Im a beginner barber and i just upgraded from my corded seniors to the boosted, thanks for your opinion on them helped me to learn more I could always count on you with honesty about barbering👍
When I take out the clicker and have the stretch bracket installed, I find that with pressure, the blade will start closing… like from fully open to where the 5th notch is
Do you have a video where you go in-depth on how you connect the length you cut with the stretch bracket to the length you cut with the regular taper blade?
im glad that i looked at this video before i emailed you about the stretch bracket. I was thinking that with the addition of the bracket, you are able to get a smoother transition from your no guard closed to open.. only thing is that my clippers are set so well and crunch so well that im afraid to take them apart and have to adjust as i go forward with more cuts. I dont think they will ever be the same if I alter them now. My 5 stars and designers went trough this.. my designers were the ones but when i adjusted them they were never the same.. got them decent but never the same. My 5 stars on the other hand were less desireble for me especially not being the best with the fade blade right away. i changed to a faper blade and they got louder but not better.. i know its a customize at your own risk type of thing, but is it really worth it when you have some hitters but dont really want to lose the ability for the equipment to remain with a premium vibe... i will also say that i dont really like how im not able visually see the difference from my first guideline put in with a trimmer, to the no guard open. My no guard open is still so low that it hard to distinguish the lower guideline under it.. thanks for the information and all the good content.
I stopped using my Gamma fade blade or the taper blade... it gets unbearably hot. I just put a Wahl blade on it with a ceramic cutting blade, the boosted gets really loud with a regular steel Wahl cutting blade. I love the Boosted, great clipper but I absolutely hate how the blade wiggles on the bracket... I heard applying threadlocker on the lever screw will fix that, but that is a poor manufacturing defect. My next clipper will the the trusted Magic Clip or I'll just go back to the Seniors.
Just a quick update: my colleague "dropped" my Boosted and the clocks somehow "fell out" 😒.. but now I find the bracket doesn't wiggle and the blade is secure. I have now reverted back to the original Gamma Boosted cutting blade with the faper blade and man! This machine is awesome. I find the blade still does warm up slightly, but the secure blade without the clicks combined with the faper blade is a winner! I pretty much have a Magic Clip blade setup on my Wahl corded Icons, but the Boosted is now my go-to. Great clipper! 🎉
Can you make a video where you switch the clipper on after you change blade as they don't work the same and get loose overtime and Camshaft starts to make loud noise. If you show how fix and eliminate the sound that comes from VibRATION think this it will be the holy grail to not replacing clippers IMO
I wouldn’t say it gets loose but yes they get loud. Nothing to do with the blade swap though. They come with an extra cam follower so you can swap it when it gets loud
Right after I watched this I bought them, and the MB grape guards. I've never done more than clean up my neckline, behind my ears, and my sideburns, I don't know much about clippers so seeing that this looks sleek and has a click lever made me instantly want to buy it and try to fade my own hair. also, I know many people prefer the faper blade. is the stock fade blade difficult to use or whats the difference, Any tips ??
I just got mine in the mail, I also purchased the faper blade. I put the stretch bracket on as well but for some reason when I go to put the blade on and tighten the screws all the way the right side doesn't move but the left side does as if I have the screw loose but I do not. Any suggestions, or reasons this may cause?
Hey Sean, i heard stylecraft made some changes to their new batch for the rebels a few months ago compared to when they released, what do u know about this? And whats the difference?
@@Seancutshair thank you for the reply bro, like you I prefer a taper blade, do you think there would be a benefit to removing the clicker since I'm using a taper blade?
I have a question if you can answer it? I tied to put the bracket on and the lever screw just keeps turning, screw won’t come off, is this a defect or do you happen to have a solution for this, any help is greatly appreciated
Yeah it’s different from this video you have a pink piece inside and mine is white smh knew something was wrong, I appreciate you responding and keep up the great work and content, your a blessing brother!!
