Arctic Cat ATV Chinese Carburetor Fix or Fail?
HTML-код
- Опубликовано: 1 июл 2023
- We had some trouble with our ATV not running. The carb kept overfilling and after changing the float needle the problem continued. We decided to give one of the Chinese carburetors off E-bay a shot and see if that would fix the problem.
My Kimko 07 MXU500 kept leaking petrol from the float valve seat of the carbretter. The new carbretter was $500. The same size carbretter made in China was $40.
It's working very simply and well with only the carburetor exchange.
Same thing as the carbrector you bought. The carbrector without the electric choke.
@@user-fh3rf3uh3s awesome! Thanks for watching and your comment. Ours is still working great as well. Nice saving $460! Have a great day and be safe!
u just put the same carb on my 2004 arctic cat 400 2x4 same brand and it works perfectly. exact same size and everything. pretty happy. ebay 49 bucks
Awesome!! Glad it worked and fixed yours also! Thanks for watching and your comment. We have been using our atv nearly everyday and it’s still working perfectly! Have a great day and be safe!
At about 4:45 the vacant space on the one and hole on the other side of the carburetors is for a manual primer circuit.
Glad to see it worked I'm in the middle of a frame up restoration on my 99 and opted for one of the cheap China models as well. Everything else for that matter from brakes and rotors- wheel bearings. Even the voltage regulator and coil.
Thanks for watching and your comment! Good luck on your restoration, let us know how it turns out. Have a great day and be safe!
I didn't expect that carb to work, I've had zero luck with aftermarket carbs. I've tried them on a few different engines with no success. Good to see there's one out there worth trying.
Thanks for watching and your comment. I wasn’t expecting much but for $50 was worth a shot. So far it’s working great. Fingers crossed that it will keep working. Have a great day and be safe!
good video and job as always the factory parts are way to high. i have a john deere amt600 the kawsuckee engine never ran right you had to walk home more than not replacement motor was over$1600 i let it set over 2 year got a HFT motor moved motor mounts and re done frame paid $100 for long belt and still had less than $600 in it not counting labor and it runs better than it ever did.. take care, be safe and well.
Thank you for watching and commenting. Yeah that carb oem was crazy expensive. The Chinese one is working great so far so hopefully that continues. Thanks again and be safe!
Glad it worked out for you..I need to rebuild mine but looking at the factory parts...they are expensive...maybe ill give an aftermarket carb a try too.On your quad when you shift into low gear does it show an (L)? mine just blinks a line..but mine shows R...N and H..kinda weird.
Thanks for watching and your comment. That carb is working great at barely a fraction of the oem cost. The L does show on ours when it is in low. Good luck and let us know what you find out. Have a great day and be safe!
I bought a carb very similar to yours off Amazon for our '04 500. Idles great, but bogs when you give it throttle and only tops out at about 30 MPH. I'm guessing the jets are the wrong size compared to stock. Hope yours is holding up okay!
Thanks for watching and your comment. Sorry you are having issues with yours. I think you are correct on what is going on though. So far ours is still working perfectly so keeping my fingers crossed that it continues. Let us know what you figure out. Have a great day and be safe!
S the carb still working good for you after sometime
@@randyyool9034 yes, it’s still working perfectly. We use the atv nearly every day and we couldn’t be happier with the way it’s working. Thanks for watching and commenting on it! Have a great day and be safe!
I'm guessing 10 days later wont give you much of a longevity review. Getting a carb for mine in the mail today. Hopefully I get similar results
Yeah, I will update in about 6 months but it’s working great so far! Thanks for watching and your comment, best of luck with yours. Have a great day and be safe!
@@CopperBarnHomestead Well, mine was too lean or too rich with whatever I did. Now it's toast. Do you know which specific one you ordered?
@@MeasureInGrains sorry yours didn’t work correctly. Mine came from Amazon from a company called all-carb. The same ones can be found on EBay and I actually thought that was where I found it. Weird thing when I ordered it was $46 now the price is $65…. Best of luck and hope you get it back to running soon.
@@CopperBarnHomesteadHow's that carb working out for you? Any issues?
@@mrmovemaker9737 it is still working perfectly for us. We use the atv several times a week and it’s running good! Thanks for asking and we hope yours is working too!
Do you have an eBay link for the carb?
Thanks for watching and your comment. I don’t have a link sorry. It was the NICHE carburetor that I used. The same carb was on ebay and amazon for the same price. Ours is still working great. Good luck with yours! Have a great day and be safe!
I just change carburetor to on my Arctic cat and it works very well. But see how long it will last.
Awesome! Yes ours has been working great for several months now hopefully that continues. Good luck and we hope yours keeps working as well! Thanks for watching and commenting and have a great day and be safe!
@@CopperBarnHomestead I just uploaded a video in it
@@basukisugito3275 awesome! We will check it out!
I tried them on lawnmowers I only had one that was not good
Awesome! Thanks for watching and your comment. I know people have had mixed results but I am completely impressed and happy with how this one works! Have a great day and be safe!