I install a 420mm radiator with 3x140mm fans at the bottom and 3x140mm fans next to the motherboard? Can I do that? I need an answer, please.”
@@Hussain-wz9te YES YOU CAN DO IT. But test the the clearance with the 2 radiators AND FANs mounted - the lateral mount can be adjusted in depth by rotating it because 120 x 140mm fans and radiators are different, the 140mm are bigger in wide too and it can be conflicted with the default positions of the mounts in the case, and for this reason lian-li provides a method to create more space in depth at the lateral mount, rotating it, it comes to front, and rotating it again, it would be give more depth. If you not test this it can be resulting in superposition one with other, and you "cannot" mount them together or have to less space to mount fittings ore tubes. Just a detail to observe before mounting. But its possible and minded for them.
Both great cases, I like how easy LIAN li makes opening up all the panels. H9 Elite you would need to unscrew the back and then the side glass panel can come off. The front glass also doesn’t come off, where the EVO RGB does, and it’s easy. I will say the H9 Elite feels sturdier and premium. I prefer how the EVO RGB comes with no fans but the back cable management of the H9 Elite in my opinion is easier to work with. The EVO RGB has more setup options, but the trade off is that the 120mm fans might not look full versus the H9 Elite.
I'm not a gamer but I may one day ( I'm 62), I do alot of 3d printing-slicing with Bambu studio which is CPU, GPU dependent, My current dell is 13 years old Del(R) Core(TM) i7-3770 CPU @ 3.40GHz 3.40 GHz optiplex 9010, I replaced the GPU with a GTX 1060 ( I think it is), whats your recommendation for a new replacement pc? I'm thinking 32-64 gb RAM newer chip, something under 2K.. Thank you. My brother has a Skytech Archangel, he loves it. Something with a modular power supply also.. Thank you.
@ Thanks, i currently have the NZXT elite and would like something smaller for my new build. I have the Asus Hero x670e, 9800x3d and 4090 rtx, just need to pick a case.
How is your fan in or out configurations? Is your radiator fans blow the air in or out? From the video it looks like the air blow in to the case. Also the Graphic card has no room for the fan air flows since you make it up. Should just leave it alone.
The way they are setup is : Top 3 Fans Exhaust 1 Rear Fan Exhaust 3 Side fans Intake 3 Bottom fans Intake The GPU has a lot of breathing room so no issues there.
In case they were white, the lighting could look a little different. Since you have the same black ones, it could be your lighting and/or how I set up my camera to capture the video. They look more vibrant when I have no lights on and it helps that my camera captures amazing in low lights. I do also have them set at 100% brightness
The edge is awesome ! I used it on the Vision Compact build. The only thing to consider for this EVO RGB using the edge, is to move the PSU to the top position, since there’s not a lot of space on the bottom left 😅
I really dislike how Lian Li made their GPU RGB strimer strip. It doesnt look fluid at all and really bugs my OCD. Why couldnt they make it the same width all the way through like the motherboard strip? I really dislike it and thats just my opinion.
QVL LISTS ARE OFTEN NOT UP TO DATE, I HAVE EXPERIENCED THIS FOR DECADES! A KILLER BUILD, BUT WHY USE OLD / SLOWER - USED DRIVES DUDE!? Not a fan of the streamers, just looks to animae to me.......
I think it depends on the brand and launch date of the motherboard. Either way, for a stress free overclock, QVL list makes it easy and simple to know which are confirmed. As for the OLD/SLOWER drives, I'm re-using what I currently have for the purpose of making the tutorial. At the moment, PCIe 5.0 is very expensive and not a lot of options. But hopefully I can get a brand to send some to me. Strimmers are optional so I know some might not like it 😅
![How to Build a Gaming PC in 2024! 🛠️ [Step by Step Assembly, Wiring, BIOS, Windows & Drivers!]](http://i.ytimg.com/vi/vH0e8RKtuPI/mqdefault.jpg)
Mate Ive never built a PC before but watching this has inspired me to have a go! Your tutorial was perfect with explanations clear & concise. Much love from 🇬🇧
Thank you so much for the feedback ♥️🔥 I’m glad it inspired you !