So I found the solution! The blade is wobbling due to the guard lever not being screwed tight enough, I know in the video Sean mentions to not screw it too tight as it will be difficult to push it up or down, which is true but the solution is that you used the RED lever as it has a slightly different shape to the black lever it allows it to tighten further without it rubbing against the side of the clipper body. Long story short follow everything in the video above, but USE THE RED LEVER INSTEAD OF THE BLACK (it will not have a the spring or the little stop for the click like the black one or gold one does to begin with) and make sure it’s as tight as possible whilst still being able to manoeuvre between guard open/closed. Thank you for the video bro @seancutschair
Sean question, i have the wahl seniors cordless . literally the exact same way u showed us how to install the SC faper blade on the boosted. Would that way work on the wahl seniors? is it possible to get the SC faper blade on it?
I have the gamma boosted, I’m new(cutting my own hair) but I’m having trouble with fading/blending in (I always see the lines and can’t blend it. Do you recommend taper or fusion blade? I mainly try to do blowout mid tapers. But yeah I would like to know what you think! Thanks in advance!
Not sure if you will reply to this and I apologize in advance for bothering you with this. First off appreciate you and I watched many of your unboxing and clipper trimmer reviews. After weeks I narrowed down I want a gamma boosted and style craft sabre. I live in Canada and am skeptical of every option I have come across for online options. Have you heard of barbersupplies canada and are they legit? Gamma won’t directly ship to Canada and neither will your suggested supplier. Thanks mate
@Seancutshair i have a problem with original bracker on my alpha. It looks like it is crooked a little. When you switch from lever completly closed to one point higher, only one side of a bracket moves. It is the side on the side of lever. When i was trying to squeeze it a little to fit bracket slider properly, it starts to move very resistive. I was also trying oiling it to perform a better slide. Is there any proper way to fix it? Any other brand does not have this problem. :(
So I found the solution! The blade is wobbling due to the guard lever not being screwed tight enough, I know in the video Sean mentions to not screw it too tight as it will be difficult to push it up or down, which is true but the solution is that you used the RED lever as it has a slightly different shape to the black lever it allows it to tighten further without it rubbing against the side of the clipper body. Long story short follow everything in the video above, but USE THE RED LEVER INSTEAD OF THE BLACK (it will not have a the spring or the little stop for the click like the black one or gold one does to begin with) and make sure it’s as tight as possible whilst still being able to manoeuvre between guard open/closed. Thank you for the video bro @seancutschair
So I found the solution! The blade is wobbling due to the guard lever not being screwed tight enough, I know in the video Sean mentions to not screw it too tight as it will be difficult to push it up or down, which is true but the solution is that you used the RED lever as it has a slightly different shape to the black lever it allows it to tighten further without it rubbing against the side of the clipper body. Long story short follow everything in the video above, but USE THE RED LEVER INSTEAD OF THE BLACK (it will not have a the spring or the little stop for the click like the black one or gold one does to begin with) and make sure it’s as tight as possible whilst still being able to manoeuvre between guard open/closed. Thank you for the video bro @seancutschair
I purchased my StyleCraft rebel and changed the stetch bracket . I have noticed the bracket is not very tight and because of that it caused problem that the blade may change position? Its a bit wobbly? Its easy to check you can try to turn it to left and right. I don't know if this is normall for clipers ? Is anyone know? Thanks
So I found the solution! The blade is wobbling due to the guard lever not being screwed tight enough, I know in the video Sean mentions to not screw it too tight as it will be difficult to push it up or down, which is true but the solution is that you used the RED lever as it has a slightly different shape to the black lever it allows it to tighten further without it rubbing against the side of the clipper body. Long story short follow everything in the video above, but USE THE RED LEVER INSTEAD OF THE BLACK (it will not have a the spring or the little stop for the click like the black one or gold one does to begin with) and make sure it’s as tight as possible whilst still being able to manoeuvre between guard open/closed. Thank you for the video bro @seancutschair
@@Alizendehdel996bro i have the Same Problem now with my new bought Gamma boosted, but its still loose. With red lever or black its the same and with the normal bracket too
@@elGzuuu it should work cos gamma case is not very different than magic clip, i will order one bracket but i have to wait cos i cant get it in romania first
I had this issue on my rebel and then on a second rebel. Wanted to learn how to incorporate the stretch bracket but had to take it out cause it moved 👎🏾
iv noticed it does cut really harsh especially the shorter the number, 😢bare blade etc - even more so than the wahl senior fade blade - i may invest in the fusion blade and give that a try. do i have to change the cutting blade too?
