Yes, this is a truck bearing, a tapered roller bearing. Small bearings are generally used in motors and pumps. The large ones are all in heavy machinery, and the large bearings that require strong gravity generally choose double-row angular contact ball bearings. Most of the small ones are spherical bearings. Because it requires high-intensity operation.
Bad idea, you dont want to introduce any hard contaminants on the bearing rollers also the installation was improper. I know it probably works most of the times but why introduce potential cause of failure.
nah mate wheel bearings need to be lubricated good enough so it requires the grease otherwise iron will be rubbing against iron and it will be problem depending on the kind of grease use then once there is heat if use the proper grease nothing will happen
@ he is using his dirty bare hands on the dirt ground to pack it up with grease. Introducing dirt and debris (hard contaminates) is how bearing failure occur.
As man who has trailer mechanic experience I’ve never seen a unit with leaf springs that big. My gosh I’ve changed some out but they’ve had three springs; this one is stacked 😅😮
Also, no tam-pawn. He's a man, not a twink or some broad. You 😺 boys that need to wear gloves, whenever you do something, are just the worst. Oh no! You got some brand new, clean, grease on your hands!
Sorry but I don't think these people care about that kinda stuff, furthermore, you can't really get bearing packers for such massive bearings. Even I just use my hands on my headset bearings for example.
@@howlingbeats2544 that's a normal truck bearing & of course they make packers that fit those bearings... all the packers I've ever used would work on that bearing.
I’ve been reading about self lubricating bearings and I understand the design but I can’t understand how the design provides enough lubricant over time to avoid heat and wear.
@@craigr6186 LOL. That little tap did absolutely nothing to that bearing. You're one of those guys that has to use a torque wrench to put lug nuts on, because you don't have the experience or ability to feel when it's tight enough.
@@kylebusc3624 Do you see the size of that thing, I bet it weighs 8 to 10 lbs. I've dropped skateboard bearings in grease on e on each side and it does the trick and they weigh grams not pounds.
@@FuctByTheGovernment I'm pretty sure the surface area would make it sit right on top of the grease instead of sinking in. Also, roller bearings are lighter than they look. 8-10 pounds is absolutely absurd it's probably closer to 2-3. Look at the ease in which the guy is handling it
@@kylebusc3624I have held bearings in my hand that's that size and what is absolutely absurd is thinking that they only weigh 2 to 3 lbs for bearing that size. The weight that the bearing is supporting is tens of tons I'm sure it weighs more 2 or 3 lbs.
@@FuctByTheGovernment they honestly don't though. I've worked in AutoZone and advance auto parts for 6 years. Go pick up a ten pound weight and you'll realize this bearing isn't 10 pounds. The box at the beginning isn't that much bigger than the dudes hand
I’d like to see a bit more between the rollers. The squeeze out on the other side should fill the gap between the cage and the race. You can over grease a bearing though, extra drag as the grease gets wrapped up around the bearing. The oil comes leaking out and you’re left with the thickener all nice and gooey on the inside.
i read about 2/3 full is optimal, since grease can hydrostatically push against the bearin when overfilled no clue how to achieve that with household tools though
Правильно сделано, на пицепе так делаю 3 года ходят колодки и подшипники живут хорошо. А дурачьё мажет сверху итог через примерно 20000км надо перемазывать. Если столкнётесь делайте также и неслушайте дурачков кто пихает в ступицу
Dont, this isn't how it's supposed to be done. Dont take my word for it, look up the Meritor instructional video. I'm sure whatever my man's doing here CAN work, it's still dumb. Also that wheel seal is probably gonna leak real quick, they need to be pounded into the back of the hub and then squeezed against the axle.
@@howlingbeats2544 it's probably known to the state of California to cause various problems... Damn near everything has that warning on it, at least here in the states.