i really appreciate the way you show every little detail , thank you
Appreciate the feedback 🔥I'm glad the little details mattered 😊
Awesome build! 🔥
Thank you so much 🙏🏽
❤❤❤ I've already ordered 9800x3D. Now going to select the rest of components and I personally liked this combo. Awesome build. ❤
Fire PC Build 😮💨🔥 !!!
thanks 🔥🔥🔥
This is great timing, I'm just about to build in the same case and almost identical parts list but i went with a Lian Li theme for both PSU and AIO. Unfortunately, i have to wait till the 50 series is released to complete my build, will have to continue to with my 2018 8gb card until then. Thanks for the video, haven't built since 2020 so help to refresh my memory!
Wouldn’t bother my friend, would be a better idea to purchase an 7900xt or xtx, maybe the gre depending on use case. The 5k series has significantly reduced vram and an overall higher price $1500 for the 5070 I believe and it underperforms compared to current gpu market.
@@Gamer-zt9qknot true at all. 5070 is priced at $549. They kept the same amount of vram as the 40 series for their mid tier cards, which sucks but it was not reduced. The only GPU priced higher than $1,500 is the 5090 at around $1,999. The specs and prices have already been confirmed. 5090 has 32gb VRAM.
Thank you very much for one of the best How To videos. Very informative and detailed. 👌👌
I appreciate the feedback 🔥
Very nice build and excellent attention to details, explaining every step. Earned a sub.
I appreciate the sub ! Thanks 🙏🏼
Yes I agree the 140mm fill the space I run hydroshift aio and have the white lian li evo looks great I actually like it more then the hyte Y70 touch case I had. I just love how everything is lit up and the case looks vibrant and I can see the 5k I spent lol
I completely forgot the EVO RGB can take 140mm 😅 140’s were going to take another week so I couldn’t wait lol
I think the Y70 is nice, but I personally am not a fan of how you can’t see the bottom fans; the touch screen version is what’s tempting lol
yeah i was looking at y70 touch too, but riser needs changing to 5.0 and if you go into bios it gets displayed on the touch screen so if you like to tinker a lot maybe it could be annoying… this evo rgb looks really nice and classy without these complications.
I have the white version of this case and it's absolutely 🔥Awesome build too!
I appreciate the feedback ! The white version is nice but I wish LIAN Li replaced the gray grommets with pure white like they do with the Vision Compact white
@@FIREWOLFTECH Absolutely agree with you on the grey grommets. White grommets would have made the case standout even more
I purchased the 140 individually and these are the best rgb fans on the market i think,i plan on getting 3 120 with controler soon
I agree with you ! The TL and TL LCD look good, but I just hate that they don't have the option for RGB in the middle. I hope Lian Li adds wireless to the Infinity Mirror fans or have a Infinity LCD type.
I'm strongly considering the 140's and doing an update video 😅
Thank you for the clear and detailed video.
You’re welcome ! I appreciate the comment and support 🔥
Perhaps the back clip for adjust the motherboard high mut be rotated because onde side is flat and other side is "rounded", i think the rounded side must be faced to the corner, and the flat side to the center of the rear panel of the motherboard. Ithink if them not rotated then it could be not fit all motherboards dua a little difference in internal space. Great job for explaining all details and how (and why) it must be mounted. Very nice.
What fan do you recommend the most with this build 120mm fan or 140mm?
I am planning on building a pc with this case and i think the best looking combination would be 140mm fans on the bottom and side, a 120mm fan on the back, and a 360mm AIO with 120mm fans on the top
thank you for the details break down on components and taking time to build it
I’m glad you found the details helpful 🔥 I appreciate your feedback
I’m building my second rig (first time building) this Saturday, this is the video that will guide me, thank you 🫡
I’m glad this video can help you out! Happy building! 🔥
how is the cooling performance on the AIO with SL-INF fans? i’m looking to build something like this and it looks great but i was considering leaving original fans without rgb for the radiator as the SLs are not really that great airflow wise.
