I have this same mower. Used it for 3yrs now. Only problem has been the throttle cable. Muffler will melt the plastic cover off the cable but still works. But mine did break this year. Simple fix takes about 10 minutes. Love this mower. Lot better than any Craftsman I have owned. Love the Kohler engines.
I have the same mower. Get ready for a rough ride if you have ground that has bumps in it. The springs are too stiff. I sit on a pillow that is encased inside a plastic bag that has been sealed with clear packing tape. I took off the pulley shields so I can get rid of the grass much easier. I don't step off my mower until the blades come to a stop and the pulleys stop spinning. The grass is hard to get out from under the shields.
Ive got a xt1 46 inch 22hp kholer no problems love it I can cut my 5 acres in no time compared to my old 16 hp kholer Craftsman plenty of deck clearance as well. Xt1 I very durable as it gets twisted and slammed on my rough turf even handles my loaded lawn trailer fine just needs better traction only down fall.
I bought the XT1 42" stamped deck in Aug. 2015, from h.depot, big mistake, got it home discovered one of the deck guide wheels were bent, the generous manager at h.d. gave me$50 buck discount,Lol, I had ordered the bagger for it for another 3 bills, that was a cheap made p.o.s.(one bag ripped,one plastic ear on lid broke off, March of 2021 one of my spindles ripped out of the deck, moisture had gotten between the e coating and the metal causing it to rust, I couldn't tell it until the spindle ripped out then the coating peeled of and exposed all the weak metal, I really like the function of the tractor up until that point ,now I feel like I have been robbed , I forgot to mention mine had a recall on the oil drain hose but the only dealer I could find to fix it, wanted me to leave it parked in my driveway unattended all day while I was at work and they would come by and repair it,I said no thanks, sorry for getting so long winded, but I had to give my experience with this unit which only has 161.6 hrs.on the meter,very disappointed customer.
Very good information. Sorry that your spring broke, that would have really irritated me. I've been thinking about buying one of those and they have real good reviews. So I hope they're not all like that. Thanks for the added info about the spring. I like the big tires on the back of the Case by the way.
I have the same Cub XT1 LT50 (runs great) and I've had the same problem with a broken tension spring. According to the manual and on line the retaining hook goes into the hole neck to the support bracket but the spring exerts too much tension (I can never wrap the belt around the PTO pulley). I added a one inch metal ring between the retaining hook and the spring witch allows me to easily wrap the belt around the PTO and still have very good tension on the belt to drive the mower. It's a design flaw for sure. I'm also sure we are not the only ones that have replaced this tension spring. The 42" and the 46" deck and the manual PTO models have a different spring setup.
@@robludwigsen7831 The belt still has plenty of life left but I had thought that maybe the belt was a tad short. At any rate when that time (changing the belt) I will look into it for sure. Thanks.
What is the size or part number of the blades on your cub cudet lt50 with the press deck I’ve ordered blades and they have been the ones for the weld deck which are a different size blade
Was wondering if the manual shows that spring placement? I had a similar problem with JD tractor where the spring did not break but the belt was installed as its tapered to fit the pulley grooves and it was installed backwards. Now im like you and want to check all the major moving parts for correct installation and of course oil level prior to the first use. JD did not take care of me under warranty as the big box store put the mower together so I had to buy the belt which I believe was $30ish back in the day.
Yes. At the time I just bought the new spring and went to hook it up as the TSC had placed it and realized the belt was way too tight. I looked in the manual and saw that the other hole was the correct spot and it has been fine since.
@@QuickSpeedShop I tried the hole between the two deck support brackets but that gave very little tension (if any) and the belt was way too loose and wouldn't turn the mower blades. I finally ended up adding a one inch metal ring to get good tension on the belt and I can wrap the belt around the PTO pulley.
Lesson learned don't buy from big box, I did before ,first time I cut a blade fell off,30 secs into it had other problems shortly after and the store forgot to send in my warranty, after a year. End of story you can't get good help these days.
