No actual comparison here. Would have been nice to see a side by side comparison that tells us 1-2-3 which brand, where to get them (no links to the discs), what's the difference between them, prices, etc. That would have been a comparison.
didnt have time to watch the whole video lol my bad if you mentioned it, i think the purple is silicon carbide, blue is aluminum oxide, and the black might be zirconia or something. might have blue and black switched around. i know the purple is heavy duty, works good on mill scale compared to a flap disc. i use them for particular things especially when i don't wana gouge up the metal. also haha might wana invest in a corded grinder for a project that big haha. have fun man!
Which Ryobi 18v Angle Grinder were you using here. Was it the Brushed? I have two DeWalt 20v (one brushed and one brushless) which I use for cutting tasks. I have the 18v brushless Ryobi 4 1/2 grinder that I use with flap disk and these stripper disks. To avoid having to change out disk I wanted to get a second Ryobi grinder. The Brushed version I can get for about $50… it has the trigger switch rather then the paddle switch (which I actually like). If that is the one you are using, it answers my question, “is it powerful enough to run this strip disks well.” Thanks.
@@carwerks101 Thank you. More than enough power for the jobs I’ll needed to do… and without having carry around and pulling around a 50 or 100 foot extension cord.
I disagree. I rather enjoy it. There are plenty of people with a stick up their arse making vids you can watch if that’s your thing. In all honesty tho I had to watch in 2x speed and still kept FF’ing it lol.
If you all think this guy is weird do yourselves a favor.... do not EVER work for a County government agency!!!!.....this isn't even a drop in the bucket!!!....the SUPERVISORS are about 5 times worse than this guy!
Almost 6 minutes before you even start to use the product. Sorry i wont be subscribing, and will down vote the video. Hopefully you will learn that dragging out your content to get your ads in, will hurt your channel. Plenty of better content creators out there.
![Amazon or 3M? Made in USA 3M Roloc Bristle Discs vs Amazon Competitor [Best Surfacer]](http://i.ytimg.com/vi/YMJWiqwGRhE/mqdefault.jpg)
No actual comparison here. Would have been nice to see a side by side comparison that tells us 1-2-3 which brand, where to get them (no links to the discs), what's the difference between them, prices, etc. That would have been a comparison.
6 minutes in, then he does a demonstration
👍
didnt have time to watch the whole video lol my bad if you mentioned it, i think the purple is silicon carbide, blue is aluminum oxide, and the black might be zirconia or something. might have blue and black switched around. i know the purple is heavy duty, works good on mill scale compared to a flap disc. i use them for particular things especially when i don't wana gouge up the metal. also haha might wana invest in a corded grinder for a project that big haha. have fun man!
Bassicly all performed the same, black was cheap and had shit balance, almost vibrated my hand off
We’re you on drugs when you recorded this? 😂
Lmfaooo it’s awesome 😂
"What's the skateboard for?"
- I needed a dolly to move my banana peels & ball bearings closer to where I was working.
"Ahh, say no more!"
This fool is missing a couple screws...
Have you been sniffing glue.
I think it's something far worse than glue
🤣
I'm glad to have found someone who is as weird and silly as myself.
Your a funny bloke 😆😆😆
That was hard to watch
Thanks!
hahaha best youtube video in a while, zero fucks given, just a guy working & sharing. 👍
Id like to see if one of these poly-abrasives can take impacts from a hammer.
Thank you heart vid
would these be ok to strip paint off a car body without warping the body panel?
Yes. But don't stay too long in one spot, keep the tool moving.
Which Ryobi 18v Angle Grinder were you using here. Was it the Brushed? I have two DeWalt 20v (one brushed and one brushless) which I use for cutting tasks. I have the 18v brushless Ryobi 4 1/2 grinder that I use with flap disk and these stripper disks. To avoid having to change out disk I wanted to get a second Ryobi grinder. The Brushed version I can get for about $50… it has the trigger switch rather then the paddle switch (which I actually like). If that is the one you are using, it answers my question, “is it powerful enough to run this strip disks well.”
Thanks.
Yeah I was using a brushless, def not as powerful as one you plug into the wall but it does basic stuff
@@carwerks101 Thank you. More than enough power for the jobs I’ll needed to do… and without having carry around and pulling around a 50 or 100 foot extension cord.
Even though I lasted 3 minutes this video was a total waste of my time.
Why is this so entertaining?? What a fun personality
The "humor" or "drama" makes the video almost un-watchable. If you just stuck to the subject and left out those theatrics, it would be MUCH better.
I disagree. I rather enjoy it. There are plenty of people with a stick up their arse making vids you can watch if that’s your thing. In all honesty tho I had to watch in 2x speed and still kept FF’ing it lol.
Is that noise from you power tool or are you doing some kind of Gregorian Chant?
Forgot to take medication
need more
A lot of bs before getting to the point
Next time put hepa dust filters on .those filters your wearing are for paint vapors.
What is this you’re woikin on? I’ll have a gander at your other vids to see what it is…
Yes, would have been great to see a side by side. Also the lighting was terrible.
Come film for me 😢
@@carwerks101 What does it pay 🙂🙂🙂
@@malcolmdastur4411 pays with priceless information
@@carwerks101 Okay, but make it a side by side demo.
Black what?
How do you like the sand blaster?
it works great after i added the metering valve to the bottom with a foot pedal
@@carwerks101 Have you tried the Harbor Freight Polycarbonate Abrasive Discs?
Wears respirator when grinding but no dust mask while sand blasting.... Masochist!
Right meow!
Meowwwwwweew
This guy is hilarious. too bad he got so many downvotes.
Ha, I didn’t even realize...
Oh well
Is he on medication
man waisting my time.
Oh dharyl
are all those tweekers near your work rubbing off on you my old friend?
Lay off the sauce
NO!
Keep your day job..
Zachary Hayes Sr 😂
If you all think this guy is weird do yourselves a favor.... do not EVER work for a County government agency!!!!.....this isn't even a drop in the bucket!!!....the SUPERVISORS are about 5 times worse than this guy!
Fire your camera man 😊
Hey,how can I email you? I have a question,but it’s too long to put in the comments section. Keep up the good work! Cheers
Carwerks101@gmail.com
nothing is clear
20 minutes??
But thanks anyway
They all work the same, the end
You can double tab the screen forward or back 10 seconds, very easy to skip the parts you don't want to watch
Too much talking...
boring and nonsense...
My feelings!!
Not informative at all. Sorry.
Don't be sorry :)
Well that was a weird waste of time.
Ur weird
Waaay too much drama
♥️
Almost 6 minutes before you even start to use the product.
Sorry i wont be subscribing, and will down vote the video.
Hopefully you will learn that dragging out your content to get your ads in, will hurt your channel.
Plenty of better content creators out there.
lol gtfo of here
Lay off the drugs
Lmm Cams no