@@nastysoda9212 run over by semi...ridden by me...same difference 🤣 Those new 25s have a makeover don't they? I thought I remember seeing a lot of changes they did
@@RTRrentals check it out and let me know ;) All people asked is lower the tank, maybe 5-10hp more and or a cruise control. They added riding modes, new plastics, new optics and lowered the tank one inch… 🤡
You don't feel the weight if you are in shape. I've stripped over 20lbs off mine and it's quite easy to pick up. Can't believe you still have the cats on there. I went down two teeth in the rear with 520 chain with two extra links to maximize wheelbase for stability, 140 rear tire, full exhaust, flash.
@@braaaaaaaaaaap I've wanted to strip the weight, just haven't done it...oh and the bikes weight too 🤣 On 5miles of hell I had stock sprockets on, just put the plus one sprocket on afterwards, it's a massive difference, can't believe how much so Wanna do the 520 chain too!! Some day 🤣
If you pulled 2 teeth off the back of your bike I doubt you are riding the same type of terrain as Beau. And you oust be in amazing shape to not feel picking up a 400 pound bike 🤷
@@RTRrentals Easiest way to reduce the weight (and the cheapest) is to remove passenger footrest (see passenger footrest eliminator). BTW: to balance front / rear suspension travel you need to get about 40-45% front SAG which I find sub-optimal :/
@@deekox1 can't remove footpegs, that's how my wife and I get to coffee shops and wine bars on my days off :) 🤣 Actually I think some of the best ways is Single front rotor Smaller battery Skinny wheels Abs removal Full exhaust Canister delete -I've only done like a third of these But wanna do more
@@RTRrentals decat + lithium batterie + rear footpegs + short plate holder, you save approx 10-11 kg, crashbar are also heavy and not very useful. I found that the bike almost always fall on the bar and the pegs. Once the bike is down IT IS HEAVY, the guy is out of his mind…
I just bought a '24 T7 Extreme. License plate will arrive late but I am so excited. Mine comes with high fender from stock, but yours is shorter and better looking, where it comes from? I think for my needs the stock suspensions will be fine so the mods i am planning to do are mainly protections (handleguard, plastics and sumpguard) and high mount mivv exhaust. Wheels will be upgraded when i will be more skilled and they will be bent!
@@Luca-u1n that sounds like a sweet setup:) The fender is from a Yamaha super moto. The exact year and model I don't remember, it was listed on camel adv website, you can check out if high fender page and will recommend with fender. I had the Mivv exhaust, the oval with carbon tip, it was a mean sounding exhaust, awesome! But I destroy my mufflers, and now buy camels mufflers cuz they sound just as good but cheaper 😅 When you go to upgrade your wheels, checkout the KKE on eBay. I bought my entire set completely ready built and ready to go for $750 fully shipped here. They've been tough and resilient and has about 8000 miles on them already without a zero problems
Dude thanks for the detailed info on the front single disk. Going to do that change on my T7. I wonder if the 501 front master cylinder brake switch plug works with the Yamaha connector. If I find out I’ll let you know. Thanks man.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
your T7 looks like it's been run over by a semi. I'm coming from dirtbikes and saving to buy a 2025 T7, super excited!
@@nastysoda9212 run over by semi...ridden by me...same difference 🤣
Those new 25s have a makeover don't they? I thought I remember seeing a lot of changes they did
@@RTRrentalsthey added a bunch of useless electronics… 😂
@ I am thumbs downing your comment. Boooooo
@@RTRrentals check it out and let me know ;)
All people asked is lower the tank, maybe 5-10hp more and or a cruise control. They added riding modes, new plastics, new optics and lowered the tank one inch… 🤡
@@RTRrentals check it out, if you consider i am wrong, give me that thumb down 😊
I’m excited to watch this one 😁
@@EverySingleSunday now you can copy me and do what I do 🤣🤪
You don't feel the weight if you are in shape. I've stripped over 20lbs off mine and it's quite easy to pick up. Can't believe you still have the cats on there. I went down two teeth in the rear with 520 chain with two extra links to maximize wheelbase for stability, 140 rear tire, full exhaust, flash.
@@braaaaaaaaaaap I've wanted to strip the weight, just haven't done it...oh and the bikes weight too 🤣
On 5miles of hell I had stock sprockets on, just put the plus one sprocket on afterwards, it's a massive difference, can't believe how much so
Wanna do the 520 chain too!! Some day 🤣
If you pulled 2 teeth off the back of your bike I doubt you are riding the same type of terrain as Beau.
And you oust be in amazing shape to not feel picking up a 400 pound bike 🤷
@@RTRrentals Easiest way to reduce the weight (and the cheapest) is to remove passenger footrest (see passenger footrest eliminator).
BTW: to balance front / rear suspension travel you need to get about 40-45% front SAG which I find sub-optimal :/
@@deekox1 can't remove footpegs, that's how my wife and I get to coffee shops and wine bars on my days off :) 🤣
Actually I think some of the best ways is
Single front rotor
Smaller battery
Skinny wheels
Abs removal
Full exhaust
Canister delete
-I've only done like a third of these
But wanna do more
@@RTRrentals decat + lithium batterie + rear footpegs + short plate holder, you save approx 10-11 kg, crashbar are also heavy and not very useful. I found that the bike almost always fall on the bar and the pegs.
Once the bike is down IT IS HEAVY, the guy is out of his mind…
I just bought a '24 T7 Extreme. License plate will arrive late but I am so excited. Mine comes with high fender from stock, but yours is shorter and better looking, where it comes from? I think for my needs the stock suspensions will be fine so the mods i am planning to do are mainly protections (handleguard, plastics and sumpguard) and high mount mivv exhaust. Wheels will be upgraded when i will be more skilled and they will be bent!
@@Luca-u1n that sounds like a sweet setup:)
The fender is from a Yamaha super moto. The exact year and model I don't remember, it was listed on camel adv website, you can check out if high fender page and will recommend with fender.
I had the Mivv exhaust, the oval with carbon tip, it was a mean sounding exhaust, awesome! But I destroy my mufflers, and now buy camels mufflers cuz they sound just as good but cheaper 😅
When you go to upgrade your wheels, checkout the KKE on eBay. I bought my entire set completely ready built and ready to go for $750 fully shipped here. They've been tough and resilient and has about 8000 miles on them already without a zero problems
Are you the same guy or related to the nutter who has the off-road 'busa? The resemblance is uncanny!
@@broncoridesagain3176 Offroad busa dude is so cool. I wish 🤣
@@RTRrentals he's a wild man! Loving these vids, the FMH vid was awesome.
@@broncoridesagain3176 that's Matt spears with the Goldwing vids too right?
Dude thanks for the detailed info on the front single disk. Going to do that change on my T7. I wonder if the 501 front master cylinder brake switch plug works with the Yamaha connector. If I find out I’ll let you know. Thanks man.
@ hope it works for ya! And your welcome :)