$2799 now for the XT1 LT 50 fab deck 24 HP at HD. I had issues with a HD delivery, they tried to deliver a ZT1 50 zero turn that was used but sold as new, complained and bought this tractor instead. Customer care took $499 off, so ended up costing $2300 + tax. Just hope it's not junk. When I receive it, I will be watching it closely before the 30 return window is up. Fingers crossed.
I think that is also a good tractor. I think the 46" has two blades instead of three and the engine is smaller than the one in the 50" cut tractor. I think the rest of it is pretty much identical to this tractor.
@@QuickSpeedShop yea I plan to get the 46inch one with in the next week or 2 and yes it has a 22hp khooler and it has 2 blades and no electric PTO the 50inch one dose has the belt pop off again?
I've got a 2017 model, have put 220+ hours on mine, I use it frequently on my 7+ acres, last season I first detected the hood next to the left cylinder head was deformed from excess heat, right side is ok, I've had to replace the throttle cable assembly 3 times now, nearness to the right cylinder head melts the plastic sheathing and ultimately the cable freezes up, now the reverse is failing to engage, needless to say it's got some problems in the design. Can't talk to cub cadet due to this blasted virus, stayed on chat waiting for 15+ minutes and nobody responded, not a good sign.
good mower.....cub cadet is the best deal out there for the money...or you could buy overhype and a green and yellow paint and get less for thousands more.
I have a 2019 XT2 GX54D, and I broke my spring on one of the times I had the deck off. It happens. After inspecting my spring, I found that there were rubbing marks on it. In your case, it was the first time you turned on the PTO, so you didn't know what it should sound like when it's running properly. In my case, I knew there was a high pitched metallic sound, but I didn't turn it off immediately like I should have. I went for about 30 seconds before breaking it. I ultimately concluded that I had it tangled up with the belt because of the marks. After the deck is installed properly, the spring should be to the rear of the belt. I always check now. There's no definitive view that I could see on your video how the spring was installed. On your video, you can hear the spring make a loud sound at the 9 minute 25 second mark when you're pulling on the belt to get it around the PTO. This suggests that you may have had it tangled with the belt. As a side note, there is a 3/8" square hole that you can insert a 3/8" ratchet into to pull the belt onto the PTO without having to muscle it on. An 18" ratchet works well for me. I also set the deck height so that the hole for the cotter pins is closest to where they mount, so that very little lifting of the deck is actually required. You have good intuitive mechanical skills, plus you make good videos. Otherwise, you did a really good job on the video for not having read the operator's manual!
I also used the ratchet and still can't exert enough pressure to wrap the belt around the PTO pully. That spring is an inch too short or too tough. I have the same Cub XT1 LT50 (runs great) and I've had the same problem with a broken tension spring. According to the manual and on line the retaining hook goes into the hole neck to the support bracket but the spring exerts too much tension (I can never wrap the belt around the PTO pulley). I added a one inch metal ring between the retaining hook and the spring witch allows me to easily wrap the belt around the PTO and still have very good tension on the belt to drive the mower. It's a design flaw for sure. I'm also sure we are not the only ones that have replaced this tension spring. The 42" and the 46" deck and the manual PTO models have a different spring setup.
I have the same Cub XT1 LT50 (runs great) and I've had the same problem with a broken tension spring. According to the manual and on line the retaining hook goes into the hole neck to the support bracket but the spring exerts too much tension (I can never wrap the belt around the PTO pulley). I added a one inch metal ring between the retaining hook and the spring witch allows me to easily wrap the belt around the PTO and still have very good tension on the belt to drive the mower. It's a design flaw for sure. I'm also sure we are not the only ones that have replaced this tension spring. The 42" and the 46" deck and the manual PTO models have a different spring setup.
@@SteelHorseman I ended up getting an XT2 42 for the upgraded trans and fabricated deck (which I think this XT1 50 has, but it was too wide for my storage/fence). $3299 cash before tax. They have 0% financing deals though that pop up.
Yeah well so these are relatively cheap in the US at about $2500-3000. Come to Europe and you'll soon realize they're sold for over 5-6k Euros, which is double the price. No wonder people don't really buy many Cub Cadets here. At this price range you're better off with a Husqvarna which is superior in every aspect.
