GU Barra conversion EP6: IT STARTS! Loom, clutch and first start!
HTML-код
- Опубликовано: 12 сен 2024
- In this episode I'll be installing the mighty Mantic twin plate clutch, the wiring loom and putting the motor in ready for the first start. Then I turn the key and hear it run for the first time! This was a special moment for sure.
Next episode: Exhaust, power steering ECU bracket and other fab work.
Thank you for patiently waiting for this episode will have the next one out sooner!
Feel free to like, share and subscribe :)
PARTS:
BA XR6 turbo motor (wrecker)
FG exhust manifold, sump and pickup (wrecker)
Bellhousing & mounts (castlemain rod shop) - www.rodshop.co...
Mantic twin plate clutch & flywheel (castlemain rod shop) - ^^^
HP Tuners - vcmstore.com.a....
Bulkheads - www.ebay.com.au
Alternator and throttle pedal brackets: www.offroad243...
Fuel pump: www.tunersedge...
Tacho and Speedometer adapters - MDauto
Is there an ending to this story like is it finished?!
Don’t ever delete these videos! They’re gonna help me so so much in about 2 years
2 years is up, how are you going?
cant wait to see her rolling under some barra steam, such a cool and authentic build to watch
Will Marks Me too mate! Soon! Appreciate it mate!
Awsome mate, I'm looking at starting this project real soon. So keen
jaydenxguitar Yeah sweet! Just dive in mate, only way to do it!
Hey mate when is there gonna be a new video love your work
Loving the conversion, keen to do one soon! Pump out those Eps, great job.
Glad to see this video come out. Very keen to do the same one day. Keep it up.
TheCraney15 Thanks mate, yeah do it!
Congrates Mate, love see it come together, making be think it time to give the TB42 the flick
shawn hindmarsh, thanks bro! Maybe turbo the TB? Haha
Nice build mate jus wondering how much did it cost excluding the motor?
Barra conversion in the LandCruiser not having any luck with wiring diagram shown
Ahh, Land Cruiser will be completely different. There’s a Barra Land Cruiser face book page. They will be able to help 🙂
@@BenKeeneOfficial thank you very much for that information
Any more vids coming?
Hey great & imformative vids. im in the middle of doing my barra conv, can you tell me what you done with the heater pipes coming out of the firewall. My inlet manifold are hitting it???
Nice!!! Can't to reach the same stage as you haha. Top work bro. Keen to know how the rodshop mounts perform!
Salim Dakkak haha thanks mate! Yeah me too, they are definitely solid mounts 😂
@@BenKeeneOfficial Also the radiator fan shroud that you got, would it fit on a TB45 radiator? Where did you get it from?
Salim Dakkak its for a TB45 radiator mate but I don’t know if it will fit a standard one. Bought them as a package.
@@BenKeeneOfficial Ah okay where did you buy it from mate?
Salim Dakkak just on Ebay honestly its a worley 3 row rad
Can you put something behind the block to stop it swinging around when you maneuver stuff on? Just a suggestion.
ali xena I tried but its ended up moving more. Did what I could haha. Thanx Mum ;)
Hey mate awesome work and good description!! Is there any easy way with the wiring only part I’m stuck on at the moment
Awesome work mate. I hope I’m wrong but that motor doesn’t sound healthy, seemed to have low compression when you turned it over
Thanks Mate, i thought the same. it had been sitting for a couple years only being turned over ever 6 months. after it was running for abit longer it stopped doing it. I assume there may have been some corrosion on the valves. Thanks for the concern though Bro!
Ben Keene that would explain it! I’ve just finished building a gu but I’ve used a Zf trans. Couldn’t be happier
Sammie n Dave Caisley Hell yeah! I made sure I put a ZF loom in mine so who knows what the future holds haha
Sick vid mate, would it be a similar process using a ba look, iam planning to barra my gq patrol, cheers cob
The Bfg yeah mate would be pretty much the same! Easy bro!
Hey man, great video.
I’m doing a barra swap into a 49 ford.
Iv ripped out most of the wiring out of the donor Falcon. Would you know if I could run it on a stock ecu, wiring, fuse boxes etc ? Or would you know how I can find more info on like a re wire kinda buzz ? Thanks mate
What a weapon I’ve been looking at doing this for a long time how much was it all?
Ricardo Mythorian crusader Hey Mate, cheers! Not 100% sure on total cost yet but should be around the 8k mark
Hey mate, any updates of the troll?
did u get a plug and play harness or do all the wiring urself if. if you bought a harness, how much u pay?
hey mate, had a loom made would cost about $600 for a basic stand alone loom.
@@BenKeeneOfficial I've got the factory one that came with my fg should I just modify that or get one made?
Sam Foster the engine loom doesn’t have to be modified. All you will need is the the body loom and 30cm of wire. And get the loom made off that. If you can afford a plug and play do that is not get the standard one modified
Did you get the AC to work
Yeah mate getting lines made up
Any updates with this bro
Will be making an update soon mate!
I have a question , why did u go rod shop not dellows ?
Matty Moto, Hey mate at the time I hadn’t heard many good things about the dellow kit at the time and rod shop had a complete kit so It was easy as. Have had no issues at all with the kit and definitely recommend it. Only thing id say about the rod shop kit is the engine mounts should have bigger plates to weld to chassis with plug holes.
Ben Keene okay thanks I’m not in a rush to do a Barra swap I will in a couple of years I just wanted to know the pros and cons thanks so much
Matty Moto Thats alright no worries mate. Hope to see another barratroll out there soon!