Hi mate. What the difference between the deep tooth cutting blade and the shallow tooth cutting blade. And will I need to change the cutting blade if I put the faper blade on the boosted thanks man
![Stromae, Pomme - “Ma Meilleure Ennemie” (from Arcane Season 2) [Official Visualizer]](http://i.ytimg.com/vi/1F3OGIFnW1k/mqdefault.jpg)
Im a beginner barber and i just upgraded from my corded seniors to the boosted, thanks for your opinion on them helped me to learn more I could always count on you with honesty about barbering👍
Awesome! You’re welcome 🙏🏼
When I take out the clicker and have the stretch bracket installed, I find that with pressure, the blade will start closing… like from fully open to where the 5th notch is
Have to tighten the lever enough so that doesn’t happen
Do you have a video where you go in-depth on how you connect the length you cut with the stretch bracket to the length you cut with the regular taper blade?
Every tutorial that’s how I do it so just pick one 👌🏻
im glad that i looked at this video before i emailed you about the stretch bracket. I was thinking that with the addition of the bracket, you are able to get a smoother transition from your no guard closed to open.. only thing is that my clippers are set so well and crunch so well that im afraid to take them apart and have to adjust as i go forward with more cuts. I dont think they will ever be the same if I alter them now. My 5 stars and designers went trough this.. my designers were the ones but when i adjusted them they were never the same.. got them decent but never the same. My 5 stars on the other hand were less desireble for me especially not being the best with the fade blade right away. i changed to a faper blade and they got louder but not better.. i know its a customize at your own risk type of thing, but is it really worth it when you have some hitters but dont really want to lose the ability for the equipment to remain with a premium vibe... i will also say that i dont really like how im not able visually see the difference from my first guideline put in with a trimmer, to the no guard open. My no guard open is still so low that it hard to distinguish the lower guideline under it.. thanks for the information and all the good content.
👌🏻👌🏻👌🏻
Influence them to make a metallic green and black pair!
Yeah I’ll try lol
just spray the cover yourself 😅
Yea I hate the new colors only black, pink or white. Maybe I'll have someone airbrush the white one
This channel is underrated
🙏🏼🙏🏼🙏🏼
Thank you for your time and info...I ordered the boosted, instinct clippers and trimmer with the foil shaver . Used your code
Nice 👌🏻 will be a solid setup
Just got this entire setup from FW and used your code for the discount ✅
Can't wait to use and try it out!! Thank you Sean 🙏
Hope you enjoy it!
I stopped using my Gamma fade blade or the taper blade... it gets unbearably hot. I just put a Wahl blade on it with a ceramic cutting blade, the boosted gets really loud with a regular steel Wahl cutting blade.
I love the Boosted, great clipper but I absolutely hate how the blade wiggles on the bracket... I heard applying threadlocker on the lever screw will fix that, but that is a poor manufacturing defect. My next clipper will the the trusted Magic Clip or I'll just go back to the Seniors.
I haven’t had any issues with mine I’m on my second set. Don’t know what’s causing all that
have sort of the same issue. they’re a little on the warm side after short use
Nothing beats wahl blades
Just a quick update: my colleague "dropped" my Boosted and the clocks somehow "fell out" 😒.. but now I find the bracket doesn't wiggle and the blade is secure. I have now reverted back to the original Gamma Boosted cutting blade with the faper blade and man! This machine is awesome. I find the blade still does warm up slightly, but the secure blade without the clicks combined with the faper blade is a winner! I pretty much have a Magic Clip blade setup on my Wahl corded Icons, but the Boosted is now my go-to. Great clipper! 🎉
What ist better , fade Blade or Fusion Blade ? And can i put the Fusion Blade on the babyliss machine ?
I like the fusion and yes Babyliss makes a mim blade now that is that style
@@Seancutshair so in your opinion the Fusion Blade is better ? And wich Clipper ? Fx boost or Rebel?
And another one!!💪🏻 you are the man keep doing what you do!!
Always!