@@Zach-sg5uu American Husqvarna riding mowers are made in South Carolina and have Briggs & Stratton or Kawasaki engines. Cubs are made in Ohio by MTD and have Briggs & Stratton, Kohler, Kawasaki and Powermore engines
I bought the 46 inch. I was a little disappointed that the max weight rolling pull is only 250 lbs. I too have an old Craftsman GT 6000 High/Low ranges with a 44 inch deck. I have a snowblower on the front. I could never get it to bag but it will pull my cyclone leave rake full and I do not have to worry about breaking the transmission.. Again, 22 HP and its just a big lawnmower
@@eieio6641 To be clear mine has a K58 because it's not a XT1 LT, mine is a XT1 GT 50, I bought the GT50 for that reason. I was going to buy a John Deere but the D170 and180 with the 22"rear tires still only has the K46. I'm not saying the K58 is earth shattering but when I'm paying $3000 for a lawn tractor it better have something better than the K46. My other neighbor has a JD LA175 a pretty big tractor and it has a K46 in it and has lasted over 10 years but mows a small flat yard.
I have the same Cub XT1 LT50 (runs great) and I've had the same problem with a broken tension spring. According to the manual and on line the retaining hook goes into the hole neck to the support bracket but the spring exerts too much tension (I can never wrap the belt around the PTO pulley). I added a one inch metal ring between the retaining hook and the spring witch allows me to easily wrap the belt around the PTO and still have very good tension on the belt to drive the mower. It's a design flaw for sure.
@@QuickSpeedShop They do, and I think I'm buying it this Sat. I think they call it a 11 gauge steel Fab deck. It's $2100 but I need the better deck because I have a lot of roots.
You didn't show how the mower deck is engaged by the cable from the tractor when you installed the mower deck. early in the video you said the mower/tractor was assembled in America it's not the same as made in the USA! and America includes all of south and central America!
First of all, the mower pto is electric. All you do is put the belt on the deck, attach the carrige and mow. Secondly, I get it. No one is more pro USA than me and I try to buy that way whenever possible. In this case I'll take assembled in USA over nothing. Bottom line, I needed a mower, this is what I could afford, it works. I don't work for Cub Cadet, don't get paid by Cub Cadet, I just made a video about a tractor that is literally sold everywhere and tens of thousands of people own. You are more than free to write all your complaints to Cub Cadet or Tractor Supply Company. Hassling me doesn't change where it was made, where the parts come from or anything else related to this or any future Cub Cadet tractor.
@@QuickSpeedShop It’s a good medium duty little faster workhorse! Even though it’s lighter duty. It probably would surprise you on what it can pull some of the time. Plus it’s a very good mower! It’s better than what most people complaining have!😂
Don't worry man. That is just your first cub cadet break down. There will be plenty more in the near future. Better get yourself a real good camera. I'm surprised you did not learn from your 1st cadet. I did. Every time I mow, something breaks. It is designed to break. Look closely at the parts. They are junk.
Been mowing for 2 years now with no problems since the broken spring (which was the fault of whoever put it together at TSC). No complaints, saves me an hour a week, worth the money to me.
All the bearings went out in the deck and the clutch at 36 hours. Took it to the dealership for warranty and they told me they didn’t know if it would be covered or not but he commented how good of shape the mower was in. I told him it was new it only had 36 hours on it and he told me that it would take six weeks to get it fixed. It ended up being 7 1/2 weeks because they couldn’t get the bearings. Hadn’t even had its first oil change. I determined that washing it off after mowing was getting water in the SEALED bearings so now I blow it off with air. 50 hours now, just change the oil, we will see!
@@kuei12 My Cub just died at 17rs old. Never had an issue with it. Probably would have lasted a lot longer if I had taken better care of it. I think all manufactures have lemons occasionally.
@@tomb816 Plastic hoods have nothing to do with performance. In my opinion the cub is better. But an an IH cub Cadet will blow the t240 away. When I use craftsman mowers I get real nervous because Craftsman mowers are what I work on the most Id rather buy a set of wrenches than a lawn mower unless its a gt5000 or lt4000. The old craftsman's were tanks compared to the new ones.
