WASH BASIN INSTALL - Taps, Plug and Waste pipe
HTML-код
- Опубликовано: 30 июл 2024
- Ever wanted to fit a wash basin? This video will show you how to fit your own wash basin like a boss plumber!
🚀 LEARN PLUMBING ONLINE IN MY STRUCTURED COURSE (50% Before March): www.learnplumbingonline.com
🛠 AMAZON TOOL STORE: www.amazon.co.uk/shop/plumberp...
🥾 10% Off my workboots + workwear Use Plumberparts10: www.bigboots.co.uk/discount/p...
👓 10% Off Safestyle Sunglasses Use PLUMBER10: safestyle.com.au/?ref=PLUMBER10
Learn Plumbing Online is perfect for future apprentices, homeowners who want to understand and tackle more plumbing jobs in the home, handymen who keep turning down the odd plumbing job and more. With practical follow along video lessons and discussion board you can boost your knowledge in my amazing trade. Sign up now: wwwlearnplumbingonline.com
**VISIT OUR SPONSORS**
www.traderadiators.com | www.stuart-turner.co.uk Хобби
*Links to the tools I use everyday here:* www.amazon.co.uk/shop/plumberparts
Plus, follow my *Vlog “TimesWithJames”:* ruclips.net/user/timeswithjames
Excellent video. I really like how you keep your explanations straightforward and relevant.
And as a chippie from the golden age, I applaud you for your attention to quality and longevity 👏
Useful reminder video for a keen amateur like me who only does these jobs occasionally. I tend to use silicon sealant on all the sink fittings where they joint to the ceramic, including the tap and plughole fitting. Where I’ve just trusted to the rubber seals in the past I’ve had problems. I only use plumbers mate on the threaded water pipe fittings. Also on a basin like that a lot of them have a couple of fixing holes for screwing to the wall so you need to get a pair of basin wall fixing screws (a threaded stud with a plastic screw fixing that clamps the basin back to the wall). Once the cabinet and basin are fitted you also need to silicon joint the gap to the wall. I don’t do soldered joints so I either use compression fittings or push fit fittings for copper. I’ve also used plastic pipe with push fit and compression fittings and that is very quick and easy to use. I realise some professional plumbers look down on plastic “ caravan plumbing” but it’s much easier to use and has been reliable for me.
You are a legend, really really helped me out now so much. I only carried on listening to you when I heard you say hold tight a few weeks back as it tickled me but I haven’t stopped watching and educating myself through your videos practicing on my own system & changing, draining, refilling de-sludge rads how to replace inhibitor and adding extra rads how to balance systems for friends and family. Just booked my course. You are ace 👍🏽
How you getting on five years later
Great video, before I put the waste in place I put a bit of insulating tape on the top of the rim above the aperture for the overflow as a guide to make sure that it would be aligned accurately.
I am doing my basic apprenticeship in Luxembourg 🇱🇺 , your videos are quite helpful . In Luxembourg 🇱🇺 plumbing system is quite advanced .
This is gold mate, thank you for making these videos, I’m gonna have a crack this weekend at fitting my new sink. Your tips will definitely save me some time in troubleshooting frustrating leaks !! 👍
Deserves more likes !!
Hi guys hope you enjoy! If you need any help then just comment and REMEMBER to follow me on Instagram here: www.plumberparts.co.uk/social.php?social=Instagram and send me your #PlumbProud and #WildWestWednesday pics!
Great video mate and very helpful and loving your sence of humor as you work and thank you for sharing your wisdom ......
Just fitted my first bathroom tap and plug thingy easy peasy. Thanks mate.
Brilliant tutorials. Helped me out so much. Subscribed, liked and recommended.
Top man, good fun and really informative and great to watch and learn things. Great guy to watch and great to see a bit of humour ....!!! Thank you
Great job and video mate. All the best!
Thanks for this. It is very easy to follow and appreciated.
Great video mate. Just watched that then fitted my own. Cheers 👍
All your videos are very educational. Thanks
that was amazing mate, you made us seem easy and seamless
Thank you so much easy to follow and fun to watch great video
Great videos, mate!! Keep em coming!!
The definition of quality pipework 👌
Brilliant video as usual! Thank you!
