Mr. Guru, that is one beautiful nismo. I don't clean my car as well as you do, but I did give my SVT Focus a thorough wash this morning. Perfect overcast and 50° (F) weather set me up for success. I did a thorough prerinse, and gently removed the gravel dust the car had accumulated while I was back home with a soft scrubber like the one you used for the contact wash. I cleaned and reloaded the mitt after each section to remove the dust. Then I rinsed and went over the whole thing again with a soft microfiber and soap. I dried with some oversize microfibers, and finally gave it a wax. I scrubbed the wheels with a dish brush... My standards aren't as high as yours. The water sheets and rolls right off!
It's known to all how well you clean cars, the narration is top notch, I would really love to see you give away a detail and travel the country, meet the people get a bit of back story!
As much as i would love to see this kind of thing to, as well as a Q&A, i believe he's mentioned in the past that he doesn't do too well with social events and doesn't necessarily enjoy meeting new people. he quite likes his own company and finds car cleaning a great way to spend some time by himself knowing that people aren't going to come and bother him. which i totally understand as I'm the same. i also believe that he doesn't like to give out too much information about himself as he doesn't do any of this for any sort of fame. I genuinely suspect that if it wasn't for the fact that it boosts his views and peoples watch time, he probably wouldn't show his face in his videos, but would rather just have music overlapping the footage. but I get what you're saying, he seems a genuinely good bloke so i would be intrigued to learn more. (if youre reading this CCG, i apologise for talking about you, rather than to you in your own video)
Completely understand what you’re saying. I’m quite fond of car cleaning guru and am just offering some pointers just in case they help or trigger an idea that could expand the channel. It’s not criticism at all, I’d love to see an expert do my car, and rip the piss out of how crap it is!
I always rewatch videos of the guru mobile because while not a huge Z car Nismo nut, there's something very satisfying about looking at your pearlescent whip. Love everything from the candy red wheels to the white lettered rubber: just a really sublime machine.
That is one sweet looking Nismo Joe. Love the contrasting wheels and especially love those Bridgestone applique's on the tires. That really adds a lot of "pop" to the look of the vehicle. I would love to do those applique's on my own 370Z. They look fantastic.
I recently had a chemist that works for a car care company tell me that some products such as washes with some wax, etc. can provide a masking layer over the top of the hydrophobic coating/sealant. So you either need to use a wash that doesn't do this or rinse a lot more than usual or use another more hydrophobic topper to bring back the beads. Having another layer on top isn't a bad thing, it just might affect what you see and make you think the sealant isn't working like it used to when in fact it's just hidden :)
Common knowledge. The issue here is that the coating has failed. It wouldn't make sense for Avalon King to make a shampoo that masks their coatings. Carpro made Reset which helps their coatings. His first rinse (before washing) shows that it failed or almost failed. Guru says that it could be from not having the best application environment, which has some merit to it (not enough for it to fail in 6 months). The coating didn't fail from Guru negligence. I am guessing that it was just the poor quality of this highly marketed coating. However, it is important to note that I have seen this coating do much better so he may have gotten a bad batch (even Carpro makes bad batches occasionally).
@@connersmith2445 Despite your condescending introduction to the comment, the first rinse doesn't show it failing, there could have been any range of contaminants still on it. Many companies make both sealants/coatings and a range of shampoo types so unless it's specifically designed as low residue it will still leave some from many. In any case, reduced hydrophobics doesn't mean it's 'failed', it may be starting to degrade but that doesn't mean there's no protection on the paint left. I have never used AK so I have no idea what is typical for it I'm just saying from a video you can't be conclusive and it may have been something other than the coating degrading, or it may be that.
I tested the AvalonKing Armorshield IX. Not massively impressed with its longevity. Lasted about 4 months before dying, and that's on a fully prepped, very well maintained and pampered vehicle. Its not all it's cracked up to be and the marketing is better than the product IMO. I did an unboxing video, but didn't bother shooting a follow up as it was that underwhelming.