Well its better than the three poorly running, slow, vintage tractors I had. For the money it should last me for a long time. Zero turns are too big for my yard and out of my price range.
Zachariah Woller, Skimask won't tell you *why* its bad, he just *KNOWS* it's bad. Source: Trust me bro. Because talking shit about stuff makes you sound really smart and cool. I'm sure he only mows his half -acre with a $350k Agricultural John Deere because everything else is "cheap garbage". I own the mower in the video. It's good. Maintain it well & it will last. No, you can't abandon it in a field for a decade & fire it back up like a larger tractor. These are perfectly capable for a homeowner. Source: Trust me bro.
I had mine for 8 years and love it. Just checked the price and its almost double.
I have this same mower. Used it for 3yrs now. Only problem has been the throttle cable. Muffler will melt the plastic cover off the cable but still works. But mine did break this year. Simple fix takes about 10 minutes. Love this mower. Lot better than any Craftsman I have owned. Love the Kohler engines.
I appreciate your overview of this mower! Mine seems to have a lot of tork and takes some time getting use to it. Thanks again!
Thanks!
I have the same mower. Get ready for a rough ride if you have ground that has bumps in it. The springs are too stiff. I sit on a pillow that is encased inside a plastic bag that has been sealed with clear packing tape. I took off the pulley shields so I can get rid of the grass much easier. I don't step off my mower until the blades come to a stop and the pulleys stop spinning. The grass is hard to get out from under the shields.
great machine..l got one with about 130hrs on it.no issues.
Excellent mower,got the same one with fabricated deck from tractor supply for $1,650
Jesus! You got a good deal. Got mine for $2,199 a few days ago
I just bought the 2023 XT-1 LT 46 KOHLER 23 HP …. A powerhouse! Cub has been refining these tractors for years. The XT-2 series is for commercial use.
The xt2 is the same exact tractor with upgrades already installed. The xt3 now that's a heavy duty unit but it's twice the price.
The 50 inch also has a K46 transmission instead of the TL-100. Much better for hauling, if you plan on using a cart much.
Ive got a xt1 46 inch 22hp kholer no problems love it I can cut my 5 acres in no time compared to my old 16 hp kholer Craftsman plenty of deck clearance as well. Xt1 I very durable as it gets twisted and slammed on my rough turf even handles my loaded lawn trailer fine just needs better traction only down fall.
I cut all last year now problems as well. I will be getting the tractor back out in a week or so as the grass is growing fast!
I bought the XT1 42" stamped deck in Aug. 2015, from h.depot, big mistake, got it home discovered one of the deck guide wheels were bent, the generous manager at h.d. gave me$50 buck discount,Lol, I had ordered the bagger for it for another 3 bills, that was a cheap made p.o.s.(one bag ripped,one plastic ear on lid broke off, March of 2021 one of my spindles ripped out of the deck, moisture had gotten between the e coating and the metal causing it to rust, I couldn't tell it until the spindle ripped out then the coating peeled of and exposed all the weak metal, I really like the function of the tractor up until that point ,now I feel like I have been robbed , I forgot to mention mine had a recall on the oil drain hose but the only dealer I could find to fix it, wanted me to leave it parked in my driveway unattended all day while I was at work and they would come by and repair it,I said no thanks, sorry for getting so long winded, but I had to give my experience with this unit which only has 161.6 hrs.on the meter,very disappointed customer.
Very good information. Sorry that your spring broke, that would have really irritated me. I've been thinking about buying one of those and they have real good reviews. So I hope they're not all like that. Thanks for the added info about the spring. I like the big tires on the back of the Case by the way.
Thats the only trouble I have had with it in 2 years of ownership
I have the same Cub XT1 LT50 (runs great) and I've had the same problem with a broken tension spring. According to the manual and on line the retaining hook goes into the hole neck to the support bracket but the spring exerts too much tension (I can never wrap the belt around the PTO pulley). I added a one inch metal ring between the retaining hook and the spring witch allows me to easily wrap the belt around the PTO and still have very good tension on the belt to drive the mower. It's a design flaw for sure.