Love your content😊
mate these vids are Awesome , it's like proper training, but for free , thanks mate ,
I do really enjoy your videos
Hi their, Can you please do a video on what to do if you've got a cold water lever tap that make a Whooshing noises, love all you tips and videos. Cheers
Can u make a video on how to choose the right size tap faucet an how to put them on your taps please....Love watching ur videos, u make everything look so easy.
I LIKES YOUR VIDEO I M LEARNING PLUMBER WORK THANKS FOR GIVING US KNOWLEDGE
Loving it!!
Very helpful. Thank you.
Hi mate. How would u put pipe clips on if you've already put the hot and cold copper pipes on.
Thank you I'm trying to learn plumbing from your video s thank you
Great video, thanks
Very helpful, thanks
Hi, I've got to connect to an old copper waste pipe, how do I connect a new pvc waste pipe to the copper? Love your videos btw - incredibly helpful!
Thanks mate!
Couldn't agree more about the pipework being neat for future repairs, nothing drives me nuts like service valves facing the back of the unit or drain offs so low you can't attach anything on them!......... Or snots of solder all over the place so it's difficult to cut the pipe where you want, flux left on fittings so they turn green, flexis bent and kinked within an inch of their life, the list is endless.
Can you please do a video on the Bidet Shower Hose install. Used it in japan and they were awesome. Only videos available are US style.
Good job mate. Keep it up.
Cheers dude!
thank for vedio for basin fitting..
How did you connect those two little flexible connector to the pipe? What connectors did you use? In that standard connectors? Love the videos
Can you show how install an under-mount kitchen sink, and where to purchase fittings to hold?
Great vid, if you could clarify when you screwed the two flexi pipes to the tap, are they hand tight? I didnt see how you tightened them?
Have you got any videos on push taps? I’ve got a set of diva ones at the school I work at and the cold side always gets stuck. We had a set of swan taps before that were a nightmare to use as they were always scaling up. The diva ones I can’t seem to get into the workings in the head to either tighten the spring or clean it out.
Very helpful
Do you have any tips for space saving ideas for cloakrooms? I am planning to place a surface sink on top of a WC Unit, the only issue I have is the trap being in the way of the flush unit..
Never seen a mixer tap fitted ,the great vid shows the flexi pipes fitted, is there any way to tighten them, ? as they look like a leak waiting to happen
Diamond vid bud
hi, do you dampen the soldering mat before using? thanks.
Very informative video, i really like those wide grip wrench pliers but couldn't see them on the link unless they have been discontinued..? Cheers
I think a good idea would be to set up your amazon affiliate account to link to tools you use day in day out...
i.e.
- plumbers mait
- you holesaw bits for pipe holes
- flux
- solvent
- makita tools you use.
etc etc - it will all add up.
Good taste in music!
Very nice great guy
Hi . I hope you can help me. I have a falcon combie boiler, it's quite old. The hot water works fine turning on and off on demand.But when i turn the central heating on it fires up and runs for about a minute then the pressure needle climbs quickly to 2 bar and it cuts out! The pressure is one bar from cold, and not losing pressure.any ideas???
What glue do you use to join both pipes together please? And was are those join fittings called also? Thanks
Thanks
I noticed it looks like you ran the tap tails directly onto isolation valves. Is this detrimental to the rubber seals in the tails do you know?
James can u buy a btu device for working btu per room some2 told me there is a device that if u bring it into a room it measures wide by length by height and it works out the btu do u know anything like that or what calculator do u use
What is the purpose of the two exterior side holes (left and right side of sink)? On others there is only one hole towards the bottom side. Links with the overflow but what is it for? Not easy to use the plunge unless one has three hands available
I’m trying to change my basin waste but the basin is already installed against the wall with silicone (nothing else) and there’s no room to use my adjustables to undo that bottom nut? Any suggestions? If thought about tube spanners. but I can’t find one big enough. Help me Sir James.
what parts do you need to fit waterfall taps to a bath
Can you do a vid converting two sink taps into a single mixer?
I noticed you didn’t install a trap underneath the basin (sink), in the US we have to under the sink, is the code in UK different.
Why don’t you use the ‘basin mate’ conical rubber washer to seal the waste?
What about incompatibility between plumbers mate/putty on those non metallic washers?
a question please , at 9:35 instead of soldering , can I use a 90 compression fitting to join the water pipes to the Tap ?
another thing I noticed that there was NO trap fitting for the Waste pipe 🤨
Bravo ! great vid putting the rubber on first is highly recommended lol. You made using plumbers mate look easy, i did it like that and had a leek maybe the pliers i used were not man enough?
