I'm so grateful that you made this video. Despite working full-time and then some, I'm a single parent who's strapped for cash. A dodgy leaking tap that flooded the house whilst I was at work was almost the straw that broke the camels as the saying goes! But thanks to this cheeky chapie's excellent tutorial, I saved myself a fortune on plumbers call out fees and fitted the new taps myself...I'm well Chuffed as I've never done any type of plumbing previously...Many Thanks
yet another superb entertaining video and amazing tips that i will remember when doing DIY plumber works 1) glue is cheap leaks are expensive 2) move the Giraffe out of the way
Another great video! You are on a par with Bradley Walsh for presenting skills, for sure, and should at least be on morning television, have 10 minute slot on one of the programs, giving your plumbing tips to the nation. You could be the Mr Motivator for DIY plumbing enthusiasts!
After subscribing and watching your channel for a few months I have gathered all of the necessary plumbing equipment to completely refit my bathroom and I have spent a few evenings on learning how to plan, bend and solder the pipes as it's arguably the most reliable type of the connection. And after all of that, I can see you using flexis. Well done mate!
Please, please, please take a plumbing show on the road ! You could take a whole set onto the stage and just do your stuff ! You're a natural observational comedian, not a 'too bad' singer and very educating to boot ! I have learned loads from you and saved lots of money doing plumbing jobs for myself ! I even took a dual flush system 'thingy' to bed to work out how to set water levels...say no more, ha ha !
Hi! Only just found these videos as I was looking for some "how to" for removing toilets, basins etc.. ended up watching the whole video! Great work, and thanks for the straight forward tips and information!
Enjoyed the video...Luckily I believe the taps are already installed on the used replacement basin I'm picking up today, the same size as my cracked basin. wish me luck ! PS will obviously get help with the lifting as I'm only little and almost 74 years...!
The video was somewhat helpful but when showing it to my students they all noticed that you had turned the DWV system into a S-trap that would cause self siphoning and result in a sewer gas smell in the household. I was also amazed at the outdoor running of the waste lines. Doesn't work in Canada, just a little too cold!
This would've been great if it came out last month haha, did a little job for my auntie and although it was fine, it could've been better. Doing plumbing at college
Another great video. I’m looking for a smallish bathroom sink with full pedestal , I need to hide stuff so the pedestal must fit almost flush to wall , having a job finding anything. Do they exist. ?
Great video, kitting out my bathroom at the moment so help a lot. Any chance of a video installing a wet room floor? Can't seem to find any decent tutorials on RUclips for this. Cheers
I wonder if you closed off the hole of the old waste pipe, otherwise it would be a direct access route to mice...thank you for the video, very informative!
mate can you come down to New Zealand and install a bath and booster pump off the cylinder for us? good excuse to visit NZ mate, go on please???? lol great videos by the way!
Hi mate I'm English but in the Philippines now got to get a basin off the wall with the retaining bolts well rusted in Any ideas how to remove them easerly I don't mind breaking the bowl to get at them. Has some twit has already broken it Thanks. Just hope u still read these comments or questions 😀
great vid 2:00 yea brass nuts are the best i got 2 new taps and you would think you get what you pay for and it came with shitty bendy plastic nuts ahaha
Great video. I see you don't seal the waste outlet on the inside of the basin. I've always used Plumber's Mait on that side too - why don't you?? I have to replace one and it has silicone around it - just like the Wickes guy does in his video on RUclips - I hate silicone when used inappropriately, it's a pig to remove and I have a feeling that my old waste isn't going to shift with silicone either end!!
Hi, been watching your videos as I'm just starting out. When you say you turned off the hot water from the airing cupboard. Do you mean the gate valve for the cold feed??
There should be a separate isolator to stop the hot water from the cylinder which is supplying the hot water taps. The cold feed he already turned off at the main stop cock.
good video :) i pulled apart a toilet tank behind a stud wall, it was hard work then found a had the wrong flush unit, i thought the pipe from the tank was a standard size of 40mm but the pipe on this one had 50mm pipe :( is this unuseual ?
Thank you , helpful video, just the last part ,when opened tap water, it was very noisy , running water through waste pipe sounds like flashing toilet . it sounds very loud !!!