Hello Hero ;)
I've finished my first PC built following all your steps. It works!!!!! THANK YOU SO MUCH (where is your patreon?!) the lian fans are turning as you said even if nor windows was installed and L connect neither.
Only little one regret : not to have put the mother board on the top position instead of bottom one : it should have been better to put gpu strimer in the bottom of the case.
Last thing I'm wondering... What system should I install now??? Windows 10 pro or 11 pro? And then optimize it? Have you an opinion on that point? (I'm using the PC only for gaming and PC VR quest 3 gaming) Thank you so much
I’m glad this tutorial worked out for you !🔥
The only reason why I personally don’t like GPU Strimmer on bottom is because it blocks air flow versus having it the way I do it. I don’t think it’ll make a dramatic difference, but I just visually see air flow being blocked that way 😅
For Windows, I always use whatever the latest is. I use Windows 11 Home. I looked at the pro but there’s nothing there I would use.
Hope that helps !
Sick build bro! I'm looking to do build something similar, just waiting on the new RTX 5000 series cards.
Thanks bro ! Can’t wait till they launch the 5000 series 🔥
One thing to be clear for those who mount lian li fans that will be driven by L-connect: think of putting them in a logical order (1-2-3-4 in the order in which they are placed in the PC) as well as in the same orientation (connection of the cable in "head" of a block following the "tail" of the previous block) if we want to be able to use later some light effects that pass from one block to another. 🤗
That’s a good tip ! I’ll keep that in mind in future videos and I appreciate you sharing it
I'm happy to help others PC builders like you did for me and proud to be a modest part of your future tips builts 🤗
many thanks for this video
How did u manage to activate the lights on the mother board thoose line lights is there a cable that ım missing
Hello. i've just found that you've built an EVORGB like mine too. So it's even more better than to follow your similar Vision compact built like I was doing first for my built ;) Two questions : in L-Connect, it seems that you has left all your fans of all of your set up under the CPU temperature control... Maybe you haven't finished your settings ? Or is it your choice ? I believed it would be greater to put only radiators fans under CPU control and all the others ones under GPU control ... Am I wrong ? The next question... Your AIO tubes seem to be landing on( or very near) the exhaust hot air of your GPU... Maybe you should put them a little bit away to avoid that the GPU warm the tubes and the water inside ? Or maybe the tubes are well isolated ?Thanks for your great job one more time, you made this perfectly and it REALLY HELP a lot !!! (Like the youtube videos of @"Provoked Prawn" and it's funny to be help by a provoked prawn and a... fire Wolf ;) ;) ;) )
I've got exactly the same motherboard for my next build (waiting until 9950x3d comes out). I've heard that it will be still enough PCIE 5.0 x16 slot working in x8 mode for RTX 50 series (63.015 gb/s bandwidth on PCIE 5.0 x16 is overkill. PCIE 5.0 x8 will have the same bandwidth as PCIE 4.0 x16 has and even 4090 can't cap it). Right now I have two Samsung 990 Pro's (1TB and 2 TB). Should I install on main one windows and other programs, and use 2TB for gaming (Steam library, for example)?
just put in that contact frame with my 7800x3d and THEY ARE FIRE!
Another awesome build... I did ur nzxt h9 elite black build (used x870e nova and 9800X3D) now jus waiting on the RTX 5080/90 to replace my 7800xt gpu
9800x3D plus 5090/80 would be crazy !! I'm glad you followed my guide ❤️🔥
sub + like + comment for the algorithm ,you earned it
I appreciate the support ❤️🔥
great job
Thanks 🔥
011D evo vs H9 Elite, which do you recommend ?
You 3 different software runs at all time for your AIO screen, Fans and LEDs. Do you see how much CPU resources and memory does it uses? Anyway to use all ASUS motherboard to control all with the fan headers, if I bought the ASUS AIO.