That valve looks good and seems easy to install but I can’t find to buy it.
Can you please let me know what is it called so I can search for it.
Taking on my first project and need to keep it as simple as possible.
Many thanks.
Is there any reason why you prefer to use plastic weld waste pipes rather than push fit?
Anything on fitting countertop basin waste?
I have just bought a ceramic basin for the bathroom that just has a hole for the overflow. What sort of trap will I need, is there one where you have a hose that connects the overflow to the trap? I removed the old sink following your videos, first time I have attempted anything like this. The place where I bought the sink from didn't have a clue what I needed!
Where did you get the washer that goes up against the Plumbmate? We can’t find one anywhere 😫
Top man
Is it okay to run a waste pipe upward? It's literally only a very slight incline for about 10cm. The new sink I'm fitting to replace my broken one has a different water trap which sits lower than the waste pipe coming through the wall. So I need to use some corner pipe to bring it down a bit. I'm a programmer not a plumber so I'm doing my best lol
I'm 6'6" tall and would dearly like to have my washbasin 10 or 20 cm higher. Unfortunately the pedestals and cabinets are all a standard height. I don't want a wall hung basin in case I leaned on it getting up. Any suggestions?
Should an S bend be put in the drain to stop potential smell from coming back up through the grey water?
A great video by the master.
Why does my waste look nothing like yours?! It’s a universal for slotted or unslotted sinks. Comes in a few pieces. I’m going to try plumbers mait anyway and see how it goes.
Wish me luck!
Why dont you apply sealer to the top side of the waste fitting?
Plumbers mate. A thing of nightmares. It’s a plumbers enemy
The guy on the video is really handsome his blue eyes 😘😘 and love his accent
very nice
when using one of these to connect a basin waste does the soil pipe smell come up through the plug hole
*It fits description.*
would be better if you'd weld a copper fittings with thread on those copper pipes coming from wall and just bought longer flexi hoses to connect! that way its easier to disconnect and move the cabinet away from wall, otherwise if you need to move the cabinet you have to unsolder the 90deg bends
Hi there, wanted to know why didn't you apply a p trap under the basin
How do you tighten the pipes don’t like the idea of hand tighten pipes under pressure.
Hi i love your videos. As a plumber ive learnt quite a bit as my companies quite limited. Where did you get your grips from please
They're Nerrad bro!
Great video mate, is using compression joints or push fit acceptable, soldering looks a bit scary to me/😕 Thanks, Gavin
It is if you're not a plumber!
U not have a sink trap underneath?
shouldnt the rubber washer be the other way round or doesnt it matter , goin straight upto the plumbers mait ??? plug diagram shows the other way.
Hi where do u get them washers from
Great video. Where do you get that white rubber seal from, the one you put on after you applied the plumbers mate?
Hi how do you have the 2 15mm hot and cold feed go into a mixer tap? Mine has flexi pipes but have low water pressure so trickles out. Thanks
Could be your make of tap, it may need high pressure to operate not like a standard mixer tap
Great video James,there’s so many comments I couldn’t see if the question I want to ask was already asked,I’m referring to the trap think you called it a Mac valve I presume it’s McAlpine it’s like a bottle trap but it’s straight down,I looked on Graham’s plumbing site and couldn’t see one like that.Could you tell me where you obtained one.Thanks Lenny.
ruclips.net/video/XHqCVGuSqyQ/видео.html
Nice man! I know how to fit the taps, but was wondering what I was gonna use on the flexi, to get the nut end on, Inside the recessed tap body, hand tight they are then 👊👊
Agree i always feel safer if i have tightened them just a bit,, also i was always told to put a plugged and tee on the waste in situations like this, not just elbows,I thought the basin would need some mastic to lock it on the worktop, Funny how we all have a slightly different idea,s.
Cheers Jimmy for plumbing tips, your camera work is also beautiful!!! what slide cam do u use? cheers sandy
Looks like a Panasonic HCX1
SDG Electronics cheers
No trap.? Unusual!
If for some reason need to replace the cabinet I must cut the 2 copper line's, that's more hard work for the next one for no reason. You save money and effort but I won't... Right?
Not permitted in Australia,only s&p trap hard connection
Nice