Updated Sprint Block | DIY BMX Sprint BLOCK with Measurements

Build yourself a DIY Sprint Block for doing BMX sprints. This tool has been making the rounds and it is quite an upgrade from the previous version I built a few years ago. Sadly, I left mine at the local track and it got picked up so I needed to build a new, BETTER one.
Details for the build:
Total Height = 11"
Bottom 2x6 = 16"
Middle 2x4 = two at 13"
Other middle 2x4 = one at 13", but run on the table saw down to only be 1.25" thick
4x4 = 13.5" long cut at a 14 degree angle
Two drawer glides attach
Top pedal area is 8" long on the top square side

[@chrisedwards2897]

SB4000 love it and the safety sandals

[@TheDriveTrain]

Safety Second (always) 😜.

[@BackyardBMX73]

The guy that makes these is local to me. Great concept and sure beats the high price tag of the plastic one. And if you can DIY, even better.

[@TheDriveTrain]

That's cool he's local to you. I live the DIY life so I just needed time to be on my side to put this together.

[@BackyardBMX73]

@@TheDriveTrain nothing wrong with that!

[@mdacton]

you need the spring and custom paint for sure

[@TheDriveTrain]

Everything always needs to be custom with you 😜

[@jessemuscato]

What did you use to attach everything with? What kind of screws and what did you use to attach the top block to the slides?

[@TheDriveTrain]

Most of it I connected with basic drywall screw. I think the draw glide I used something I had with a wider head. In the end it was just stuff I had around the house.

[@plesbejr570]

hey what the angle of the cutted bottom triangle ?

[@TheDriveTrain]

I checked it and looks like it is 13 degrees