Great video. Nice camera angles and resolution. The foam that shampoo generated seemed a bit thin compared to usual. Unfortunately the products you use on your vids aren’t usually available here in Florida. All good
Hey bud, big shout out from down under! Keep the videos coming…really enjoy the content. Have you tried using super high gsm microfibre towels as your touch wash media? Once soiled it can be put aside and the next panel attacked with a fresh towel. Means no rinsing, just one bucket and easily washable once done. I find big bulky mitts difficult to use and likewise to clean properly. Cheers
I hit my Avalon coating (on the car for 9mo) with a mineral deposit remover and some iron remover, and it brought it back to life without the need for the boost spray. Now mine never fully looked flat like this, but I definitely could tell it had taken a hit prior to the chemical decontamination I performed.
Nice job Guru. Could have been the shampoo clogging up the coating, but even if its the coating it needs to be said that's the trade off for being easy to use
Just bought a new RAM 1500 beautiful black truck, had it Krowned (a rust proofing product applied annually) and now NOT looking forward to a Canadian winter which will leave any vehicle a mess. No chance of moving to Ontario any time soon?
Wash, tar remover, fallout remover, big rinse and dry, re apply ceramic. I wouldn't clay as it may damage the coating and end up having to do a full polish and re coat.
Thank god i went with CarPro Cquartz lite instead of the Avalon. Still going strong after 11 months with no maintenance other than the bi-weekly wash. Gonna topup with CarPro reload in the next month or so..
I've had better results with the turtle wax ceramic spray and graphene spray. I've also tried the Avalon coating and it's pretty bad. About 1 summer of good protection
Most of my vids don’t have music, the last two I added some to cover annoying noise in the background. Next video will likely be a dedicated music vid as I haven’t done one of those since July 😬 but will have a narration only for you after that.
Awesome videos mate, and your wheels come up absolutely amazing! After winter is dealt with I will be having mine coated black on the F10 535.. hope to have them coated nicely to take care of the maintenance side of things. Quick question! Any tips on windscreen wipers? I have tried Shampoo and separately WD40 with cheap microfibres and/or a brush with a good jet wash after. I'm noticing I am still getting a real deep black staining on the cloths when wiping off residue, surely I'm missing something as I'm wasting a cloth each time I do wipers, cant be correct lol.
Rubbers can keep expelling black stuff even after a deep clean, if they’ve been properly cleaned it shouldn’t be dirt but the make up of the material itself so I would just maintain with shampoo.
Great video as always, is there any other ceramic based spray waxes you'd recommend? There seems to be tons on the market now! And I fancy a change from my turtle wax paste wax, it's hard to choose one 😅 lol.
The gloss and the metallic flake really look great. So I take it you're hanging on to the Nismobile? No chance of a Civic Type-R somewhere down the road?
I try and wash it once every two weeks but quite often it’s once a month 😫. Inside doesn’t get very dirty so a thorough vac and wipe down 2 or 3 times a year keeps it pretty straight.
When it comes to coatings this is why I never use anything other than car pro c quartz I think it’s called. I applied that’s bitch 3 years ago, it’s still going strong with the hydrophobicity. Repels dirt easy when I come to wash it as well. One of if not the best on the market in my opinion
Very disappointing results from that coating. Plenty of alternatives in the same price bracket which last 2+ years. Im a coating farm uk registered detailer and we have a coating for the exact same price as the AK which lasts 5 years
To be fair to the coating is was applied in far from ideal conditions and hasn’t been properly maintained since as my car is a bit of a test mule for all manner of different products.
@@CarCleaningGuru completely understandable! Especially if your lobbing all sorts at it before a customers car! Would be interesting to see if it lasted any longer when applied under better conditions!
