Click HERE for the OBDLink MX+ OBD2 Bluetooth Scanner for iPhone, Android, and Windows amzn.to/3eNa4cF Click HERE for the AlfaOBD APP amzn.to/3JHh495 Click HERE for the Security Bypass Module for 2018+ Vehicles amzn.to/3tbciwR
I used that ECRI module on my 2019 Chrysler 300 and it worked great. It costs about half what the others cost. If anyone is wondering about it, I didn't need to download the software for that ECRI device. I just plugged it in and used alfaobd like usual.
How can I make this work for a 2012 Ram? There is no LED search option for that model. I put led bulbs for my front and rear turn signals and reverse lights.
I have a 2018 ram 1500. Came with projector headlights originally. I bought and installed morimoto XBs a while back, they were flawless. Well within a year they got cloudy and morimoto changed them out. When I installed the replacement ones I got a left front turn signal out on the trucks display. Everything was installed just like the others and all lights are functional. Any ideas? Also the left side view mirror hyper flashes but not the front or rear left turn signals
Great video John thanks for all the tips. I miss the LED's you put on my vehicle. It was like night and day.. I thought I was just getting old but it made a world of difference. Thank you for doing that.
Hey John I got the HID kit and I have a 2015 ram 1500 with projector headlights. I got the kid you showed plugged it in to the low beam and it won't turn on sometimes it will flicker but never holds on. I got the resistors and they didn't change it. I finally just ordered this obd2 port and got the alpha app. Do you think this will make it turn on, someone please help it's been very stressful trying to figure out. Also the hid will work in my high beam just not the low beam projector. Can I use both at the same time also ?
@@BoostedMotorsports I went in and changed the settings with the alpha obd it works amazingly! I have the hid in the low beam and the Led from your other video in the high beam. Thanks again John already interested in the throttle lag upgraded !
@Miguel Prz I got the 55w kit from johns vid. They didn't work at all until I got the alpha obd and chip and went in the settings turned the high intensity on and turned the high and low beam led on
@CxtyMxrgue it turned out I had a bad resistor on the passenger side front parking/turn signal from the previous led lights setup I had after replacing the resistor the warning cleared
So I have a 2018 Ram 1500 and I just did this process and for some reason I am still getting the message on the instrument cluster when the headlights are on and I turn the signal on “parking light out” even though they are all set to LEDs. I did this at like 11am and let it sit until about 3pm and it’s still showing that message. Sooo is there something else I need to change to get that message to turn off? Do I have to let it sit overnight?
Is that where baby hellcats come from?!?!?!? I was just wandering if it would mess anything up. Does it change shift points? Fuel ratio? I tried it after i posted this question. So far i cant really tell if anythin changed as far as regular driving but it seems like my shift points might be a little higher when im hammering on it. I was tryin to find a way to shut off my tsc bullsnot. Any ideas
Hey John, I’ve been following your videos since you had the gray ram you supercharged and did all kinds of stuff to! They have been real handy with working on my own 2014 ram sport from changing headlight bulbs to changing the 8-speed transmission fluid! Thanks for all of the help! My truck also has the factory projector headlights that has the LED turn signal lights and 2 LEDS have burned out making the computer give me the ‘turn signal light out’ msg on my dash. Sometimes it gives and error and I’ll go months with it on, then one day it’ll be gone for months and working properly. When the error is on, the inside signal and the light on the tow mirror hyper flash, but the front and rear signal flashes like normal. Do you think or know if this plug in programmer could possibly help it since it’s factory LEDS? The dealership only wants to sell me a whole new headlight fixture.
I have the same problem unfortunately my rear OEM led tail light is burnt out and only fix is to replace it. You could always get the switchback LED for your headlights and put them in
@@BoostedMotorsports that’s what I was afraid of. It generally works fine until I drive in the rain or it gets moisture in it some other way, but sometimes it just has a mind of its own!
@@BoostedMotorsports thanks for ignoring my question on both your videos on this subject. Might wanna do some research before posting and giving people false information.
I have a 2015 dodge Ram sport and upgraded to morimoto xb2’s and now my low beams randomly turn off during a short drive at night. My high beams always work though? Would this video apply to fix my issue
Awesome video!! Been watching your channel before I decided to get my Dodge Ram. I ended up going with a 2010 Dodge Ram 5.7 hemi. I plan on doing some mods like the ones on your videos. My main question is: For my 2010 is alfaobd needed for changing interior and exterior lights to LED?