Can you make a video where you switch the clipper on after you change blade as they don't work the same and get loose overtime and Camshaft starts to make loud noise. If you show how fix and eliminate the sound that comes from VibRATION think this it will be the holy grail to not replacing clippers IMO
I wouldn’t say it gets loose but yes they get loud. Nothing to do with the blade swap though. They come with an extra cam follower so you can swap it when it gets loud
Sean from all my research I’ve decided that I want this clipper set up. Bruh sold out everywhere. Damn it 😂😂😂
Fwbarbersupply.com has them. If they don’t on the site shoot them a message and see. Was just there and they had 3 or 4
@@Seancutshair Sweet thanks brother 👍
So what does the stretch bracket do?like whats the advantage opening the clipper more Is it better for fading?
It makes the gap between sections a little smaller. Easier to blend each step
@@Seancutshair oh okay do you prefer using the sc magnetic guards or would u use some other guards like wahl with the rebels
Hi guys what’s the difference between
Sc fusion and gamma italia blade
Which one is better
Thanks for answering
Gamma Italia isn’t a specific blade I think it says that on most of their blades. The fusion/faper is a cross between a fade blade and a taper blade
@@Seancutshair ok thank you very much for replying
Shall I get fusion or faper for my gamma bossted
@@shwannapoli9506wich blade did you get
Awesome upload just got myself some Gamma boosted can’t wait to use them
You’ll love them!
What lens are you using now? These newer vids looking super good.
Kit lens that came with my Eos R
Right after I watched this I bought them, and the MB grape guards. I've never done more than clean up my neckline, behind my ears, and my sideburns, I don't know much about clippers so seeing that this looks sleek and has a click lever made me instantly want to buy it and try to fade my own hair. also, I know many people prefer the faper blade. is the stock fade blade difficult to use or whats the difference, Any tips ??
Nice! And no the fade blade is fine lots of people love them. Just not my preference but you’ll be fine with it
I just got mine in the mail, I also purchased the faper blade. I put the stretch bracket on as well but for some reason when I go to put the blade on and tighten the screws all the way the right side doesn't move but the left side does as if I have the screw loose but I do not. Any suggestions, or reasons this may cause?
I’m not sure I’ve never had that issue but have seen others say the same thing
Hey Sean, i heard stylecraft made some changes to their new batch for the rebels a few months ago compared to when they released, what do u know about this? And whats the difference?
Answered in the other video
What changes?
@@Seancutshair which video and what changed with the rebel
Do you have to use the stretch bracket in order to use the faper blade properly or is it just preference? I just ordered my gamma and faper blade
Just preference
Do I have to use the taper blade if I use stretch bracket or can. I use stretch bracket with original blade
You can use any of the blades
with the stretch bracket on - does this make the 0.5 guard not needed?
Not necessarily not needed but it makes the open section longer
@@Seancutshair thanks
So what is the actual point of the stretch racket? There is a click system yes but how does this benefityiur cut better tham a regular racket would?
Fade and faper blades cut shorter so the stretch bracket extends the open clipper length and range of each guard
@@Seancutshair thank you for the reply bro, like you I prefer a taper blade, do you think there would be a benefit to removing the clicker since I'm using a taper blade?
What do you think is the best clipper for thicker/coily hair ?
These boosteds cut through anything
Dope video! Could you explain the difference between a staggertooth blade and a standard blade? Like why would I want a staggertooth?
I don’t use stagger tooth never really could see the benefit. They say it cuts softer almost like a thinning shear. Idk 🤷🏻♂️
If I’m using the instincts and the boosted is it necessary to add a fusion to my boosted or keep 1 with fusion and 1 with fade blade ?
That’s totally up to you. I don’t care for the fade blade so that’s why I always take it off
I have a question if you can answer it? I tied to put the bracket on and the lever screw just keeps turning, screw won’t come off, is this a defect or do you happen to have a solution for this, any help is greatly appreciated
If it’s an older clipper it had plastic threads instead of metal. It’s more than likely stripped. You could try using lock tite to hold it
Yeah it’s different from this video you have a pink piece inside and mine is white smh knew something was wrong, I appreciate you responding and keep up the great work and content, your a blessing brother!!
So I found the solution! The blade is wobbling due to the guard lever not being screwed tight enough, I know in the video Sean mentions to not screw it too tight as it will be difficult to push it up or down, which is true but the solution is that you used the RED lever as it has a slightly different shape to the black lever it allows it to tighten further without it rubbing against the side of the clipper body.
