I've worked on a D10 blade at my shop. Have yet to work on a D11. May be rare and never work on one. Those push arms are massive. I've done D9 push arms and I'm working on a D8 push arm.
Dont they usually leave the factory, with just blade and ripper to fit on site, ive not seen one stripped down so far, must just for transport issues to China .
Ive only seen 1 D11 at the mineing show, in Las Vegas, 2004, they are huge, boss of Caterpillar was at show too, love to go again, Do you work at the facility, or on mine sites, ?? Must be great job.
Great video! 😎😎 Was wondering who doing the work, but the meticulous way and safety gear used gave it away. Only the Japanese are that meticulous along with the Germans. Looks like Komatsu factory dismantling the D11 and reverse engineering it!! And why not? A smart country like China and Korea would!
Geez I hope that was a refurbed D11. The way they scratched the crap out of the paint work on so many of the parts was disgraceful, and then they just hammered in the pins !! You have to freeze them, then quickly press them in so they seal tight !! Caterpillar would be horrified !! But I guess if you pay them, you can do what you like to it...
Sad. Great subject poorly recorded. Way too close up and fast -- couldn't see what the guys were doing. Plus the crappy too-loud music I had to instantly mute. Better luck next time. Thumb down.
Its encouraging to see that everyone in the world who has any idea of mechanics has respect for the CAT brand...regardless of race or country.
Love driving them! Thanks for build!
If your driving them, then you are not operating them. Just say'n, (40 years Operator)
Thank you so much for showing the Build.
Spettacolare costruzione grande casa costruttrice la caterpillar macchine straordinarie davvero
Wow that machine is a beast. I hold a whole lot of Caterpillar stock. I hope they have a good earnings report on the 30th.
Those rear idlers must take a beating with that high drive pulling on that track
Great assembly job.
Too much people doing nothing. We assemble that in the shop with 3 guys maximum. 4 in the field including crane operator.
just like putting together a giant model kit...that was awesome...
Good luck it's big job thanks for helping your people. Love you
Like putting together a giant tank model
....or even a giant bulldozer model
I've worked on a D10 blade at my shop. Have yet to work on a D11. May be rare and never work on one. Those push arms are massive. I've done D9 push arms and I'm working on a D8 push arm.
I love working on 10 and 11 anything less than that sucks
Great job there guys👍👍👍
What a beautiful beast
Just like Ikea! "Some assembly required" Please tell me these are not being made in China like everything else?
Don't think they're made in China I believe they are still made in the US
The unit might have been sold to a Chinese firm and assembled there.
Very good
Самый лучший бульдозер в мире❤
awesome, greetings from Chanel 🇮🇩
Súper máquina increíble felicitaciones al equipo Ensamblador Reciban afectuoso saludos desde Colombia América del sur.
ຈຍຈ
Aqq ataA
Impressive to see everyone working in close harmony.🇨🇳
Very good job, I love 💕 it too much
D11は超デカイし
カッコ良かねぇ〜😍
昔々、D9に乗ってリッピング&
残土押しをしてたけど
リッパー先のピンを飛ばして
怒られてたなぁ💦
残土は、10tダンプが数十台溜めても楽々押してた、凄いパワーが有るブルでした。😅
amazing
Good ....
Great video...
Is there in Japan?
Is that for sale?
さすがﾌﾟﾛの集団…凄い‼️の一言😍
MASTER MACHINE SUPER STRONG VERY GOOD ! I LIKE !
宮本組さん確か去年まで滋賀土山馬事トレセン工事下請けにやにし建設来てましたよね
Самый красмвый и надежный бульдозкр в мире
I've put a lot of new D11's together, never had that much man power. We do it with six guys, including the crane operator.
Dont they usually leave the factory, with just blade and ripper to fit on site, ive not seen one stripped down so far, must just for transport issues to China .
@@andrewrees8749 They leave the factory on six tractor trailers.
Ive only seen 1 D11 at the mineing show, in Las Vegas, 2004, they are huge, boss of Caterpillar was at show too, love to go again,
Do you work at the facility, or on mine sites, ?? Must be great job.