I'm also sure we are not the only ones that have replaced this tension spring. The 42" and the 46" deck and the manual PTO models have a different spring setup.
I've noticed some of the belts are too long from the factory. Also tractor supply kevlar belts are an upgrade.
@@robludwigsen7831 The belt still has plenty of life left but I had thought that maybe the belt was a tad short. At any rate when that time (changing the belt) I will look into it for sure. Thanks.
What is the size or part number of the blades on your cub cudet lt50 with the press deck I’ve ordered blades and they have been the ones for the weld deck which are a different size blade
I don't know the part number or size of the blades. I haven't ever replaced them.
Was wondering if the manual shows that spring placement? I had a similar problem with JD tractor where the spring did not break but the belt was installed as its tapered to fit the pulley grooves and it was installed backwards. Now im like you and want to check all the major moving parts for correct installation and of course oil level prior to the first use. JD did not take care of me under warranty as the big box store put the mower together so I had to buy the belt which I believe was $30ish back in the day.
Yes. At the time I just bought the new spring and went to hook it up as the TSC had placed it and realized the belt was way too tight. I looked in the manual and saw that the other hole was the correct spot and it has been fine since.
@@QuickSpeedShop I tried the hole between the two deck support brackets but that gave very little tension (if any) and the belt was way too loose and wouldn't turn the mower blades. I finally ended up adding a one inch metal ring to get good tension on the belt and I can wrap the belt around the PTO pulley.
I have the same XT1 50" Cub Cadet. ... I'll take your old case over the Cub any day !
My mistake , and yes all XT1's have the K46 except the GT model.
Wow 90% of this lawn tractor is the same as my 20 year old toro 460
It’s still newer
Lesson learned don't buy from big box, I did before ,first time I cut a blade fell off,30 secs into it had other problems shortly after and the store forgot to send in my warranty, after a year. End of story you can't get good help these days.
$2599 is what HomeDepot is now asking for the same mower. Nuts!
Used to be 1600 $ in 2015
$2799 now for the XT1 LT 50 fab deck 24 HP at HD. I had issues with a HD delivery, they tried to deliver a ZT1 50 zero turn that was used but sold as new, complained and bought this tractor instead. Customer care took $499 off, so ended up costing $2300 + tax. Just hope it's not junk. When I receive it, I will be watching it closely before the 30 return window is up. Fingers crossed.
Putting it in the wrong hole will getcha every time!🤘🔥🔥🔥
You know it!!
Had that happen to my new mower also.
Damn. This is now $2200 at Tractor Supply. $1700 was a steal.
That's three years ago. My 2020 was $2099 minus a $100 early season discount. You notice his deck is not fabricated.
Just bought mine in March 2024, just over $3k with tax.
Anyone have an issue with it not wanting to start unless choked even when warmed up?
Good job
And for you Coco Dillo that was when men were men and sheep were scared.
Can you do cold start and update of the tractor please in the spring
Sure, no prob.
awesome cant wait thanks
Awesome I plan to get the 46inch one very soon what do u think
I think that is also a good tractor. I think the 46" has two blades instead of three and the engine is smaller than the one in the 50" cut tractor. I think the rest of it is pretty much identical to this tractor.
@@QuickSpeedShop yea I plan to get the 46inch one with in the next week or 2 and yes it has a 22hp khooler and it has 2 blades and no electric PTO the 50inch one dose has the belt pop off again?
Btw J m pets is my other channel lol
No problem with the belt or spring after I got it mounted in the correct hole. Mowed probably 10 times and it worked great.
@@QuickSpeedShop awesome thanks for letting me know I hope I love my cub cadet ( when I get it ) too
I've got a 2017 model, have put 220+ hours on mine, I use it frequently on my 7+ acres, last season I first detected the hood next to the left cylinder head was deformed from excess heat, right side is ok, I've had to replace the throttle cable assembly 3 times now, nearness to the right cylinder head melts the plastic sheathing and ultimately the cable freezes up, now the reverse is failing to engage, needless to say it's got some problems in the design. Can't talk to cub cadet due to this blasted virus, stayed on chat waiting for 15+ minutes and nobody responded, not a good sign.