@@eric2002-e5g I went to Zirconite instead, bloke wanted to charge me £500 for an accreditation course even though I’m already with another brand (IGL) and know how to slap a coating on… bad business if you ask me
Going for BH cleanser polish, then TW seal and shine and top that with Tac System Quartz Max this year for winter. Maybe some wet coat if it’s brass monkeys outside 🥶🤣🤣
Bit disappointed with that Avalon king Ceramic really. I know the car spends all it’s time outside but I’ve got a good 5 months out of TW dry’n’shine with the car open to the elements. I reckon a few coats of Fusso might outperform the Avalon King ceramic.
Just wondering,, any tips to avoid the rust on the discs, (after washing), depositing itself all over the immaculate diamond cut wheels, the first time you go out,,, (even if its a dry sunny day,,,) It's so annoying, after making your pride and joy, all clean and shiny, you return home, to see your lovely black and silver wheels, now covered in brown rusty dust..!!
Pretty poor that the original coating had basically failed by the 6 month mark - seems like a waste of time, money and effort if that's a long as you'll get from it. Plenty of better, easier to apply and cheaper options out there.
Could have easily been clogged as the car lives outside and gets battered with environmental fallout. Didn’t think ahead enough and get a mineral remover which may have sorted it.
@@CarCleaningGuru appreciate the response but seems to be a common theme with this coating when tested by others too. Even those in a more controlled environment showing it doesn't have the same 'legs' as some of the competition.
Clean it off it’s there again a day later 🤷♂️. Thankfully there’s only one small light etching on the entire car which isn’t bad considering the continuous bombardment it gets.
6th Your pride and joy looks great 👌👍 I have my own vehicle coated with Avalon's King IX but that booster wasn't available 2 years ago so I have used Ethos D3FY with it and has been superb too.
@@CarCleaningGuru if that was put up for sale, you’d have all the “youtubers” going mad for that. The ones with the massive audiences. That’s worth a bomb that plate. 💯
It’s deffo worth more than what I paid but aside from a head honcho at RUclips not sure who it would suit as the car guys all seem to have their plate themes sorted already.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Guru and ChrisFix are among the guys on RUclips with some clearly crisp narrations. Keep these videos coming guru 👍🏻
Mr. Guru, that is one beautiful nismo.
I don't clean my car as well as you do, but I did give my SVT Focus a thorough wash this morning. Perfect overcast and 50° (F) weather set me up for success. I did a thorough prerinse, and gently removed the gravel dust the car had accumulated while I was back home with a soft scrubber like the one you used for the contact wash. I cleaned and reloaded the mitt after each section to remove the dust. Then I rinsed and went over the whole thing again with a soft microfiber and soap. I dried with some oversize microfibers, and finally gave it a wax. I scrubbed the wheels with a dish brush... My standards aren't as high as yours. The water sheets and rolls right off!
It's known to all how well you clean cars, the narration is top notch, I would really love to see you give away a detail and travel the country, meet the people get a bit of back story!
As much as i would love to see this kind of thing to, as well as a Q&A, i believe he's mentioned in the past that he doesn't do too well with social events and doesn't necessarily enjoy meeting new people. he quite likes his own company and finds car cleaning a great way to spend some time by himself knowing that people aren't going to come and bother him. which i totally understand as I'm the same. i also believe that he doesn't like to give out too much information about himself as he doesn't do any of this for any sort of fame. I genuinely suspect that if it wasn't for the fact that it boosts his views and peoples watch time, he probably wouldn't show his face in his videos, but would rather just have music overlapping the footage. but I get what you're saying, he seems a genuinely good bloke so i would be intrigued to learn more. (if youre reading this CCG, i apologise for talking about you, rather than to you in your own video)
Completely understand what you’re saying. I’m quite fond of car cleaning guru and am just offering some pointers just in case they help or trigger an idea that could expand the channel. It’s not criticism at all, I’d love to see an expert do my car, and rip the piss out of how crap it is!
I always rewatch videos of the guru mobile because while not a huge Z car Nismo nut, there's something very satisfying about looking at your pearlescent whip. Love everything from the candy red wheels to the white lettered rubber: just a really sublime machine.