Awesome q
Like a house on tracks :o)
Desde Nino me gustan las máquinas
ピボットシャフト、ピカピカですね。
70トンクラス二台なら、楽でしょうかね。。
God job 🇧🇷
数あるメーカーのブルの中でD11が1番美しいと思います
Antonmursid🇮🇩🙏🙏🙏🙏🙏
صحيح كات الات موتوقه بس غاليه وتحتاج مشاريع كبيره لكي تجلب دخل .
In what country are these assembled
Great video! 😎😎
Was wondering who doing the work, but the meticulous way and safety gear used gave it away. Only the Japanese are that meticulous along with the Germans. Looks like Komatsu factory dismantling the D11 and reverse engineering it!! And why not? A smart country like China and Korea would!
Eu nem imaginava que seria preciso dois guindastes.
With the dozer blade on it 248,000 lbs. 😮 powered by a C32.
Realmente la Caterpillar D-11 es asombrosa!, buen video!, también me suscribí!
Yoo bu
Beleza muito bom
I thought I was seeing Factory assembly we're seeing jobsite assembly
Caterpillar the best ever
Without the computer codes you can't repair one.
What a beast!
I wonder if they ever mixed up the left from the right tracks? Or does it matter?
It doesn't matter as far as I know. I work on the D9 and the links are symmetrical
👍👍👍👍👍
Awesome
Goot 👍
Yo quiero una de esas
CAT D 11..Super special ipercar... for me. Sure. 👍
Teamwork!!
What a machine...go build China...best wishes...
افضل شي مرسيدس.بعد مرسيدس.يجي السكانية.بعد السكانية تجي الفولفو
caterpilar 82 leme perfekt masihne
sensacional
The Komatsu 575 little stepbrother.
How mach money
Lindo
Why can't cat make all parts out Aloy then be 60% liter than now
So heavy, they have to be delivered in pieces and put together using a crane.
Es la mas grande la d11, ALGUIEN SABE?
Чи ни бульдозер , вот раньше были БУЛЬДОЗЕРЫ !
داير تصنع بلدوزرات كبير ة نتعامل مع شركات صناعة السفن لانهم يتعاملو مع الماكينات الكبير مثل متشي بيتش وهندية الكورية بشراكات مشتركة قصير الاجل او طويل
D11N 야간작업후 새벽에 일어나면 산 하나가 없어지는 마술
대신 하루에 기름을 1200L씩 먹는다는거...
👍👍👍
兵庫 姫路 宮本？
Besai lipan ya to
I don’t have enough money in my life...😢
Wow
Sensacional
Lose the music please.
👍👍👍🇲🇽🇲🇽🇲🇽🇲🇽
👍🏾👍🏾👍🏾👍🏾
It sickens me to see who is building an American Machine!!!!!
ここの会社ってブラック?
Million dollar toy😆
كات احلا مكنات D11
صلو علي رسول الله محمد صلى الله عليه وسلم
What's that got to do with bulldozers?....
Antonmursid🇮🇩🙏🙏🙏🙏🙏
Could you have picked more obnoxious music?
CATERPILLAR
デカい重機の組み立ては一日100万超えるのが分かる💦色々な人やラフター時間も掛かるだろうし…
I see crane operator hand signals are not universal. 🤣
人員主役
Geez I hope that was a refurbed D11. The way they scratched the crap out of the paint work on so many of the parts was disgraceful, and then they just hammered in the pins !! You have to freeze them, then quickly press them in so they seal tight !! Caterpillar would be horrified !! But I guess if you pay them, you can do what you like to it...
Катки без защиты, все камни будут в них!
ك
حملزاد
.
Японские солдаты второй мировой соберают захваченный американский бульдозер.
Πόσο κανη
災害０を目指して。西川実業有限会社
Acco bulldozer
Sad. Great subject poorly recorded. Way too close up and fast -- couldn't see what the guys were doing. Plus the crappy too-loud music I had to instantly mute.
Better luck next time. Thumb down.
Anoying music
Слава украина.