You are allowed to HARD PACK a WHEEL BEARING on a NON-DRIVEN axle with grease. This isn't just a regular grease either. I use Grease with a NLGI rating of 00, which is semi fluid in my trailer wheel ends. It comes from the factory with this grease OR the grease he's using which is hard packed. He's doing it correctly. These greases also almost eliminate a wheel seal failure because the grease is thicker than an oil based lubricant. I know what you mean though... because before a few years back.. all I ever used was 80/90 or Hub Oil for lubrication.
I’m a Heavy duty diesel mechanic and i saw and found out greasing your wheel bearings will prevent the gear oil from cooling the bearing down therefore having the bearing to over heat and break apart. You should add gear oil to them, NOT grease.
Legend has it he’s still washing his hands to this day
How original
@@Unending.mp4 thanks. It took me about 2 years to come up with that
That shit is easy to get off you just need orange stuff hot water and a paper towel
gasoline has entered the chat
@@watermelonwatermelon6513 I just spray my hands down with brake clean after
Buckets full of grease are awesome
Grease enthusiast 😂
Damn that bearing is huge
I think it’s some truck hub bearing
@@vietnamesevince figured it hsf to be on a semi
That's what she said
@@Steelheart624 I think
@@nightcore-gautham2800 unrelated
I always love greasing up new bearings ❤️
@alex Maybe I'm weird, but I do love it :D
Needs more grease
Agreed.
True
No it literally doesn't, bearings should only be packed 1/3 full of grease. Surprised more people don't know this
Yes, this is a truck bearing, a tapered roller bearing. Small bearings are generally used in motors and pumps. The large ones are all in heavy machinery, and the large bearings that require strong gravity generally choose double-row angular contact ball bearings. Most of the small ones are spherical bearings. Because it requires high-intensity operation.
That is one absolute unit of a bearing. Goddamn. 😮 Das a big boi
More clean than others 😂
That's the cleanest your hands will get
What's the weight of that bearing
Bad idea, you dont want to introduce any hard contaminants on the bearing rollers also the installation was improper. I know it probably works most of the times but why introduce potential cause of failure.
nah mate wheel bearings need to be lubricated good enough so it requires the grease otherwise iron will be rubbing against iron and it will be problem depending on the kind of grease use then once there is heat if use the proper grease nothing will happen
How is grease a "hard" contaminate
@ he is using his dirty bare hands on the dirt ground to pack it up with grease. Introducing dirt and debris (hard contaminates) is how bearing failure occur.
As man who has trailer mechanic experience I’ve never seen a unit with leaf springs that big. My gosh I’ve changed some out but they’ve had three springs; this one is stacked 😅😮
Probably on a older flat bed trailer, looks pretty standard for tractor trailer units
In the United Arab Emirates, all cars have springs. The newest Volvos also have leaf springs. China is also on springs.
No glove?
Also, no tam-pawn. He's a man, not a twink or some broad. You 😺 boys that need to wear gloves, whenever you do something, are just the worst. Oh no! You got some brand new, clean, grease on your hands!
Wherever I packed a bearing it'd usually pull the gloves I had apart and I don't want that going into my bearings. Why I don't personally
That grease is probably like wet clay. Thick af. Enough so, I'd guess, to rip up the glove.
You don't need gloves.
Yup, I’m a certified grease fan
This guys hand are tiny that's insane 😮
Roti k saath khane ka mzaa 🤤😂😂😂
I always use a bearing packer. It's a lot cleaner
Sorry but I don't think these people care about that kinda stuff, furthermore, you can't really get bearing packers for such massive bearings. Even I just use my hands on my headset bearings for example.
@@howlingbeats2544 that's a normal truck bearing & of course they make packers that fit those bearings... all the packers I've ever used would work on that bearing.
Apparently gloves aren’t a thing. 🤔
Смазкой подшипник не испортишь.
В жд, ходят контролёры и следят за количеством смазки. В данном случае её слишком много, подшипник будет греться.
I’ve been reading about self lubricating bearings and I understand the design but I can’t understand how the design provides enough lubricant over time to avoid heat and wear.
Brass bearings in commercial washers and dryers are a great example.
