Man this video saved my life. I had started shaving my head but decided to unmount the trimmer because it had a lot of hair stuck inside from several ages. I could not mount it back but this video showed it how those two wires are supposed to work with the lower blade and such. Took me less than a min to mount it back. Thanks a ton.
I hope you see this!!’ I followed what you did in the video, I’m on the part where you push and hold the cutting blade down but when I push the top blade down there is a space where it’s not against each other. My foam piece came out but I put it back in. Idk if that has something to do with it or not. If u have any suggestions on help please let me know I’ve been trying to fix it for about an hour now and can’t get it.
@@quintonpreston3749 ofcourse i read every comment, honestly the foam its nothing really big to be concerned about its just to protect the motor from oil and hair , but just make sure you clean it after every use and dont put too much oil just a 3 drops on the left right and middle
@@kishancod6 ofcourse 💯… actually yea the prongs arent pressed in all the way, make sure there in snug… im 99.9 percent sure its that, and make sure the screws are tightened enough to where u dont strip or damage it
Manual says don't touch the blades - don't see how its possible to keep it working/maintained without doing the operation as per this video. Good stuff.
Well thank you, all the clippers we buy i clean every couple a months replace with a new blade last for a very long time till the battery gives out works just as new save a ton of money till you get a new set.
Just bought a pair of Babyliss Pro. How often does this process need to happen? Manual says after every use, but this seems extreme. What needs to be done after every use, and what needs to be done less regularly for maintenance? Thanks.
What happens if you take the safety cushion out? Cause I cleaned out mine but every time I try to turn it on, it will stay on for a few seconds and the clippers would stop working. I’m thinking my clippers stop working because of the safety cushion ?
So I accidentally ripped a bit of the top Styrofoam off the top of the inside of my clippers ... didn't know it was there thought it was all hair..... should I replace it? Can I replace it? Or would it be ok to leave be? Thanks!
Hi laura ,🤔As long as you keep it clean should be fine, yea its a tricky part if you arent careful but if you want to replace it heres a link its about 2 bucks proproductsandmore.com/index.php?main_page=product_info&products_id=4036
this is such a bad design, it should be designed to be cleaned easily without taking it apart. they fixed the issue in the fx one, but this one is flawed for sure.
Man this video saved my life. I had started shaving my head but decided to unmount the trimmer because it had a lot of hair stuck inside from several ages. I could not mount it back but this video showed it how those two wires are supposed to work with the lower blade and such. Took me less than a min to mount it back. Thanks a ton.
Hell yea brotha im glad 💯
Thanks man, halfway through the trim mine broke. Didn't have any clue to repair it, your video saved it for me. ❤
I hope you see this!!’
I followed what you did in the video, I’m on the part where you push and hold the cutting blade down but when I push the top blade down there is a space where it’s not against each other. My foam piece came out but I put it back in. Idk if that has something to do with it or not. If u have any suggestions on help please let me know I’ve been trying to fix it for about an hour now and can’t get it.
@@quintonpreston3749 ofcourse i read every comment, honestly the foam its nothing really big to be concerned about its just to protect the motor from oil and hair , but just make sure you clean it after every use and dont put too much oil just a 3 drops on the left right and middle
thank you for your help i was having problem with babyliss try to clean it i forget how to put it back too
Ofcourse
what if the foam piece on the inside comes off n the little tape ? Where can you get that
Hey, thanks for the vid! For some reason my Babyliss is very loud after putting it all back. Do you maybe know why? Its very loud haha
@@kishancod6 ofcourse 💯… actually yea the prongs arent pressed in all the way, make sure there in snug… im 99.9 percent sure its that, and make sure the screws are tightened enough to where u dont strip or damage it
Worked great for me THANK YOU!
My saftey cushion broke in half during cleaning. Is there something i can use as a replacement or buy replacement?
proproductsandmore.com/index.php?main_page=product_info&products_id=4036
You can try to clean it… should be good … but i sent a link for it works just aswell
Manual says don't touch the blades - don't see how its possible to keep it working/maintained without doing the operation as per this video. Good stuff.
Well thank you, all the clippers we buy i clean every couple a months replace with a new blade last for a very long time till the battery gives out works just as new save a ton of money till you get a new set.
Just bought a pair of Babyliss Pro. How often does this process need to happen? Manual says after every use, but this seems extreme. What needs to be done after every use, and what needs to be done less regularly for maintenance? Thanks.
I do it every 2-3 months.. oil hair gets stuck in there.. how do you like them?
@@8THRU5Official Thanks! Love them so far. A barber in the UAE I visited used them and I had to get a pair. My Wahl's had seen the end of the road :)
@@garthball awesome brotha.. wait till you use the baby lyss boosts.. if i ever get to 1k subs ima give out a pair ill put you in the raffle
UAE?
What happens if you take the safety cushion out? Cause I cleaned out mine but every time I try to turn it on, it will stay on for a few seconds and the clippers would stop working. I’m thinking my clippers stop working because of the safety cushion ?
Nothing really but in time the oil and hair will damage the motor… but as long as you clean it should be fine
So I accidentally ripped a bit of the top Styrofoam off the top of the inside of my clippers ... didn't know it was there thought it was all hair..... should I replace it? Can I replace it? Or would it be ok to leave be?
Thanks!
Hi laura ,🤔As long as you keep it clean should be fine, yea its a tricky part if you arent careful but if you want to replace it heres a link its about 2 bucks
proproductsandmore.com/index.php?main_page=product_info&products_id=4036
@@8THRU5Official thank you so much!! this was VERY helpful :)
I did the same thing, so this was a great question and a very helpful response, thank you guys
@@jazzflorez3037 Ofcourse your welcome 🤗
hey man i can’t get it adjusted right i can’t make the blades how it used to be
It can be something minor make sure the prongs are in the holes and pressed in try that.. take it all apart and try it again
Thanks!
hey , if I wanted it sped up I’d speed it up myself, Its so blurry and no clear frames
Refering too?
What happened if you do take that piece out of the with hair?
Please elaborate
@@airabellaiseeu- what’s wrong with it ? Blades chipped batteries?
THE STYROFOAM PEICE IS MISSING
@@airabellaiseeu- proproductsandmore.com/index.php?main_page=product_info&products_id=4036
@@airabellaiseeu- sent u the link also it’s nothing really to be concerned about .. just clean it really good after some haircuts
1:25 😂😂😂😂😂😂😂😂😂😂😂😂😂 amen brother
🙏🏽
Uh uh uhhhhh uh uh uhh uh uh 🤦🏽
this is such a bad design, it should be designed to be cleaned easily without taking it apart. they fixed the issue in the fx one, but this one is flawed for sure.
@@ionut5316 alot of these clippers are were new to being wirelsss, as of now they are perfecting them…