Definitely loving this video format of the combination of chill music and your verbose voiceovers
I’ve had my car and van coated with a 5 year Ultimaxx Signature coating. Seems excellent so far.
ngl I would listen this guys asmr his damn voice is so .. calming
That is one sweet looking Nismo Joe. Love the contrasting wheels and especially love those Bridgestone applique's on the tires. That really adds a lot of "pop" to the look of the vehicle. I would love to do those applique's on my own 370Z. They look fantastic.
Fresh Nismo after the wash love it! Well done again boss banging video as always
Love the new style of vid. Found a nice balance between chill music and still getting the nice sound of the work you're doing. Love it!
You got it. Will still have to upload the odd narration only video for the diehards though!
@@CarCleaningGuru I love those too! But I think you found a nice mix here. Thanks for the work man!
Seen this on the M6 the other day, northbound near Leyland. Looked absolutely stunning
Hope I wasn’t driving like an arse 👀.
Yep! guilty; I kept thinking you were missing a spot, I had to clean my screen and rewatch the video. Nice seeing Nismo again, miss Henry.
I recently had a chemist that works for a car care company tell me that some products such as washes with some wax, etc. can provide a masking layer over the top of the hydrophobic coating/sealant. So you either need to use a wash that doesn't do this or rinse a lot more than usual or use another more hydrophobic topper to bring back the beads. Having another layer on top isn't a bad thing, it just might affect what you see and make you think the sealant isn't working like it used to when in fact it's just hidden :)
Likely the case here, just didn’t think ahead as with a lot of my vids they’re last minute.
@@CarCleaningGuru Last minute? Really? Doesn't look like last minute to me, great video again!
Not last minute on the day but in terms of planning and getting thing right in my head yeh.
Common knowledge. The issue here is that the coating has failed. It wouldn't make sense for Avalon King to make a shampoo that masks their coatings. Carpro made Reset which helps their coatings. His first rinse (before washing) shows that it failed or almost failed. Guru says that it could be from not having the best application environment, which has some merit to it (not enough for it to fail in 6 months). The coating didn't fail from Guru negligence. I am guessing that it was just the poor quality of this highly marketed coating. However, it is important to note that I have seen this coating do much better so he may have gotten a bad batch (even Carpro makes bad batches occasionally).
@@connersmith2445 Despite your condescending introduction to the comment, the first rinse doesn't show it failing, there could have been any range of contaminants still on it. Many companies make both sealants/coatings and a range of shampoo types so unless it's specifically designed as low residue it will still leave some from many. In any case, reduced hydrophobics doesn't mean it's 'failed', it may be starting to degrade but that doesn't mean there's no protection on the paint left. I have never used AK so I have no idea what is typical for it I'm just saying from a video you can't be conclusive and it may have been something other than the coating degrading, or it may be that.
I tested the AvalonKing Armorshield IX. Not massively impressed with its longevity. Lasted about 4 months before dying, and that's on a fully prepped, very well maintained and pampered vehicle. Its not all it's cracked up to be and the marketing is better than the product IMO. I did an unboxing video, but didn't bother shooting a follow up as it was that underwhelming.
That car & paint colour are beautiful, especially after a loving detailing session. Top Job & great content!
Always good to see the Nismo (back in one piece!)
Great video. Nice camera angles and resolution. The foam that shampoo generated seemed a bit thin compared to usual. Unfortunately the products you use on your vids aren’t usually available here in Florida. All good
Beautiful car! The pearlescent white is perfect for the 370z. It looks so damn good! Awesome videos as always. Keep'em coming! :D
Hey bud, big shout out from down under! Keep the videos coming…really enjoy the content. Have you tried using super high gsm microfibre towels as your touch wash media? Once soiled it can be put aside and the next panel attacked with a fresh towel. Means no rinsing, just one bucket and easily washable once done. I find big bulky mitts difficult to use and likewise to clean properly. Cheers
I have yet to try the Avalon boost but I have coated a couple cars with their coating. Easiest ceramic coating I've ever applied!