Long story short follow everything in the video above, but USE THE RED LEVER INSTEAD OF THE BLACK (it will not have a the spring or the little stop for the click like the black one or gold one does to begin with) and make sure it’s as tight as possible whilst still being able to manoeuvre between guard open/closed.
Thank you for the video bro @seancutschair
I bought a gamma boosted last week but it’s same as the wahl
Gets hot
Make sure it’s well oiled and adjusted correctly
Sean question, i have the wahl seniors cordless . literally the exact same way u showed us how to install the SC faper blade on the boosted. Would that way work on the wahl seniors? is it possible to get the SC faper blade on it?
Yes and yes 👌🏻
@@Seancutshair awesome , thanks man!
Does the stretch bracket opens up a 1 like the masters?
Idk about a 1 but it opens further than standard
is it still a good clipper w out a stretch bracket n the fusion blade?
Yes the clipper is great! I just like that set up
Sean, does the stretch bracket fit/work on TPOB troll?
I’m not sure about that
I have the gamma boosted, I’m new(cutting my own hair) but I’m having trouble with fading/blending in (I always see the lines and can’t blend it. Do you recommend taper or fusion blade? I mainly try to do blowout mid tapers. But yeah I would like to know what you think! Thanks in advance!
Either blade, I’d just stay away from the fade blade.
Not sure if you will reply to this and I apologize in advance for bothering you with this. First off appreciate you and I watched many of your unboxing and clipper trimmer reviews. After weeks I narrowed down I want a gamma boosted and style craft sabre. I live in Canada and am skeptical of every option I have come across for online options. Have you heard of barbersupplies canada and are they legit? Gamma won’t directly ship to Canada and neither will your suggested supplier. Thanks mate
Only one I’ve ever heard of is Modern Beauty. Hope that helps!
@@Seancutshair thanks for the reply! Unfortunately no Gamma. I am going to take my chances with the barbersupplies Canada! Appreciate you
@Seancutshair i have a problem with original bracker on my alpha. It looks like it is crooked a little. When you switch from lever completly closed to one point higher, only one side of a bracket moves. It is the side on the side of lever. When i was trying to squeeze it a little to fit bracket slider properly, it starts to move very resistive. I was also trying oiling it to perform a better slide. Is there any proper way to fix it? Any other brand does not have this problem. :(
Never had that problem so unfortunately I don’t know how to fix it. Hate to hear it you’re not the first
So I found the solution! The blade is wobbling due to the guard lever not being screwed tight enough, I know in the video Sean mentions to not screw it too tight as it will be difficult to push it up or down, which is true but the solution is that you used the RED lever as it has a slightly different shape to the black lever it allows it to tighten further without it rubbing against the side of the clipper body.
Long story short follow everything in the video above, but USE THE RED LEVER INSTEAD OF THE BLACK (it will not have a the spring or the little stop for the click like the black one or gold one does to begin with) and make sure it’s as tight as possible whilst still being able to manoeuvre between guard open/closed.
Thank you for the video bro @seancutschair
Can you put the stretch bracket on any clipper
No but most of the gamma clippers
So I found the solution! The blade is wobbling due to the guard lever not being screwed tight enough, I know in the video Sean mentions to not screw it too tight as it will be difficult to push it up or down, which is true but the solution is that you used the RED lever as it has a slightly different shape to the black lever it allows it to tighten further without it rubbing against the side of the clipper body.
Long story short follow everything in the video above, but USE THE RED LEVER INSTEAD OF THE BLACK (it will not have a the spring or the little stop for the click like the black one or gold one does to begin with) and make sure it’s as tight as possible whilst still being able to manoeuvre between guard open/closed.
Thank you for the video bro @seancutschair
Nice 👍🏻 I know a lot of people have that problem
I purchased my StyleCraft rebel and changed the stetch bracket . I have noticed the bracket is not very tight and because of that it caused problem that the blade may change position? Its a bit wobbly? Its easy to check you can try to turn it to left and right. I don't know if this is normall for clipers ? Is anyone know? Thanks
I never had that problem myself but have heard people talk about it
So I found the solution! The blade is wobbling due to the guard lever not being screwed tight enough, I know in the video Sean mentions to not screw it too tight as it will be difficult to push it up or down, which is true but the solution is that you used the RED lever as it has a slightly different shape to the black lever it allows it to tighten further without it rubbing against the side of the clipper body.
