Nissan Navara Mammoth welding project
HTML-код
- Опубликовано: 19 окт 2024
- Nissan Navara are prone to rust or rot in the back chassis under the box or the bed We have put together this video to show some of the rusty chassis and the pre-cut plates you could buy to repair and weld them strengthening the chassis and fixing this problem
Awesome video, I've got a rusted old 4 wheeler and this video helps me finally get it road worthy and finally sell it which was my initial plan
No use welding it all up to leave the rust behind it .cut the rust out man .
Whoever cleaned the frame obviously did alot of work because I know what it takes. That said, before taking the welder to the new steel, you should have grinded down the surrounding metal to bare steel, I think that's part of the reason the welder spark isn't consistent. And before I'd ever start welding, I'd cut out the old rust, put a garden hose to my shop vac, and clean the inside of the frame. I guarantee there's 30 pounds of rust setting inside those frame rails and it sets there collecting moisture. I'm not trying to criticize, but for those of you reading this, take my advice. And for the love of everything, don't spray rubberized undercoating, or bedliner on the frame when your done, it absolutely traps moisture and makes the frame 10x worse a couple years down the road.
Those holes in the new side plates are cut out to weld to the original chassis which you did not weld also you did not weld the top of the plate under the cab .
Welding stronger than factory me thinks not 😂
Good jenias welldon aprished navaid
Razaq your life long laif meri duwa hai
Was their a bird strike ?
😂- better than new...
Good Job!
Have you a link to were you bought these cut templates
I'm doing the same job now, and I though my welds were horrible!
Those welds are terrible
May Allah grant you success
Where do you get those? Pre-cut plates?
Iz koje godine je navara? Trulo kao mozak, užas!
Bonsoir
mais vous avez fais un boulot de merde vous ne découpez meme pas les parties pourries vous n'ajustez meme pas les parties métallique au chassis ,donc vous enfermez a nouveau la rouille dans le chassis ,aucune protection a l'intérieur du chassis ou de la cire corp creux a l'intérieur du chassis , les soudures sont mauvaises les cordons de soudures commence mal et finissent mal un boulot de merde aucune protection sur le chassis au moins un apprêt époxy sulfaté, vous passez de l'anti gravillon noir mais cela ne sert a rien tout est bon a refaire .
Looks legit
👌
Good my son avaid. Razaq and hélper my doughtr Faiza akhter jèete raho love may grend childaran duwa and hamza Allah Khush aur salamat rakhe aameen
Cowboys