It's one of the eccentricities we have in the UK. Most of the world prefers mixers but for some reason in the UK we're sticking with separate hot and cold water.
Screws are a more secure robust fixing , silicone shouldn't be used as it either doesn't work on the surface or creates a bad bond which can be difficult in removing
Wow so strange to see a separate hot and cold faucet on one sink, what do you do when you simply want warm water, not hot, not cold? Also exposed hot and cold water lines!! Holly crap even your waste lines are all exposed, is this normal over there???? Good video mate.
Fill the basin with cold and hot water....and it's like magic! WARM WATER! But yeah these taps are old school, mixers are the way forward! SUBSCRIBE! ➡️👉 ruclips.net/user/plumberparts 👈⬅️ IF YOU HAVEN'T ALREADY! 😎
You should have used black waste pipe on the outside of the house as it contains UV protective chemicals to protect againt sunlight but great video overall
*Links to the tools I use everyday here:* www.amazon.co.uk/shop/plumberparts
Plus, follow my *Vlog “TimesWithJames”:* ruclips.net/user/timeswithjames
I'm so grateful that you made this video. Despite working full-time and then some, I'm a single parent who's strapped for cash. A dodgy leaking tap that flooded the house whilst I was at work was almost the straw that broke the camels as the saying goes! But thanks to this cheeky chapie's excellent tutorial, I saved myself a fortune on plumbers call out fees and fitted the new taps myself...I'm well Chuffed as I've never done any type of plumbing previously...Many Thanks
Hi there. That's great to know! Hope all is well now. Regards. PP!
yet another superb entertaining video and amazing tips that i will remember when doing DIY plumber works
1) glue is cheap leaks are expensive 2) move the Giraffe out of the way
Another great video!
You are on a par with Bradley Walsh for presenting skills, for sure, and should at least be on morning television, have 10 minute slot on one of the programs, giving your plumbing tips to the nation.
You could be the Mr Motivator for DIY plumbing enthusiasts!
You can see you love your job. I enjoy your tutorials, you make it look so easy.
After subscribing and watching your channel for a few months I have gathered all of the necessary plumbing equipment to completely refit my bathroom and I have spent a few evenings on learning how to plan, bend and solder the pipes as it's arguably the most reliable type of the connection. And after all of that, I can see you using flexis. Well done mate!
Cheers dude! Glad to see we've helped you out! SUBSCRIBE! ➡️👉 ruclips.net/user/plumberparts 👈⬅️ IF YOU HAVEN'T ALREADY! 😎
Please, please, please take a plumbing show on the road ! You could take a whole set onto the stage and just do your stuff ! You're a natural observational comedian, not a 'too bad' singer and very educating to boot ! I have learned loads from you and saved lots of money doing plumbing jobs for myself ! I even took a dual flush system 'thingy' to bed to work out how to set water levels...say no more, ha ha !
+Nicola Liesel Ha! You can meet us at Installer Show in Coventry this May. PP!
Brill, thanks a bunch chap. Very informative and done with a smile, doesn't get better than that.
Hi! Only just found these videos as I was looking for some "how to" for removing toilets, basins etc.. ended up watching the whole video! Great work, and thanks for the straight forward tips and information!
Great videos for me, a greenhorn. Great Scottish accent!!!!!!!!!.😁
honestly these videos help so much with my revision its amazing!!!!
Love all your videos. Informative, well made and entertaining.
Ah thanks Dave! It means sooo much to know I've helped some people out!
I wish we could find a plumber as good as you. Our plumber did not screw the basins to wall or pedestal the floor
alllll right!! fine ........you have helped me out now a few times and you deserve the like and subscribe more than most
I always use your methods big fan from Morocco plus you so dam funny, thanks i learnt a lot from you >
Watched your videos. Like your attitude and vocal, mate.
Great job. Keep up the same way!
Enjoyed the video...Luckily I believe the taps are already installed on the used replacement basin I'm picking up today, the same size as my cracked basin. wish me luck ! PS will obviously get help with the lifting as I'm only little and almost 74 years...!
Love it! This is a proper bloke! Top job!
great video thanks.