I'd like to know if you ever get a response and what they did for you.
good mower.....cub cadet is the best deal out there for the money...or you could buy overhype and a green and yellow paint and get less for thousands more.
How high did you have the blade when you cut the soccer field?
Soccer field?
I have a 2019 XT2 GX54D, and I broke my spring on one of the times I had the deck off. It happens. After inspecting my spring, I found that there were rubbing marks on it. In your case, it was the first time you turned on the PTO, so you didn't know what it should sound like when it's running properly. In my case, I knew there was a high pitched metallic sound, but I didn't turn it off immediately like I should have. I went for about 30 seconds before breaking it. I ultimately concluded that I had it tangled up with the belt because of the marks. After the deck is installed properly, the spring should be to the rear of the belt. I always check now. There's no definitive view that I could see on your video how the spring was installed. On your video, you can hear the spring make a loud sound at the 9 minute 25 second mark when you're pulling on the belt to get it around the PTO. This suggests that you may have had it tangled with the belt. As a side note, there is a 3/8" square hole that you can insert a 3/8" ratchet into to pull the belt onto the PTO without having to muscle it on. An 18" ratchet works well for me. I also set the deck height so that the hole for the cotter pins is closest to where they mount, so that very little lifting of the deck is actually required. You have good intuitive mechanical skills, plus you make good videos. Otherwise, you did a really good job on the video for not having read the operator's manual!
I also used the ratchet and still can't exert enough pressure to wrap the belt around the PTO pully. That spring is an inch too short or too tough.
I have the same Cub XT1 LT50 (runs great) and I've had the same problem with a broken tension spring. According to the manual and on line the retaining hook goes into the hole neck to the support bracket but the spring exerts too much tension (I can never wrap the belt around the PTO pulley). I added a one inch metal ring between the retaining hook and the spring witch allows me to easily wrap the belt around the PTO and still have very good tension on the belt to drive the mower. It's a design flaw for sure.
I'm also sure we are not the only ones that have replaced this tension spring. The 42" and the 46" deck and the manual PTO models have a different spring setup.
When you put the seat down, I believe the engine turned over. I read that too. Is that what happened?
Correct. The seat has a safety pressure switch that kills the engine anytime there isn't weight on the seat.
Case is nice...
I’ve only went through 13 springs since 2017 every year it seems like it breaks once
I have the same Cub XT1 LT50 (runs great) and I've had the same problem with a broken tension spring. According to the manual and on line the retaining hook goes into the hole neck to the support bracket but the spring exerts too much tension (I can never wrap the belt around the PTO pulley). I added a one inch metal ring between the retaining hook and the spring witch allows me to easily wrap the belt around the PTO and still have very good tension on the belt to drive the mower. It's a design flaw for sure.
I'm also sure we are not the only ones that have replaced this tension spring. The 42" and the 46" deck and the manual PTO models have a different spring setup.
These mowers are good for bout 10 years. So I buy a 1200 dollar mower last 10 years. That's 120 dollars a year.
So buy a $4,500 mower that last 20 years? Hint: That's $225 dollars a year.
Unreal to think these are almost $3k now
Yup. That's what inflation and the destruction of the US dollar lead to.
@@QuickSpeedShop I hope we can turn this around. If not, silver lining is I can pay off my mortgage for the future price of a loaf of bread.
Yeah, no kidding!
I got to buy one this week. It has doubled since this video. Thanks Joe!!
@@SteelHorseman I ended up getting an XT2 42 for the upgraded trans and fabricated deck (which I think this XT1 50 has, but it was too wide for my storage/fence). $3299 cash before tax. They have 0% financing deals though that pop up.
Yeah well so these are relatively cheap in the US at about $2500-3000. Come to Europe and you'll soon realize they're sold for over 5-6k Euros, which is double the price. No wonder people don't really buy many Cub Cadets here. At this price range you're better off with a Husqvarna which is superior in every aspect.
