04 Arctic Cat 500 4x4 fix up part 1

Поделиться
HTML-код
  • Опубликовано: 15 окт 2018
  • And instead you introducing a new project on a 04 Arctic Cat 500 show the problems that has will bring it along and show you how to take care of each problem same goes for the Arctic Cat 400

Комментарии • 9

  • @davidfields3098
    @davidfields3098 4 года назад +2

    Have this same rig. Can you do a video on Fixin the speedometer or recommend where to start. . Mine is not registering speed at all. Thanks !

  • @edwardabrahamiii3742
    @edwardabrahamiii3742 2 года назад

    Valve adjustment and itll be easy to pull that puller

  • @theunimportantjesus1398
    @theunimportantjesus1398 2 года назад

    I flipped my 1999 arctic cat 500 and bent the handlebars, smashed the master cylinder, and cracked the odometer housing, so far I think I know all the parts I need but where do I even go to get these parts? Some of these are just confusing to try and look up and it's hard to tell if a part will fit looking at it online

  • @louisfabbo1355
    @louisfabbo1355 2 года назад +1

    HOW DO YOU TAKE THE SEAT OFF

  • @tedbradley8932
    @tedbradley8932 4 года назад

    Can somebody help me solve a problem with my 2004 artic cat 500 .it's starts up but when you give it the gas it's want to stall.i change the coil an spark plug.i clean out the tank ,put regular in it.where do I go from here,any clues?

    • @curt1785
      @curt1785 4 года назад +1

      Have you cleaned the carb on it could be part of the problem.

    • @tedbradley8932
      @tedbradley8932 4 года назад +1

      @@curt1785 I finally got it to run good.clean carb change the gas line.Running good now.Thanks for the help.

    • @curt1785
      @curt1785 4 года назад

      No problem you're welcome

    • @SuperCyril2
      @SuperCyril2 4 года назад

      Valve clearance on these motors are very precise. If a little to tight it will cause the motor to not run properly.