I believe so, because you need to define the area of the mask, and painting on the layer is how you do that. I don't know if that's the only method, but it's only one I know
@@ticklishwasabi ok thanks because when i want to reduce the opacity on the pasted image to have some of the background image be seen it kinda doesnt work when you paint over the background image
You have no idea how much I've been suffering trying to figure this out while I slowly went mad (ToT) (this is coming from someone who went from FireAlpaca to Krita for animations and had NO idea what they are doing :'D)
So this seems to make great sense -- but when my daughter is trying to paint on the clipping mask, the line layer disappears. Is there a setting to make this not happen? Thanks!
Sorry it's taken me so long to respond, but I'm honestly not sure. I guess the important thing to remember is that a clipping mask is sort of like creating a layer but limited the area of it based on the section you've painted. So painting in the clipping mask layer should reveal more area for you to paint within, layers placed above it shouldn't be affected by it, and layers below it (within the same group) should be restrict to the painted area of the mask, but nothing should be disappearing unless you have painted areas in that bottom layer that is located outside of the mask.
It didnt work for me. I tried drawing on the alpha layer in the group and its invisible until i turn off alpha. Then with alpha off its just a normal layer. Kritas learning curve is insane...either that or its broken now!
It's hard to diagnose without looking at it but, is it selecting the lines or the whole canvas? If it's selecting the whole canvas you are probably using the tool on a blank layer, or your lineart is in multiple layers which creates gaps. The selection tools only consider what is on the current layer. There might be a way to change that but I'm not sure. If it's selecting the lines itself you might be accidently clicking on a part of the canvas that isn't actually blank. In this case trying to find a blank enclosed area would be best, but you could also try inverting the selection.
I fixed it now, the tool for me only works with certain brush that doesn’t have a pressure sense for the opacity, maybe it’s because if the opacity is too low it’s considered a gap, so I just gotta use a pure colored brush for the lines
Everything else works expect resizing the imported image , it just says in w.e position it imports and won't move, when i try to move it then it only moves the mask. I am missing something but can't for the life of me figure out what I re watched atleast 8x by now 🤣🤣
The lines from the contiguous selection tool only go away when i go to move the picture but its like its already cut out the image to fit the mask and the rest of the image disappears so i can't move it.
Развлечения
![Eminem - Somebody Save Me (feat. Jelly Roll) [Official Music Video]](http://i.ytimg.com/vi/Vwa0HenQMi4/mqdefault.jpg)
Thank you for the clear instruction without irritating music, robotic voice and unnecessary verbiage. Much appreciated. Liked and subscribed!
Thank you so much for this! Clear and concise without speed reading 😆
I'm glad you found it helpful, thanks for the comment!
You are amazing. It was so tough to find a tutorial that explains the process so well. Thank you so much!
Thanks I'm glad I could help!
this was the exact video I needed, thank you for the clear explanations :)
Straight to the point, top tier tutorial
i came in wanting to figure out how to do a clipping mask and i came out with that and more! Thank you i needed this so much!
Thank you so much this is exactly what I was trying to learn
Great tutorial. Thanks
3k views but this is SUPER USEFUL THANK YOU
It took me TOO LONG to figure this out, Thanky :D
THANK YOU! YOU ARE MY SAVIOUR! GAINED 1 SUB FOR THIS MAN! YOU'RE A STAR!
This video is super helpful, I finally understand how to use mask in Krita.
I use the ctrl+shift+g shortcut in the "Shape" layer and done. Thanks i would lije to see how yoy finish that robot
Thank you boss you saved my school art project
Thanks for this. Much faster than using the wand crop tool and erasing things manually.
Thank you so much, you're a life saver!! :D
Thx very much!! 😊
thank you very much for the tutorial, this video really helped me in using krita👍
Thanks you so much, this is a fast, simple way to explain it, Thank you!
You're welcome!
tysm!!
thank you so much
You are fucking amazing mate! I spent HOURS looking on how to do something like this keep up the good work!
Finally someone explaining it in a way my ADHD can grasp. Thank you!
i normally use the blank background icon beside the eraser tool to avoid lines going outside
thank you sm
Thank you so much!!
I really need a *no keyboards* version lol
If I want a pasted image just be contained within a selected area, do you have to have paint on the initial mask layer before you do a mask group?
I believe so, because you need to define the area of the mask, and painting on the layer is how you do that. I don't know if that's the only method, but it's only one I know
@@ticklishwasabi ok thanks because when i want to reduce the opacity on the pasted image to have some of the background image be seen it kinda doesnt work when you paint over the background image
You have no idea how much I've been suffering trying to figure this out while I slowly went mad (ToT)
(this is coming from someone who went from FireAlpaca to Krita for animations and had NO idea what they are doing :'D)
THANK YOU
Pathfinder!!!
This is old but still thank u so much
You're welcome lol
i know thats pathfinder but my goofy ass cant stop thinking of ultrakill
So this seems to make great sense -- but when my daughter is trying to paint on the clipping mask, the line layer disappears. Is there a setting to make this not happen? Thanks!
Sorry it's taken me so long to respond, but I'm honestly not sure. I guess the important thing to remember is that a clipping mask is sort of like creating a layer but limited the area of it based on the section you've painted. So painting in the clipping mask layer should reveal more area for you to paint within, layers placed above it shouldn't be affected by it, and layers below it (within the same group) should be restrict to the painted area of the mask, but nothing should be disappearing unless you have painted areas in that bottom layer that is located outside of the mask.
My clipping layer is not working??? it literally does not show up whatsoever?
wait nvm it works now
It didnt work for me. I tried drawing on the alpha layer in the group and its invisible until i turn off alpha. Then with alpha off its just a normal layer. Kritas learning curve is insane...either that or its broken now!
i was on the wrong layer
For me when i try the enclosed tool it just selects every line i have not closed areas how do i fix dat?
It's hard to diagnose without looking at it but, is it selecting the lines or the whole canvas? If it's selecting the whole canvas you are probably using the tool on a blank layer, or your lineart is in multiple layers which creates gaps. The selection tools only consider what is on the current layer. There might be a way to change that but I'm not sure. If it's selecting the lines itself you might be accidently clicking on a part of the canvas that isn't actually blank. In this case trying to find a blank enclosed area would be best, but you could also try inverting the selection.
I fixed it now, the tool for me only works with certain brush that doesn’t have a pressure sense for the opacity, maybe it’s because if the opacity is too low it’s considered a gap, so I just gotta use a pure colored brush for the lines
Everything else works expect resizing the imported image , it just says in w.e position it imports and won't move, when i try to move it then it only moves the mask. I am missing something but can't for the life of me figure out what I re watched atleast 8x by now 🤣🤣
The lines from the contiguous selection tool only go away when i go to move the picture but its like its already cut out the image to fit the mask and the rest of the image disappears so i can't move it.
Digital painting is a new work used by humans for art
why is the music in the backgroung is so goddamn creepy
Thank you!