I just tried this and then removed my wiring harness that I bought from morimoto and now it show beams out when they are on. Also had to hook back up the harness because the lights wouldn’t turn on without the harness
i have a 15 dodge dart and i get none of those options and the one option i get is headlamp led managment and when i set that it set off my tracking control and air bag light. how do i get this to work
a Tazer only does a fraction of what alfaobd can do. alfaobd pretty much gives you dealer level access to all the modules in the car, a Tazer is very limited in what it can change and mainly only interacts with the Body Control Module.
Click HERE for the OBDLink MX+ OBD2 Bluetooth Scanner for iPhone, Android, and Windows
amzn.to/3eNa4cF
Click HERE for the AlfaOBD APP
amzn.to/3JHh495
Click HERE for the Security Bypass Module for 2018+ Vehicles
amzn.to/3tbciwR
Best error removal videos on yt
I have to agree. He showed ever step
My MX+ will be here Saturday. Can't wait to get started. Thanks for the tips and keep them coming.
No problem Phillip let me know how you like it! 💪
@@BoostedMotorsports Will do
I used that ECRI module on my 2019 Chrysler 300 and it worked great. It costs about half what the others cost. If anyone is wondering about it, I didn't need to download the software for that ECRI device. I just plugged it in and used alfaobd like usual.
Awesome! Glad it worked for you as well 💪
Good things to know! Thanks for the heads up man!
You bet!
Will the AlfaOBD work on a 2011 ram sport to allow led turn signals
Hey, thanks for the video, quick question I have. What would be the best cheapest way to do tire size calibration/programming on new ram
Is there a Playlist for the current 1500?
How can I make this work for a 2012 Ram? There is no LED search option for that model. I put led bulbs for my front and rear turn signals and reverse lights.
Do you know if I changed my headlights to the ram projectors i can turn on the feature you showed and remove the dual resistor kit?
Yes sir! 💪
For hids do you need to turn hid and led low beam on
I have a 2018 ram 1500. Came with projector headlights originally. I bought and installed morimoto XBs a while back, they were flawless. Well within a year they got cloudy and morimoto changed them out. When I installed the replacement ones I got a left front turn signal out on the trucks display. Everything was installed just like the others and all lights are functional. Any ideas? Also the left side view mirror hyper flashes but not the front or rear left turn signals
Great video John thanks for all the tips. I miss the LED's you put on my vehicle. It was like night and day.. I thought I was just getting old but it made a world of difference. Thank you for doing that.
Glad to help
Hey John I got the HID kit and I have a 2015 ram 1500 with projector headlights. I got the kid you showed plugged it in to the low beam and it won't turn on sometimes it will flicker but never holds on. I got the resistors and they didn't change it. I finally just ordered this obd2 port and got the alpha app. Do you think this will make it turn on, someone please help it's been very stressful trying to figure out. Also the hid will work in my high beam just not the low beam projector. Can I use both at the same time also ?
Yes turn on the HID and LED low beam setting and remove the resistors
@@BoostedMotorsports thanks John will update ya tomorrow 👍🏻
@@BoostedMotorsports I went in and changed the settings with the alpha obd it works amazingly! I have the hid in the low beam and the Led from your other video in the high beam. Thanks again John already interested in the throttle lag upgraded !
@Miguel Prz I got the 55w kit from johns vid. They didn't work at all until I got the alpha obd and chip and went in the settings turned the high intensity on and turned the high and low beam led on
Now they work great
Does this work on the finicky 2015 ram 1500? Or would I still need the extra harness and resistors?
This is an old video. We have our own kit we sell now that has everything built in on www.ShopBoosted.com
Anyone have the parking light out message after upgrading to Alpharex G2 pro headlights? If so did you get it to delete stored message ?
Yes, I did have it coming up time to time, found out if you unplug the tiny wire that goes to battery terminal it will clear the message in the dash
@@MrPaveles do you mean the red or black wire that's hookup to the battery for the alpharex pro series g2 drl driver ?
Any solution? Have the same headlights
@CxtyMxrgue it turned out I had a bad resistor on the passenger side front parking/turn signal from the previous led lights setup I had after replacing the resistor the warning cleared
@@joe7528 Do you have a link to the resistors you used? Or the name/brand
can you do all this with the demo version of alfaobd?
