Arctic Cat Carb Cleaning | CBH
HTML-код
- Опубликовано: 19 ноя 2022
- ATV started losing power. It would idle but not accelerate and would pop and backfire when giving it throttle. Basically, running with an extreme lean condition. Removing the carb revealed a severerly clogged idle jet as well as some trash in the main jet. Cleaned them out and it is running back to normal. Enjoy the video, we love your comments and hope you will subscribe to see more. Have a great day and be safe ❤️
Good job on carb cleaning
Thanks for watching and commenting!
Excellent! Thanks for a very detailed description and video of my exact carburetor.
Thank you for watching and your comment! Glad it helped! Have a great day and be safe!
Last night I bought a 2006 400. Hard starting, high idle and won't shift into gear cause of the high idle. After trying to turn down the idle, it backfired and now won't even start. I was thinking it was a carb problem, and after watching this video I do think it is the problem. Going to clean the carb tomorrow. We will find out. Thank you
Thanks for watching and your comment. The idle jet was completely solid from deposits and that sounds exactly how this one was acting. Good luck and hope you get it running good after cleaning it up. Have a great day and be safe!
Thanks for the vid . Alot of helpful info 💯
Thank you for watching and your comment! Have a great day and be safe!
I have the same 2005 500 . Having same issue with throttle cutting out.i suspect bad gas in tank from last winter been sitting without putting stabil in gas cleaned the jets and now in process of putting carb back on.
Excellent job on doing it yourself! I hope that fixes the issue. Thanks for watching and your comment. Let us know how it comes out! Have a great day and be safe!
what about the air/fuel mixture screw and its proper adjustment
Hi, thanks for watching and your comment. The screw should be out from fully seated between 1-2 turns. My understanding is the factory setting is 1-3/4 out. Have a great day and be safe.
Good job!
Thank you for watching and your comment! Have a great day and be safe!
Why would you not replace the rubber gasket just for assurance of a good seal? Or go through the entire carb for that matter while you already had it out?
Thanks for watching and your comment. I cleaned the carb without replacing any parts. My experience is the most common cause is the idle jet clogging up. If you need to replace many parts a Chinese carb from Amazon or Ebay may be the better way to go. YMMV thanks again and have a great day, be safe!
I have an arctic cat 650 h1 and I cannot find any video on RUclips on how to remove the gas tank . There is one video but buddy is running around like a chicken with his head off. Please can someone help
Thanks for watching and your comment. I am not familiar with that model, I will see what I can find out. If it is similar to the 500 I might be able help. Good luck and let us know what you figure out. Have a great day and be safe!
Also, if trash got past the the factory gas filter which is located in the gas tank would it not be advisable to place another filter inline between the gas tank & the carb or between the gas tank & the vacuum operated gas valve diaphragm that's under the seat?
Great idea! Thanks for sharing! Have a great day and be safe!
Is the same for a 650 V2?
Hey thanks for watching and your comment. Yes it should be very similar if not exactly the same. Have a great day and be safe!
Is this the same for a 700 mud pro
Thanks for watching and the question. I’m not positive but should be very similar if not exactly the same. Have a great day and be safe!
Thank you your video was very helpful.