You right the heat doesn’t expel. It over heats the bearings and bearing race therefore breaking apart inton tiny metal pieces
Fachowa robota, a nie wygląda:)
Blue Greece waterproof? 🤔🇬🇷🌊
I'm more impressed that he beat it on with a bolt
The way he hammered that on made me want to cry
Oh why is that? Maybe because the race is now dented and that truck will be back in a month with the bearing on fire?
@@craigr6186 indeed
@@craigr6186 LOL. That little tap did absolutely nothing to that bearing. You're one of those guys that has to use a torque wrench to put lug nuts on, because you don't have the experience or ability to feel when it's tight enough.
What about leaving the grease can open and expressed to dust? That made me cringe!
If the bearing couldn't handle that, you maybe shouldn't put it on a truck
É isso aí assim que se monta a lubrificante dentro dos roletes esta peça irá ter uma vida útil longa 👍👍👍👍👍
👍👍👍👍👍
Is there such a thing as overpacking a bearing?
Why no gloves? Is the grease good for hand skin??
After you've done this job forever you stop giving a shit abt clean hands lol
It’s pointless to try and keep your hands clean as a mechanic, but yes oil and grease does make your hands soft
@@dos1763 cancer, premature organ failure and arthritis though💀
@@spicyboioof130 your not gonna get organ failure from getting oil on your hands lol
@@dos1763 it's the lithium inside the grease... If it's just oil, why don't you fry beacon in it and have a meal
How much baring you want in your grease?
Vip grease for truck👌
Just drop it in the bucket the weight of the bearing will pack itself.
I wouldn't be so sure, wheel bearing grease is stupid thick. I wouldn't be surprised if it stayed on top. Plus roller bearings aren't that heavy
@@kylebusc3624 Do you see the size of that thing, I bet it weighs 8 to 10 lbs. I've dropped skateboard bearings in grease on e on each side and it does the trick and they weigh grams not pounds.
@@FuctByTheGovernment I'm pretty sure the surface area would make it sit right on top of the grease instead of sinking in. Also, roller bearings are lighter than they look. 8-10 pounds is absolutely absurd it's probably closer to 2-3. Look at the ease in which the guy is handling it
@@kylebusc3624I have held bearings in my hand that's that size and what is absolutely absurd is thinking that they only weigh 2 to 3 lbs for bearing that size. The weight that the bearing is supporting is tens of tons I'm sure it weighs more 2 or 3 lbs.
@@FuctByTheGovernment they honestly don't though. I've worked in AutoZone and advance auto parts for 6 years. Go pick up a ten pound weight and you'll realize this bearing isn't 10 pounds. The box at the beginning isn't that much bigger than the dudes hand
I could use a bucket of that grease for the weekends…
That's what she said
Grease name please
Grease grade-ep00?
Einfach mal das Lager mal in den Eimer gedrückt fertig 😊❤
Who would forget to wash their hands after that😅
Best way is to use the conical pump
Saves time and a lot of grease
Brake liner plus grease will be ur worst nightmare mate
Is there one that is like a big bearing but that you could wear
Grease konsa hai ye please reply
bro I think there's some balls in your greasing
BKT....that well known quality bearing manufacturing establishment......🤦♂️
Bearing name?
Tapper roller bearing
I’d like to see a bit more between the rollers. The squeeze out on the other side should fill the gap between the cage and the race. You can over grease a bearing though, extra drag as the grease gets wrapped up around the bearing. The oil comes leaking out and you’re left with the thickener all nice and gooey on the inside.
i read about 2/3 full is optimal, since grease can hydrostatically push against the bearin when overfilled
no clue how to achieve that with household tools though
Waiting for someone to say it’s not greased right
Чё то смазки маловато. Я бы ещё добавил. Через неделю заклинит.
Правильно сделано, на пицепе так делаю 3 года ходят колодки и подшипники живут хорошо. А дурачьё мажет сверху итог через примерно 20000км надо перемазывать. Если столкнётесь делайте также и неслушайте дурачков кто пихает в ступицу
Latex gloves are good for this
It’s not as fun with gloves lol
@@verounbhim3631 Heighten chances of cancer sure is fun init
Damn thats a weird car you got there man.