The cub cadet is rated higher than the Husqvarna in the US!😂
Perhaps it’s a different market!
@@Zach-sg5uu American Husqvarna riding mowers are made in South Carolina and have Briggs & Stratton or Kawasaki engines. Cubs are made in Ohio by MTD and have Briggs & Stratton, Kohler, Kawasaki and Powermore engines
I bought the 46 inch. I was a little disappointed that the max weight rolling pull is only 250 lbs. I too have an old Craftsman GT 6000 High/Low ranges with a 44 inch deck. I have a snowblower on the front. I could never get it to bag but it will pull my cyclone leave rake full and I do not have to worry about breaking the transmission.. Again, 22 HP and its just a big lawnmower
Yeah with the belt drive to the rear axle you can't pull that much.
U should put a striping kit on it
Gots ta LUV a guy who drives a Studebaker!!!!!
HEY look Ma I know how to run the camera but the tractor? well ain't quite figured that out yet !
And the same 725cc as the 22 horsepower Kohler
What transmission does this have?
Its hydrostatic, belt drive
@@QuickSpeedShop I like it, my neighbor has the 46 inch and he let me use it I want one lol
K58 not K46
@@Starkster50 xt1 lt50 has K46 not K58
@@eieio6641 To be clear mine has a K58 because it's not a XT1 LT, mine is a XT1 GT 50, I bought the GT50 for that reason. I was going to buy a John Deere but the D170 and180 with the 22"rear tires still only has the K46. I'm not saying the K58 is earth shattering but when I'm paying $3000 for a lawn tractor it better have something better than the K46. My other neighbor has a JD LA175 a pretty big tractor and it has a K46 in it and has lasted over 10 years but mows a small flat yard.
Thanks But why want you show us were the spring really goes into...talking bout isn't saying much at all.....Nice Mower!
I have the same Cub XT1 LT50 (runs great) and I've had the same problem with a broken tension spring. According to the manual and on line the retaining hook goes into the hole neck to the support bracket but the spring exerts too much tension (I can never wrap the belt around the PTO pulley). I added a one inch metal ring between the retaining hook and the spring witch allows me to easily wrap the belt around the PTO and still have very good tension on the belt to drive the mower. It's a design flaw for sure.
This mower is now $2099 at Tractor Supply in 2021.
I got a 2017 model with only 36 hours on it for $700 🤙🤙🤙
I just paid 2199 for this 50 inch cut 24 hp and 1700 sounds like a good deal
I'm thinking of getting the same tractor in 50". Does this mower have the Fabricated Deck, that is the one I'm looking to buy hopefully this week.
Mine is the 50", but the deck is stamped. Not sure if they have a fab 50" deck or not as an upgrade.
@@QuickSpeedShop They do, and I think I'm buying it this Sat. I think they call it a 11 gauge steel Fab deck. It's $2100 but I need the better deck because I have a lot of roots.
Yes you can get fabricated and it's much more robust and well worth it ! Mine is a stamped 50" deck but it's all I need.
@@palco22 I did buy the 50” with Fab Deck. It was well worth it and has been a great mower so far. I think I have 170 hours on it now.
I have new xt1 54. And 1978 case 448 wiff vanguard 23 horsepower do not sell case Repower
I don't plan on selling. I want to rebuild the stock Kohler
You didn't show how the mower deck is engaged by the cable from the tractor when you installed the mower deck. early in the video you said the mower/tractor was assembled in America it's not the same as made in the USA! and America includes all of south and central America!
PS it is the way companies try to scam us in to believing that the machine wasn't actually "Made in China"!
First of all, the mower pto is electric. All you do is put the belt on the deck, attach the carrige and mow. Secondly, I get it. No one is more pro USA than me and I try to buy that way whenever possible. In this case I'll take assembled in USA over nothing. Bottom line, I needed a mower, this is what I could afford, it works. I don't work for Cub Cadet, don't get paid by Cub Cadet, I just made a video about a tractor that is literally sold everywhere and tens of thousands of people own. You are more than free to write all your complaints to Cub Cadet or Tractor Supply Company. Hassling me doesn't change where it was made, where the parts come from or anything else related to this or any future Cub Cadet tractor.