The video was somewhat helpful but when showing it to my students they all noticed that you had turned the DWV system into a S-trap that would cause self siphoning and result in a sewer gas smell in the household. I was also amazed at the outdoor running of the waste lines. Doesn't work in Canada, just a little too cold!
Top Plumber...ney...scientist, bantermaster.
HAHA!
Shanice - I love your smile : quality humming.
Ha! Great choon too! Regards, PP.
Loving it!!
good job
Top geezer - brilliant vid mate.
+Eddie Hawkins Cheers Eddie!
Sub here please>> ruclips.net/user/plumberparts
Great vid bro, but what did you do about old waste hole in wall?
Just found your channel great information and a good laugh love them
Cheers dude!
You have made me want to become a plumber :)
Great sir
Please make more
Sir
Because i have to learn
Thank you, love you
Can you get an air lock and if so how do you sort it thanks great tips
This would've been great if it came out last month haha, did a little job for my auntie and although it was fine, it could've been better. Doing plumbing at college
Another great video. I’m looking for a smallish bathroom sink with full pedestal , I need to hide stuff so the pedestal must fit almost flush to wall , having a job finding anything. Do they exist. ?
Thank you
good video, what sort of fixings would you use if it was a plaster board wall?
What about the ( old waste hole ) in the wall ? Did you leave it open ?
Nice video.
Hi what did you bung the previous waste pipe hole up with?
Great video, kitting out my bathroom at the moment so help a lot. Any chance of a video installing a wet room floor? Can't seem to find any decent tutorials on RUclips for this.
Cheers
Glue is cheap, Leak is expensive..well said.. thanx
are you a plumber?
Very clear info.. Great!
+Doug Newitt Cheers mate!
Wahaay someone shops at tool station by the looks of it ? Haha great video :)
You are the best!!! so good to watch :)
+KR_Oz Cheers bro!
Charming video. Thank u for sharing.. u r a good man☺
Can i ask why you wouldnt put the putty on the upper neck of the plug hole then drop it into the sink , creating the water tight seal there ??
Hi mate,
Are pedestals optional or essential, i have a basin but no pedestal, thanks
I wonder if you closed off the hole of the old waste pipe, otherwise it would be a direct access route to mice...thank you for the video, very informative!
Great videos!
Cheers! Sorry for the delay in replying!
Sub here please➡️👉 ruclips.net/user/plumberparts 👈⬅️If you haven't already!
Damon Albarn does plumbing. Very good Vid mate!
+Envious Fred Ha! cheers!
Always best and interesting
Your good man been watching for stuff ... keep up the great wrk ... I would like to c u do a video on decking to a hard floor
Hi, is there a 42mm push fit to glue adapter or turnaround you can recommend? Top vids you are fooking helary arse...
Great pLumber
mate can you come down to New Zealand and install a bath and booster pump off the cylinder for us? good excuse to visit NZ mate, go on please???? lol great videos by the way!
Hi mate I'm English but in the Philippines now got to get a basin off the wall with the retaining bolts well rusted in
Any ideas how to remove them easerly
I don't mind breaking the bowl to get at them. Has some twit has already broken it
Thanks. Just hope u still read these comments or questions 😀
Nice video , why did you drill a new hole for the waste and not use the old hole? Isn't it a standard 32mm??
It was at the wrong height, too high for trap connection
What is that song you hum at 10:10? Been driving me mad 😂
Shanice - 'I Love Your Smile'
Niceeee !!!
In Romania the cost for a plumber in a day is very biiiigggg !
Can you help me to understand some tips ? Like that .
No one cares how is in Romania
nice video brilliant and helpful
I keep finding myself back these vids lol
could you not have extended the waste pipe to meet the old hole in the wall? would this impact on the drainage? love your videos by the way?
+Mat Otley Can't remeber, it was a while ago and she's not complained!
Another great video. but why would anyone have carpet in a bathroom ??? and how old is that toilet ???
If only it were so easy!!
great video man verry helpful :)
+Luke Edwards Cheers mate! Please sub >> ruclips.net/user/plumberparts
What do you do about the hole left in the wall??
About to replace my first sink. My life is great
Good videos
great vid 2:00 yea brass nuts are the best i got 2 new taps and you would think you get what you pay for and it came with shitty bendy plastic nuts ahaha
Too right mate. Plastic are awful!