Can do that whit blue driver pro obd scaner to ?
Can it change the tire size so speedometer will work correctly
Yes. "Program tire size". I have 35/12.5/20s. So you have to find the circumference in mm. Mine is about 2791mm
So I have a 2018 Ram 1500 and I just did this process and for some reason I am still getting the message on the instrument cluster when the headlights are on and I turn the signal on “parking light out” even though they are all set to LEDs. I did this at like 11am and let it sit until about 3pm and it’s still showing that message. Sooo is there something else I need to change to get that message to turn off? Do I have to let it sit overnight?
Having the same issue
Did u figure it out?
Hey i have a 14 ram craftsman. What happens if i tell the cumputer its an SRT
A 6.2 falls out of the sky and automatically gets installed
Is that where baby hellcats come from?!?!?!? I was just wandering if it would mess anything up. Does it change shift points? Fuel ratio? I tried it after i posted this question. So far i cant really tell if anythin changed as far as regular driving but it seems like my shift points might be a little higher when im hammering on it. I was tryin to find a way to shut off my tsc bullsnot. Any ideas
Leave the OBD plugged in afterwards or unplug?
Thoughts?
I left mine plugged in so I can see the read outs as I drive. But you can take it out and it will be fine
I don't have error but im trying to run hid fogs and if the truck is not running they work any info??
If you have a good scanner like example Autel you can just clear it ,I did never comes back
Hey John, I’ve been following your videos since you had the gray ram you supercharged and did all kinds of stuff to! They have been real handy with working on my own 2014 ram sport from changing headlight bulbs to changing the 8-speed transmission fluid! Thanks for all of the help! My truck also has the factory projector headlights that has the LED turn signal lights and 2 LEDS have burned out making the computer give me the ‘turn signal light out’ msg on my dash. Sometimes it gives and error and I’ll go months with it on, then one day it’ll be gone for months and working properly. When the error is on, the inside signal and the light on the tow mirror hyper flash, but the front and rear signal flashes like normal. Do you think or know if this plug in programmer could possibly help it since it’s factory LEDS? The dealership only wants to sell me a whole new headlight fixture.
I have the same problem unfortunately my rear OEM led tail light is burnt out and only fix is to replace it. You could always get the switchback LED for your headlights and put them in
@@BoostedMotorsports that’s what I was afraid of. It generally works fine until I drive in the rain or it gets moisture in it some other way, but sometimes it just has a mind of its own!
@@BoostedMotorsports thanks for ignoring my question on both your videos on this subject. Might wanna do some research before posting and giving people false information.
I have a 2015 dodge Ram sport and upgraded to morimoto xb2’s and now my low beams randomly turn off during a short drive at night. My high beams always work though? Would this video apply to fix my issue
I just ran into same issue what was your fix?
Any update on this? Mine are not working.
What kind of tablet are you using? I see the app is only compatible with android?
i have a obd FIXD does it work too?
Anyone knows if the elm 327 obd 2 v2.1 can do this too?
Awesome video!! Been watching your channel before I decided to get my Dodge Ram. I ended up going with a 2010 Dodge Ram 5.7 hemi.
I plan on doing some mods like the ones on your videos. My main question is:
For my 2010 is alfaobd needed for changing interior and exterior lights to LED?
Does this work on a 2005 Ram 1500?
I just tried this and then removed my wiring harness that I bought from morimoto and now it show beams out when they are on. Also had to hook back up the harness because the lights wouldn’t turn on without the harness
Do you think this program you use can also turn off the mds ?
MDS has to be done with tuning software such as HPtuners or DiabloSport.
i have a 15 dodge dart and i get none of those options and the one option i get is headlamp led managment and when i set that it set off my tracking control and air bag light. how do i get this to work
I have done everything from the video and I still get Parking Light out error! WTF???
I am having this too, any fix?
👍👍👍💯🙌🙌🇺🇸🇺🇸
💪
Anybody else having Bluetooth connectivity issues with the Alfaobd app?
I had the same issue a week ago so i decided to go back to my app store and looked up AlphaOBD and it needed a update
You don't need a MX+ ($139)
why not just get a tazer
a Tazer only does a fraction of what alfaobd can do. alfaobd pretty much gives you dealer level access to all the modules in the car, a Tazer is very limited in what it can change and mainly only interacts with the Body Control Module.
I don't get light out error but my led headlights randomly turn off.
Always come back with a restart of key.