@@QuickSpeedShop It’s a good medium duty little faster workhorse!
Even though it’s lighter duty. It probably would surprise you on what it can pull some of the time. Plus it’s a very good mower!
It’s better than what most people complaining have!😂
How much
I don't know what they cost today, I bought this almost 3 years ago. Check Tractor Supply Co. That's where I bought mine.
@@QuickSpeedShop cost is $2599.00
@@adrianfoster8149 Inflation.............Grrrrrrrr!!!!!!!!!!!FJB
I know the video is 2 years old but those tires look kind of over inflated
They're not.
So you messed up putting the spring on wrong then..... "Well 10 feet in to mowing and its broke"!
I didn't put the spring in the wrong hole, the person who put it together at TSC did. The deck was assembled and on the tractor when I bought it.
Well for all that they at least should've Given u the arm rest or bumper
Yeah, right?
Don't worry man. That is just your first cub cadet break down. There will be plenty more in the near future. Better get yourself a real good camera. I'm surprised you did not learn from your 1st cadet. I did. Every time I mow, something breaks. It is designed to break. Look closely at the parts. They are junk.
Been mowing for 2 years now with no problems since the broken spring (which was the fault of whoever put it together at TSC). No complaints, saves me an hour a week, worth the money to me.
@@QuickSpeedShop Just be patient. You will see what I mean.
All the bearings went out in the deck and the clutch at 36 hours. Took it to the dealership for warranty and they told me they didn’t know if it would be covered or not but he commented how good of shape the mower was in. I told him it was new it only had 36 hours on it and he told me that it would take six weeks to get it fixed. It ended up being 7 1/2 weeks because they couldn’t get the bearings. Hadn’t even had its first oil change. I determined that washing it off after mowing was getting water in the SEALED bearings so now I blow it off with air. 50 hours now, just change the oil, we will see!
@@kuei12 My Cub just died at 17rs old. Never had an issue with it. Probably would have lasted a lot longer if I had taken better care of it. I think all manufactures have lemons occasionally.
@@PalmMan77 There are many many complaints with Cub's...except from the sellers.
I just got this one at Home Depot for $1,058 out the door I’m super excited to use it after the snow melts lol
That's a good deal. Mine worked great all season. Looking forward to using it this spring.
What? I see the listed price at $2099.
You didnt buy that mower for $1058 dude.. Hell a 18 horse 42 is $1599
malarkey
To much plastic plastic hoods just not that great the Craftsman T240 blows the Cub Cadet away
What does a plastic hood have to do w/ cutting and general operational performance? Does the grass know the hood is plastic?
@@tomb816 Plastic hoods have nothing to do with performance. In my opinion the cub is better. But an an IH cub Cadet will blow the t240 away. When I use craftsman mowers I get real nervous because Craftsman mowers are what I work on the most Id rather buy a set of wrenches than a lawn mower unless its a gt5000 or lt4000. The old craftsman's were tanks compared to the new ones.
feelsbadman that mower is trash, all those new ones from lowes home depot are. either nice dealer zeroturn or just get a older international
Well its better than the three poorly running, slow, vintage tractors I had. For the money it should last me for a long time. Zero turns are too big for my yard and out of my price range.
What's your reasoning for the mower being bad.
Zachariah Woller its owned by MTD thats why, they use cheap parts
Out of curiosity what parts in particular. I'm considering one for 1000$ with 106 hours on the clock. (its a 2015)
Zachariah Woller,
Skimask won't tell you *why* its bad, he just *KNOWS* it's bad. Source: Trust me bro. Because talking shit about stuff makes you sound really smart and cool. I'm sure he only mows his half -acre with a $350k Agricultural John Deere because everything else is "cheap garbage".
I own the mower in the video. It's good. Maintain it well & it will last. No, you can't abandon it in a field for a decade & fire it back up like a larger tractor. These are perfectly capable for a homeowner. Source: Trust me bro.
MTD bought the cub cadet name. Junk
Um, didnt they buy cub in the 80s lol, also cub is the top selling residential motor