Great Video Man - You nailed it on the thumbnail - Lenovo's are the easiest case swap to do. I modded out a M93p and it turned out pretty great. I right now have a M900 Midtower (6th Gen i7 - SSD- 8 GB Memory) for $125 and the m920s SFF (8th Gen i5, 8GB DDR4, 256 GB NVMe) for $200. They are great because when you do the swap, all you need to do is make sure the Power Button is right, and the CPU Temp Sensor that you can just bring over and hide it in the new case. Getting a USB Adapter for the cases USB 3.0 is nice to have, and of course the adapter for the 24 Pin ATX Power, and that's it!!! No errors!! I think I like Lenovo the best out of the big 3 OEM Companies (Lenny, Dell, HP) Keep up the great work my man!!!
Do you happen to know where I can find the pin layout to do that? I am having a hard time trying to match each pin on the motherboard to that of the case's front audio panel pins.
New case - Amazon: Aerocool Eclipse Mini Tower Case - Aero One PC Gaming Case 4 x 120mm ARGB Fans with 1-6 PC Fan Hub, Mesh Front Tempered Glass Side Panel, Supports Liquid Cooling, Cables Included, White
Did almost the exact same thing except RX 6400 video card, Cooler Master Q300L case and reused the power supply for simplicity. So good at running Fortnite, Spiderman Remastered, Gamepass and Roblox that I have no real justification YET to upgrade the platform.
I got a m720s sff Lenovo office PC. It has an i5 8400 with a 256gb m.2 and 8gb ddr4 memory. It now has a new case and a cheap used 1070ti. I'm only in about 300usd
I am quite new to pc building and case swapping and I'm hoping to do a case swap for an m92p into a thermaltake h17. Will the adapter that you used in this video for the usb port in this video also work for an m92p case swap? Also, I know that you said that you weren't transferring the audio and microphone jacks b/c you didn't have an adapter for it, but are there adapters for those things? Also, does a brand new computer case come with all those pin things that you had to use the diagram from tom's hardware on? Sorry for my lack of pc knowledge but any help would be appreciated. Very well made video and I learned a lot from it.
Hello. Do the adapters work both ways? For example I would like to put a non proprietary mother board in this case and use the stock power supply and front panel connectors. Would I be able to do that? Can you make a video how to do that? My motherboard inside the case has dead ram slots it is Lenovo m93p or something you did a video on it before with the GTX 1060 3gb and the i5 4570. Thank you sir for this cool video. Edit.. I mean I want to put an a320m board in the Lenovo case is it possible?
If you used a new motherboard, i don’t think the adapters would work because they are pinned for the stock board. Unless someone out there makes backwards compatible adapters? I haven’t seen those though
I'm currently doing this on a Lenovo ThinkCentre M900 model into a ThermalTake S200 TG ARGB case. My question is about the ARGB fans, how did you connect them? I am considering using a ARGB Controller for addressing the RGB, using a USB 2.0 port and PSU SATA connections, but how do I provide power to the fans? I am new to ARGB and case-swapping, so any help is much appreciated.
I have a problem I have same pc with i7 4rth gen but when install amd rx 5500 xt or rx 580 it causes hdd usage to 100 percent and when i remove gpu the usage goes back to normal i the past i had no issue with rx 560
Bri thanks for the video, but i need some help, i have a Lenovo thinkcentre M900 with i5 6th and i put in the new case, but when i put the video card the pc haven't video, and without the video card the pc start normal, my video card is a Sapphire RADEON RX 580 4GB, PLEASE HELP 🆘
Next time, Bend the low 3 tabs on the I/O plate. The mobo will hold the plate in. Done the Case swap more times than you are years old. I'm 75 Oct this year
Which header did you use for the hub? I'm doing a m83 sff swap my board has 2 the cpu fan and other one is case fan. I'm thinking about using case fan header. There is also a temp sensor that plugs into the top right of the board and the sensor is placed right under the front fan. How does the motherboard control the case fan? Does it use this external temp sensor?
Isn't it great when things just simply work as intended?!!! :D great video!
Is this guy's channel blacklisted or something - the views DO NOT MATCH the level of high quality content in his videos and on his channel.
I appreciate that man! I hope I get off the YT algorithm black list one day
Great video, I am just in that process and this was really useful. Thanks man!
Did you own an M93p tower as well? How did it go?
Great Video Man - You nailed it on the thumbnail - Lenovo's are the easiest case swap to do. I modded out a M93p and it turned out pretty great. I right now have a M900 Midtower (6th Gen i7 - SSD- 8 GB Memory) for $125 and the m920s SFF (8th Gen i5, 8GB DDR4, 256 GB NVMe) for $200. They are great because when you do the swap, all you need to do is make sure the Power Button is right, and the CPU Temp Sensor that you can just bring over and hide it in the new case. Getting a USB Adapter for the cases USB 3.0 is nice to have, and of course the adapter for the 24 Pin ATX Power, and that's it!!! No errors!! I think I like Lenovo the best out of the big 3 OEM Companies (Lenny, Dell, HP) Keep up the great work my man!!!
10:18 you can use audio separate individual wires with plugs keeping wire colour the same, put one connection at a time on the board
Do you happen to know where I can find the pin layout to do that? I am having a hard time trying to match each pin on the motherboard to that of the case's front audio panel pins.