You can choose to have the Infinity Fan Hub connected directly to motherboard via ARGB and FAN Pin to let your Motherboard Software control the fans instead.
You could also use the other sets of wires found in the single packs, and connect 4 separate connectors to motherboard if you want to be able to control them separately.
I don’t worry about running multiple software since the CPU and Memory are on the higher end but these are the resources at idle with 9800x3D :
- L-connect 3 ~ 0.4-1% - 180MB
- Kanali ~ 0.8 - 1.8% - 220MB
Armory Crate / Aura Sync / Fan controller is less than 1% and all ASUS programs are about 260MB
I personally use Signalrgb to control my inf-fans, ram, gpu, case and galahad performance´s rgb. Fan-speeds via bios. But i dont think aio´s with displays are supported, but they may do now. I despise every first party sofware.
MSI MAG B650 Tomahawk WiFi Gaming Motherboard (AMD Ryzen 9000/8000/7000 Series Processors, AM5, DDR5, would this mouther board work for this case and those fans you installed i just like the look of the build with those fans
Yeah that motherboard would work ! B650, X670, and X870 should all work for this build on AM5
@FIREWOLFTECH thanks just waiting for my 9800x3d and sapphire nitro + 9700 xtx to get her in 2 weeks
i will build a similar built soon with the rtx 5090. Overall which case do you prefer, the O11 or the NZXT H9 Flow or Elite? thanks in advance
They're both great, but the EVO RGB gives you more options and is easier to remove glass panels. The H9 Elite has an awesome top see through glass panel, so I would recommend side mounting AIO so that you can see the aesthetics of the top mounted fans. The H9 Elite feels more premium and sturdier so I think it depends on which you prefer based on aesthetics and pricing.
I think if you're going for top mounted AIO, then H9 Flow would be a better option. Final note would be 140mm vs 120mm fans, since the EVO RGB allows for triple 140 on bottom, side, and top, I feel like the 140's would look better. ON the H9, having all 120's look more "full"
i just dont understand why all the fans looking same direction ? how will be air ?
yo bro please please please make a video or atleast a short on the settings you use for your strimmer cables or L connect lighting in a whole. I cant get the cables to do the affect you have
I'll add it to my list of future video projects ! But for now, which effect did you want to do on your setup ?
@ the lian li strimmer affect you use where it looks like its giving power to the pc with the different colors flowing
@@FIREWOLFTECHthe stimmer affect you use for the power cable where the colors are flowing and looks like they power it
For that affect; look for "Drizzling" which is found when you have the 3 lines selected. Then you can choose whatever color patterns you want, and set to speed to 25% (or whatever you prefer) and reverse the direction of the effect so that it looks like it's powering.
@ thank you
what program do you use for effects and fan sync?
Check this timestamp : How to Control RGB - 01:31:42
Programs I use is L-Connect 3 for fans / strimmer, Kanali for Panorama AIO, and Armory Crate/Aura Sync for the rest of the components
have a question: Can I install a 420mm radiator with 3x140mm fans at the bottom and 3x140mm fans next to the motherboard? Can I do that? I need an answer, please.”
Yes, this case supports a 420mm radiator but you’ll need to use brackets that are included in the box.
3 x 140 is supported on the side and bottom
@ So, does that mean I can do all of that at the same time?
@@Hussain-wz9te YES YOU CAN DO IT. But test the the clearance with the 2 radiators AND FANs mounted - the lateral mount can be adjusted in depth by rotating it because 120 x 140mm fans and radiators are different, the 140mm are bigger in wide too and it can be conflicted with the default positions of the mounts in the case, and for this reason lian-li provides a method to create more space in depth at the lateral mount, rotating it, it comes to front, and rotating it again, it would be give more depth. If you not test this it can be resulting in superposition one with other, and you "cannot" mount them together or have to less space to mount fittings ore tubes. Just a detail to observe before mounting. But its possible and minded for them.
@@carlosfester Thank you very much for this note!