I hit my Avalon coating (on the car for 9mo) with a mineral deposit remover and some iron remover, and it brought it back to life without the need for the boost spray. Now mine never fully looked flat like this, but I definitely could tell it had taken a hit prior to the chemical decontamination I performed.
Yeh I will do the same at some point just so I know either way.
Nice to see the nismobile again after a while.
Nice job Guru. Could have been the shampoo clogging up the coating, but even if its the coating it needs to be said that's the trade off for being easy to use
I dont have a car at moment, so my fathers 2 stroke scooter gets some detailing. I am not a coating guy yet. Great videos
Respect man
That car looks slick 🔥
Noticed the S40 in the background! Still a nice motor that
I was in front of you about 2 weeks ago in a black 2013 Mercedes CLS 250 AMG heading back from New Brighton. Got to say that 370Z looks mint 👍
Thought I would have remembered that but can’t 🤔. I call them “boomerang Mercs” because of the shape.
As usual, great job! I love your car, and I must say that I am liking the way your pants fit. ;-)
Just bought a new RAM 1500 beautiful black truck, had it Krowned (a rust proofing product applied annually) and now NOT looking forward to a Canadian winter which will leave any vehicle a mess. No chance of moving to Ontario any time soon?
Just tried Turtle wax ptfe wax. Great stuff, give it a try guru
Great success. 👌🏻
I’d hit those door jams with that coating as well
What he does not tell anyone is that he will become the Next Richard Attenborough ! Long live the Guru!
Made my day seeing a notification of this vid
You should try Tech 582. It does the job and doesn't cost an arm and a leg.
Nice work on the Nismo.
Any tips on how to stop a cat sitting on bonnet thanks love the page
Big dog!
@@CarCleaningGuru I have one but it's about as useful as a ashtray on a bike
Nice vid guru
Great video. How the hell do you keep the tyre letters clean? Mine were impossible
These nismo's are really nice bro 👌🏻
How would you re-set your ceramic coating? Love your channel 👍
Wash, tar remover, fallout remover, big rinse and dry, re apply ceramic. I wouldn't clay as it may damage the coating and end up having to do a full polish and re coat.
Thank god i went with CarPro Cquartz lite instead of the Avalon. Still going strong after 11 months with no maintenance other than the bi-weekly wash. Gonna topup with CarPro reload in the next month or so..
Did you apply it outside in the sun though and leave the car outdoors overnight is the question!
I reckon this ceramic coating would get outperformed by Tac systems moonlight. Would anybody agree with me?
I applied tac system moonlight on my car back in June, outdoors in direct sunlight, still going strong.
Totally agree!
Yep. No doubt. Plus you get insane water behaviour
Have any of you tried moonlight on your wheels? Does it hold up well?
I've had better results with the turtle wax ceramic spray and graphene spray. I've also tried the Avalon coating and it's pretty bad. About 1 summer of good protection
Love the vids dude! Been watching you for years and was wondering if you could do a video upload without the tunes in the background. Cheers
Most of my vids don’t have music, the last two I added some to cover annoying noise in the background. Next video will likely be a dedicated music vid as I haven’t done one of those since July 😬 but will have a narration only for you after that.
Badman is back. Need to come sooner bro. Getting anxiety
6 days between vids is probably a record for me!
Beautiful car love your videos max from Australia 🇦🇺
used to watch these alot and now just feels like a huge advert for products
And yet I’m still one of the less product review focused channels out there 🤷♂️.
by talking about a product then your reviewing...smh
Very nice, this company is excellent, thank you brother
Great video as always. What would be the lowest temperature you would apply the Avalon king ceramic coating?
10 degrees c but I wouldn’t recommend coating in temps that low unless you have somewhere warmer for it to cure afterwards.
good vibes
Awesome videos mate, and your wheels come up absolutely amazing! After winter is dealt with I will be having mine coated black on the F10 535.. hope to have them coated nicely to take care of the maintenance side of things.
Quick question! Any tips on windscreen wipers?
