PCB Simulation vs. Real Board - DC Currents and Voltage drop
HTML-код
- Опубликовано: 26 авг 2024
- Comparing results from the real boards with results from a simulation.
Links:
- The Same Simple Board but Different Layouts: • The Same Simple Board ...
- How Hot The PCB Tracks Can Get? • How Hot The PCB Tracks...
- Altium files of the boards: github.com/FED...
- Thermal camera used in the video: • Using Thermal Camera t...
- My Patreon: / robertferanec
------------------------------------------------------
Would you like to support me in what I do? It's simple:
- you will help me a LOT, when you sign up for one of our Schematic and PCB Design online courses at www.fedevel.co...
The other ways to support me in what I do are:
- support me through Patreon page / robertferanec
- sign up for my Udemy course, Learn to Design Your Own Boards www.udemy.com/...
- send me an email and/or leave a positive comment
- watch and like the videos :)
- read my Welldone Blog at www.fedevel.co...
- spread a word about FEDEVEL Academy
It is much appreciated. Thank you,
- Robert
I'm an electronics engineer student from Tunisia, and this channel has a lot of rich and extraordinary lessons and knowledge, I going to refer this channel to my friends. watching your videos on daily basis from now on. keep up the hard work monsieur Robert.
Thank you very much Mehdi
This is awesome!! Thank you for taking the time to make those tests!
Thank you very much Jerome
Simply awesome - Cool Work. Thnx
Thank you very much Shahid
why it burns close to the connections: the wires should help to remove heat, theoretically I would expect it would be colder there. Maybe it has to do with the copper/track thickness variation due to the board manufacturing process, namely the tracks are thinner ==> higher R ==> Higher power dissipated.
Pietro, I still have not found out why. Thanks for your inside.
It is very good lesson!
I don't know why traks burnout in this places, but I notice, that placing power wires close to board edge is bad idea :-)
big like
hi, Robert Feranec. Can y tell me about software ( ex: install, document, ref,...) thank you so much! I'm from Vietnam
Which software are you using for the simulation?
ADS Keysight: www.keysight.com/zz/en/products/software/pathwave-design-software/pathwave-advanced-design-system.html
Thank you
@@RobertFeranec Interesting video, very good!! This sw is it very expensive?
@@massimomantovan8446 Thank you. I asked about price and I didn't get any specific number. But I believe it is not cheap ... my feeling is in thousands - ten thousands
@@RobertFeranec 😱😱... Thanks 😉
hii, thank you so much for such detailed videos. I was however, hoping that the simulation is also able to determine the temperature of the copper tracks from ambient temperature provided by the user, instead of expecting a feedback, as the temperature of copper is dependent on the input current, isnt it?
Thank you Amogh Jain. PS: Yeah, I also thought about that, but I guess it is not so simple to calculate.
hi , could you provide me the way to design walkie talkie pcb and schematic file
and i want to translate your advanced hardware course
hi,Robert Feranec,can U present a video about how sigrity 3Dfem work
I planing to make more simulation videos (maybe also in Sigrity)
@@RobertFeranec perfect!!!