Every manufacturer should just copy the hydroshift tubes rooting 🤣 would look so much better with that insane screen.
I agree ! I also like how the Vision Compact allows you to route the tubes from behind
Random but where did you get your desk from?
I used a standing desk frame and an ikea counter top. The drawers are IKEA alex d
how does the case compare to the nzxt h9 elite
Both great cases, I like how easy LIAN li makes opening up all the panels. H9 Elite you would need to unscrew the back and then the side glass panel can come off. The front glass also doesn’t come off, where the EVO RGB does, and it’s easy. I will say the H9 Elite feels sturdier and premium.
I prefer how the EVO RGB comes with no fans but the back cable management of the H9 Elite in my opinion is easier to work with. The EVO RGB has more setup options, but the trade off is that the 120mm fans might not look full versus the H9 Elite.
I'm not a gamer but I may one day ( I'm 62), I do alot of 3d printing-slicing with Bambu studio which is CPU, GPU dependent, My current dell is 13 years old Del(R) Core(TM) i7-3770 CPU @ 3.40GHz 3.40 GHz optiplex 9010, I replaced the GPU with a GTX 1060 ( I think it is), whats your recommendation for a new replacement pc? I'm thinking 32-64 gb RAM newer chip, something under 2K.. Thank you. My brother has a Skytech Archangel, he loves it. Something with a modular power supply also.. Thank you.
I’m undecided between the EVO rgb or Vision compact..
both great choices, but if you're planning on vertically mounting GPU, the EVO RGB has way more room
@ Thanks, i currently have the NZXT elite and would like something smaller for my new build. I have the Asus Hero x670e, 9800x3d and 4090 rtx, just need to pick a case.
How is your fan in or out configurations? Is your radiator fans blow the air in or out? From the video it looks like the air blow in to the case. Also the Graphic card has no room for the fan air flows since you make it up. Should just leave it alone.
The way they are setup is :
Top 3 Fans Exhaust
1 Rear Fan Exhaust
3 Side fans Intake
3 Bottom fans Intake
The GPU has a lot of breathing room so no issues there.
I also have 10 Lian Li Uni Fan 120 but my colors are not as vibrant as yours. My colors are kind of dull and inaccurate.
What color are your fans ? white or black
@@FIREWOLFTECH black
In case they were white, the lighting could look a little different.
Since you have the same black ones, it could be your lighting and/or how I set up my camera to capture the video. They look more vibrant when I have no lights on and it helps that my camera captures amazing in low lights. I do also have them set at 100% brightness
@@FIREWOLFTECH ok, tq b
My only criticism is doing any o11 build and not using the lian li edge PSU in it. Those are just made to work together. Solid build otherwise
The edge is awesome ! I used it on the Vision Compact build. The only thing to consider for this EVO RGB using the edge, is to move the PSU to the top position, since there’s not a lot of space on the bottom left 😅
a man you don't have to hit the boxes to present the items that you are using, it actually looks like cheap presentation.
🥺 I’ll note that for next time
I really dislike how Lian Li made their GPU RGB strimer strip. It doesnt look fluid at all and really bugs my OCD. Why couldnt they make it the same width all the way through like the motherboard strip? I really dislike it and thats just my opinion.
The wireless Strimmer version looks more fluid. I’ll be testing those out soon
500€ motherboard & no PCIe quick release 🤣
QVL LISTS ARE OFTEN NOT UP TO DATE, I HAVE EXPERIENCED THIS FOR DECADES!
A KILLER BUILD, BUT WHY USE OLD / SLOWER - USED DRIVES DUDE!?
Not a fan of the streamers, just looks to animae to me.......
I think it depends on the brand and launch date of the motherboard. Either way, for a stress free overclock, QVL list makes it easy and simple to know which are confirmed.
As for the OLD/SLOWER drives, I'm re-using what I currently have for the purpose of making the tutorial. At the moment, PCIe 5.0 is very expensive and not a lot of options. But hopefully I can get a brand to send some to me.
Strimmers are optional so I know some might not like it 😅