I have tried Shampoo and separately WD40 with cheap microfibres and/or a brush with a good jet wash after.
I'm noticing I am still getting a real deep black staining on the cloths when wiping off residue, surely I'm missing something as I'm wasting a cloth each time I do wipers, cant be correct lol.
Rubbers can keep expelling black stuff even after a deep clean, if they’ve been properly cleaned it shouldn’t be dirt but the make up of the material itself so I would just maintain with shampoo.
Most wipers will have graphite on them to aid in gliding across the windscreen.
Lovely use of 'hydrophobicity'.
Nice job! 👌the Nismo 370z is a beautiful machine and my dream car though I have ended up with a GR Yaris.
Yours is probably quicker off the line 👀
This is the difference between cheap coatings and quality coatings. My Gtechniq still repels water as good as it did 2 years ago.
I think the difference is conditions in which it was applied. Either that or it’s clogged and needs properly rejuvenating.
@@CarCleaningGuru no be honest, it’s crap
@@LSD04 I didn’t apply it in the conditions it says to apply it nor did I try to unclog or revive it so can’t say that.
Great video as always, is there any other ceramic based spray waxes you'd recommend? There seems to be tons on the market now! And I fancy a change from my turtle wax paste wax, it's hard to choose one 😅 lol.
Damn that Nismo is stunning
That is 1 beautiful car. Love the pearleessnt paint on it
Me too, some say white is boring but pearlescent really comes to life in the right light 😎.
@@CarCleaningGuru yea.as u washed off the suds on boot lid an spoiler. The sun light just dazzled off the paint.
The gloss and the metallic flake really look great. So I take it you're hanging on to the Nismobile? No chance of a Civic Type-R somewhere down the road?
I'm having a nightmare trying to detail my car.... Would you consider having a go, either on or off camera?
I LOVE the background in the intros that speedometer thingy.....where can I get one!?
Tell me what you think it is first 🤔
@@CarCleaningGuru Is it your Nismo's gage cluster?
What about the interior can you use the same product?
Do you use make up brushes for your detailing cleaning?
Nice Noblechair you've got there!!!
is snow foam worth getting? Seems popular but its use seems a bit pointless lol
How often do you usually wash your car?
I give it a decent full inside & out every 2-3 months
I try and wash it once every two weeks but quite often it’s once a month 😫. Inside doesn’t get very dirty so a thorough vac and wipe down 2 or 3 times a year keeps it pretty straight.
Can you tell me where you purchased the attachment on your wheel bucket, I can’t see it in your “products used”?
Yes it’s called a buckanizer. I got it from a German website from what I can remember but should be available elsewhere now.
Lovely car that big man
Cool tires
That is BEAUTIFUL! 🔥
Great video. Well done
The boost product seems odd, it’s not a spray sealant in any way, so I’m wondering why not just apply a full on ceramic, the application is the same.
When it comes to coatings this is why I never use anything other than car pro c quartz I think it’s called.
I applied that’s bitch 3 years ago, it’s still going strong with the hydrophobicity. Repels dirt easy when I come to wash it as well. One of if not the best on the market in my opinion
Do you cover the Nismo on the driveway when not in use?
No I’ve considered it but don’t think it’s worth the hassle as it would only be used directly after a clean for a day or so.
Amazing looking car done nicely 👍
Very disappointing results from that coating. Plenty of alternatives in the same price bracket which last 2+ years.
Im a coating farm uk registered detailer and we have a coating for the exact same price as the AK which lasts 5 years
To be fair to the coating is was applied in far from ideal conditions and hasn’t been properly maintained since as my car is a bit of a test mule for all manner of different products.
Coating farms stuff doesn’t last either… Heard nothing but bad things from them
@@CarCleaningGuru completely understandable! Especially if your lobbing all sorts at it before a customers car!
Would be interesting to see if it lasted any longer when applied under better conditions!
@@jonesyboi6739 they're pretty amazing!