Loved the video
just a note. I know you build great game puters, no doubt. I have never built 1
New case - Amazon: Aerocool Eclipse Mini Tower Case - Aero One PC Gaming Case 4 x 120mm ARGB Fans with 1-6 PC Fan Hub, Mesh Front Tempered Glass Side Panel, Supports Liquid Cooling, Cables Included, White
Did almost the exact same thing except RX 6400 video card, Cooler Master Q300L case and reused the power supply for simplicity. So good at running Fortnite, Spiderman Remastered, Gamepass and Roblox that I have no real justification YET to upgrade the platform.
Man I just found one in alley no bs worked good just kinda ugly. Your timing is amazing
You know what to do next! Swap that thing!
an s30 lenovo would be awesome case swap video.
I got a m720s sff Lenovo office PC. It has an i5 8400 with a 256gb m.2 and 8gb ddr4 memory. It now has a new case and a cheap used 1070ti. I'm only in about 300usd
I have two of these setups.
gave a like man great vid
I am quite new to pc building and case swapping and I'm hoping to do a case swap for an m92p into a thermaltake h17. Will the adapter that you used in this video for the usb port in this video also work for an m92p case swap? Also, I know that you said that you weren't transferring the audio and microphone jacks b/c you didn't have an adapter for it, but are there adapters for those things? Also, does a brand new computer case come with all those pin things that you had to use the diagram from tom's hardware on? Sorry for my lack of pc knowledge but any help would be appreciated. Very well made video and I learned a lot from it.
Do you have the answer now i need to know
answer to which part?@@ismulazam7631
I turn Lenovo MT Case Swap to Modern set MB to old Lenovo PC Frame, but need to change the Pin to International standard
this is litterally the same pc im tryna bring to 2023
Justo el dia de ayer realice una gestión muy similar y gracias a la recomendación mas que nada de los adaptadores todo salio bien
Can someone help i changed my case out now i get "0135 fan failure" help
Okay i need to ask, do these Lenovo boards support anything else other than the stock cooler that's mounted on the motherboard?
Is there a way to just use the original family pc button in the new case and not use the extra usb on the gaming case?
I did that but I feel something going wrong like the mic sound is lower also the headphones and Idk what to do (:
Hello. Do the adapters work both ways? For example I would like to put a non proprietary mother board in this case and use the stock power supply and front panel connectors. Would I be able to do that? Can you make a video how to do that? My motherboard inside the case has dead ram slots it is Lenovo m93p or something you did a video on it before with the GTX 1060 3gb and the i5 4570. Thank you sir for this cool video. Edit.. I mean I want to put an a320m board in the Lenovo case is it possible?
If you used a new motherboard, i don’t think the adapters would work because they are pinned for the stock board. Unless someone out there makes backwards compatible adapters? I haven’t seen those though
I can't remember the like but there is a adapter out there
I'm currently doing this on a Lenovo ThinkCentre M900 model into a ThermalTake S200 TG ARGB case. My question is about the ARGB fans, how did you connect them? I am considering using a ARGB Controller for addressing the RGB, using a USB 2.0 port and PSU SATA connections, but how do I provide power to the fans? I am new to ARGB and case-swapping, so any help is much appreciated.
That's a nice case do you have a link for it or where can I find it looking to do the same thing
I have a problem I have same pc with i7 4rth gen but when install amd rx 5500 xt or rx 580 it causes hdd usage to 100 percent and when i remove gpu the usage goes back to normal i the past i had no issue with rx 560
So where are the links in the description? Did they age-out or something?
Link of diagram of power connector of lenovo
Need help to change my lenovo ideacentre g5 desktop pc power supply any idea which supports it ?
is it possible to just change the motherboard to a normal one? planning to do that on my thinkcentre
ik this video was over a year ago, but every where i go the case is out of stock do you recommend any other cases?
Hello, can You replace the cpu cooler on this Lenovo motherboard?
I believe you can but it requires some modding
@@RAVisuals ty so much for the answer
P/S You know the M93p and the P300 Are the same board. Go figure.
Je voudrais savoir ou acheter l'adapteur USB 3 svp :)
Bri thanks for the video, but i need some help, i have a Lenovo thinkcentre M900 with i5 6th and i put in the new case, but when i put the video card the pc haven't video, and without the video card the pc start normal, my video card is a Sapphire RADEON RX 580 4GB, PLEASE HELP 🆘
I dont think lenovo suppurts many amd cards
Next time, Bend the low 3 tabs on the I/O plate. The mobo will hold the plate in. Done the Case swap more times than you are years old. I'm 75 Oct this year
Can i put a gtx 1050
This motherboard does not support AMD video card ??
yes!
Got a big like! Can you provide a link to the case?
It’s in the description man!
@@RAVisuals I was expecting the link to be to the top lol. Tks
How did you connect all of the fans?
The case came with a fan hub! Made it super easy
Which header did you use for the hub? I'm doing a m83 sff swap my board has 2 the cpu fan and other one is case fan. I'm thinking about using case fan header.
There is also a temp sensor that plugs into the top right of the board and the sensor is placed right under the front fan. How does the motherboard control the case fan? Does it use this external temp sensor?
Honestamente, detesto viídeos estrangeiros, os caras são muito malas, falam pra caramba, dá reiva.
tudo bem? conseguiu fazer a mudança do gabinete?