I never seen someone out the wheel seal and bearings on without pressing them all into the hub. I am not knocking it but i am going to try it
Dont, this isn't how it's supposed to be done. Dont take my word for it, look up the Meritor instructional video. I'm sure whatever my man's doing here CAN work, it's still dumb. Also that wheel seal is probably gonna leak real quick, they need to be pounded into the back of the hub and then squeezed against the axle.
He ate some food after that
Very therapeutic
Is that not carcinogenic?
not enough for me to care.
Why the hell would you think that bearing grease is carcinogenic? 😂
@@howlingbeats2544 it's probably known to the state of California to cause various problems...
Damn near everything has that warning on it, at least here in the states.
Lms system?¿ I really hope I'm mistaken bc you're not supposed to grease them
ur deffinetly suposto grease wheel bearings
Lol that is funny because it is inside a hub that uses 80 - 90 oil so no grease is supposed to be there ahaha don’t trust the internet people !!!
You are allowed to HARD PACK a WHEEL BEARING on a NON-DRIVEN axle with grease. This isn't just a regular grease either. I use Grease with a NLGI rating of 00, which is semi fluid in my trailer wheel ends. It comes from the factory with this grease OR the grease he's using which is hard packed. He's doing it correctly. These greases also almost eliminate a wheel seal failure because the grease is thicker than an oil based lubricant. I know what you mean though... because before a few years back.. all I ever used was 80/90 or Hub Oil for lubrication.
Good
I would just drop it in the bucket
cup it till it hurts
That's a huge roller bearing, I think it's for a truck
Did you not watch the hole video?
Must be a big skateboard
Nah they make tools for packing bearings under pressure, you don't need to be installing half-greased bearings like that
Good luck washing your hands
You never used hand degreaser before? It cleans this in seconds.
💯💯💯💐💐💐🇮🇳🇮🇳👍
أشعر طعمها لذيذ 😋
Nice 👍
gloves expensive or what
Filling the bearing inside the grease
you can never have too much grease
Filling the entire hub is too much.
@@thisisyourcaptainspeaking2259 ur wrong tho
@@kk-up5sk Military spec is wrong? Lol.
@@thisisyourcaptainspeaking2259 probably is cos its military spec anyway i was joking abt the grease calm down
Lol yes you can you idiot
32216 or 683
Wait, you install the hub last??
Double bearing aata h
Yes
Bro it's gonna take an hour to wash that grease off ur hands
Hello, I am a manufacturer of automotive wheel hub bearings
Ek bearing mein Girish banne ke liye itna time nahin lagta
where are the gloves??? lolz
You don't need gloves.
Fasza👍
Хоть на хлеб намажь😂
Not enough more please
give me more sand.
Sarung tangannya mana bang? Aduhh
You can wear a glove.
These dudes never wear gloves surely it can’t be good for you?
I don’t like gloves either but should have put some latex on
Taper roller
32220😮😮
Faça um curso de lubrificação.
Не знаете не учите делать как попало
I’m a Heavy duty diesel mechanic and i saw and found out greasing your wheel bearings will prevent the gear oil from cooling the bearing down therefore having the bearing to over heat and break apart. You should add gear oil to them, NOT grease.
Sounds about right honestly
What?? Never heard of that.
can here just for this comment
Blue greese
Omega 85
🙏
it's puts the lotion on the bearing
No.
Muito bom
We all learnt something. Not to waste time on stupid shorts
BPW.Axel.32222,32314
No gloves! Hmmm
Yea, press it in w a chisel, two spots. Good call
Норм ведро солидола
Fake skf😂😂
Oi
Didn’t spin the pins it’ll be dry in no time
Very inefficient way to pack a bearing. Get a grease gun with a needle point on the end and just squeeze the grease into it and roll it.
Needs more grease !!! 😒🤡🤡
أشعر طعمها لذيذ 😋
Hello, I am a manufacturer of automotive wheel hub bearings
Brilliant Will contact you.
@@GARAGESECTION Add your contact information