@@eric2002-e5g I went to Zirconite instead, bloke wanted to charge me £500 for an accreditation course even though I’m already with another brand (IGL) and know how to slap a coating on… bad business if you ask me
Shirley....your neighbours know the drill by now😄
Going for BH cleanser polish, then TW seal and shine and top that with Tac System Quartz Max this year for winter. Maybe some wet coat if it’s brass monkeys outside 🥶🤣🤣
Love me some Wet Coat - if diligently applied you can get near same longevity as this one with about 5% of the hassle of application.
Bit disappointed with that Avalon king Ceramic really. I know the car spends all it’s time outside but I’ve got a good 5 months out of TW dry’n’shine with the car open to the elements. I reckon a few coats of Fusso might outperform the Avalon King ceramic.
A few coats of Fusso will outperform most things! It can just be a bit awkward to apply hence why not always going for it.
@@CarCleaningGuru yeah it’s not the most ideal of products to use. Especially if you get a few high spots which go off like concrete! Never fun
Beautiful machine, sir.
Could i get mine detailed by you
I'm assuming that no. plate is just for filming and not real?
For reals.
Nice to nismo is being well looked after
Can anyone recommend a starting kit for someone wanting to get into detailing?
AutoGlanz do a good starter kit. They are decent quality products too and not expensive
Sweet 👌
Just wondering,, any tips to avoid the rust on the discs, (after washing), depositing itself all over the immaculate diamond cut wheels, the first time you go out,,,
(even if its a dry sunny day,,,)
It's so annoying, after making your pride and joy, all clean and shiny, you return home, to see your lovely black and silver wheels, now covered in brown rusty dust..!!
Bilt hamber atom mac 👍🏽
Looks cracking, let's not get to excited about the winter roads and ice just yet .
7000 miles not bad
Excellent video
The silver convertible across the street looks suspiciously e46 M3ish…
No just has M3 wheels.
@@CarCleaningGuru Man it had me excited! Offer him a solid clean for content, those e46’s are old but gold
Free good video, have a free like and a comment to boost the algorithm!
Regards from 🇲🇽🇲🇽🇲🇽
Pretty poor that the original coating had basically failed by the 6 month mark - seems like a waste of time, money and effort if that's a long as you'll get from it. Plenty of better, easier to apply and cheaper options out there.
Probably not the case, see my comment on this
Could have easily been clogged as the car lives outside and gets battered with environmental fallout. Didn’t think ahead enough and get a mineral remover which may have sorted it.
@@CarCleaningGuru appreciate the response but seems to be a common theme with this coating when tested by others too. Even those in a more controlled environment showing it doesn't have the same 'legs' as some of the competition.
Im so suprised you let that bird crap dry into the paint over time
Clean it off it’s there again a day later 🤷♂️. Thankfully there’s only one small light etching on the entire car which isn’t bad considering the continuous bombardment it gets.
Still a style icon (the Nismo , not your good self ) 😂.
I’m deffo a style icon with my Snickers Workwear and colour-coded trainers 👀
good👍
Whoop whoop 😎🤜🏻💥🤛🏻😉
6th
Your pride and joy looks great 👌👍
I have my own vehicle coated with Avalon's King IX but that booster wasn't available 2 years ago so I have used Ethos D3FY with it and has been superb too.
I thought I had paid to remove adverts from RUclips ha ha. Don’t blame you. Take the money.
They won’t be in every video don’t worry!
As boss as the Car is, I’d probably guess that that license plate is worth more than the car.
It’s worth next to nothing as far as I’m aware, just got lucky with it!
@@CarCleaningGuru if that was put up for sale, you’d have all the “youtubers” going mad for that. The ones with the massive audiences. That’s worth a bomb that plate. 💯
It’s deffo worth more than what I paid but aside from a head honcho at RUclips not sure who it would suit as the car guys all seem to have their plate themes sorted already.
Tried to get a quick online valuation a few times but they want your entire life history and I haven’t got time for that.
Currently regretting selling my z watching this