If I got the basin how.much would you charge to fit mate ?
I've just had to re do my waste. Do you seal the inside of the drain . Around the rim?
At which point matey?
Great video. I see you don't seal the waste outlet on the inside of the basin. I've always used Plumber's Mait on that side too - why don't you?? I have to replace one and it has silicone around it - just like the Wickes guy does in his video on RUclips - I hate silicone when used inappropriately, it's a pig to remove and I have a feeling that my old waste isn't going to shift with silicone either end!!
Hi, been watching your videos as I'm just starting out.
When you say you turned off the hot water from the airing cupboard. Do you mean the gate valve for the cold feed??
There should be a separate isolator to stop the hot water from the cylinder which is supplying the hot water taps. The cold feed he already turned off at the main stop cock.
hello and thank you for your help but i need to fit my sink now in my toilet from the other sink in the bath bck wall so how can i fit it
Oh my you can fix my plumbing, You are honestly so handsome!!!
WHY THANK YOU! I'm going to pin this comment because I've paid good money for you to make it! (joking!!!)
Specsavers!
Ha ha ;-)
good video :) i pulled apart a toilet tank behind a stud wall, it was hard work then found a had the wrong flush unit, i thought the pipe from the tank was a standard size of 40mm but the pipe on this one had 50mm pipe :( is this unuseual ?
No mate. Sizes are all over the place at the moment!
Did you not fill in the old holes left behind when you remove the waste pipe?
Course I did! Just didn't film it :)
How would you install it if it needed installing on a plasterboard wall?
Thankfulyl as most of the weight is on the pedestal, I'd fix with plasterboard spreading fixings, then glue back. Should be fine!
They teach you a lot of things that you can do
Hold tight. Love you work you are helping me me do my bathroom as I type :-)
I wouldn't put plumbers mait on waste....I always use clear silicone.....what's your take on that??
Clear silicon takes time to dry as compared to the plumbers mate
Thank you , helpful video, just the last part ,when opened tap water, it was very noisy , running water through waste pipe sounds like flashing toilet . it sounds very loud !!!
What about a mixing sink battery?Why are u using single faucetes?
It's one of the eccentricities we have in the UK. Most of the world prefers mixers but for some reason in the UK we're sticking with separate hot and cold water.
what about siliconing the basin to the pedestal ?
Screws are a more secure robust fixing , silicone shouldn't be used as it either doesn't work on the surface or creates a bad bond which can be difficult in removing
How much do you charge for a basin install?
£100 if all goes well.
Darren Freeman $50
Wow so strange to see a separate hot and cold faucet on one sink, what do you do when you simply want warm water, not hot, not cold? Also exposed hot and cold water lines!! Holly crap even your waste lines are all exposed, is this normal over there???? Good video mate.
Fill the basin with cold and hot water....and it's like magic! WARM WATER! But yeah these taps are old school, mixers are the way forward! SUBSCRIBE! ➡️👉 ruclips.net/user/plumberparts 👈⬅️ IF YOU HAVEN'T ALREADY! 😎
What would you do to rectify the old waste hole on the side of the house?
+JetsofSeven Usually a decent mortar job, or if you have some of the old brick about it can look good like that and mortared up too... PP!
Fill it in!!!
what about the wall paper?
Looking a lot less chunky these days PP, cutting out the pies?
It's Magneto.... He has found a new life again.
What happens when I need move my basin on other side of the room
Nice. I have to teach this in a school and have never done it myself before...
Top man/lady! I hope it helped you! 😎
Quality. No appearance from George - but still quality.
Thar basin is a great fit to the pedestal, you can’t get quality like that everyday!
I'm surprised You don't use the "Dudley seal kit"? Just an observation not a criticism.
my nephew is plumber in australia.
Only works in South Africa mate with drain to outside. Please say so next time.
magnifique
You should have used black waste pipe on the outside of the house as it contains UV protective chemicals to protect againt sunlight but great video overall
***** do they! Guess you woukd have to check the specs as I've never come across them, which companies sell them?
I can never tighten the waste like that at 10.19 when im being watched by a koala !! HOLD TIGHT!!!
topside under the rim