Long story short follow everything in the video above, but USE THE RED LEVER INSTEAD OF THE BLACK (it will not have a the spring or the little stop for the click like the black one or gold one does to begin with) and make sure it’s as tight as possible whilst still being able to manoeuvre between guard open/closed.
Thank you for the video bro @seancutschair
@@Alizendehdel996bro i have the Same Problem now with my new bought Gamma boosted, but its still loose. With red lever or black its the same and with the normal bracket too
Can you use this stretch bracket for non Gamma/SC clippers
Never tried it. It may fit a few of the similar style clippers
I would love to see it on a wahl senior that would be dope
Super helpful thank you !
Welcome!
Is the fusion and faper blade the same?
Yes
Gamma boosted/Stylecraft Rebel best in the game !!
Agreed!
Does the boosted get louder over time like the rebels??
Not near as bad but they’re more or less the same clipper
Why am i so lost where do i get all this?
The stretch bracket comes with the clipper
Would the stretch bracket fit a gold magic clip?
I’m not sure never tried it
Did u find out?
@@MirchoTheBarber na never found out but didn’t try it either
@@elGzuuu it should work cos gamma case is not very different than magic clip, i will order one bracket but i have to wait cos i cant get it in romania first
@@MirchoTheBarber bet lmk
Does it open up to a 1 or no ?
No idea
Have you had any issues on the blade being wobbly ? Like easy to move even when everything is tight. I’m having that issue now.
I have not but I’ve heard people mention that before
I had this issue on my rebel and then on a second rebel. Wanted to learn how to incorporate the stretch bracket but had to take it out cause it moved 👎🏾
Doesn’t do it on the SC ergo though if that matters
yup I have this issue. I can’t use my boosted because blade wobbles and the lever will vibrate loose. really disappointing
@@lefrogjames3993 just message them they got warranty on there clippers for almost every store unless you bought off eBay
What is the difference between the original and the blade that you put on , while doing skin fades etc
Faper blade is just somewhere in between the fade blade and taper blade. I don’t like the fade blade cause it’s cuts too harsh
iv noticed it does cut really harsh especially the shorter the number, 😢bare blade etc - even more so than the wahl senior fade blade - i may invest in the fusion blade and give that a try. do i have to change the cutting blade too?
Hi mate. What the difference between the deep tooth cutting blade and the shallow tooth cutting blade. And will I need to change the cutting blade if I put the faper blade on the boosted thanks man
I think the deep tooth is required if you want to use the stretch bracket. Just deeper grooves between the teeth to feed hair easier
@@Seancutshair thank you
For some reason the click won’t come off my lever. I’ve tried to use pliers to pull it or and it won’t come out
Depends on the clipper. Some are locked in. Some take a little more effort. Some just fall out lol
@@Seancutshair Gotcha, it was that small click on my gold and black Boosted levers
Wow this was made just in time i just got my first stylecraft clipper and it’s the mythic im in love with the look and black color of it
Nice!!!
Hey sean you should make a tutorial on how to use the straight razor the angles positions and all the goodies
Working on it gotta find the right model
Level3 milly clutch razor is good, I find the tomb45 razor holder to be too lightweight
They need one for the magic clip
I think it will fit a magic clip!
Does the stretch bracket make them open to a 1?
Idk about a 1 but it opens up much further
Thanks bro. You’re the inspiration 🫶
ill take your old boosted 🤷always wanted one!
My guy Tim got it already 🤷🏻♂️
@@Seancutshair damn him tim the next ones mine 😂
Sean 💯 percent
👊🏼👊🏼👊🏼
You still like the gammas more than babyliss (say no if yes)
😂😂😂
Would you say the booster with stretch bracket opens up the same as a jrl?
Idk the jrl’s well but it opens super far
You da man!
Can you put the stretch bracket onto a set of Wahl clippers, or is it just for SC/Gamma products?
Never tried it on Wahl it could fit 🤷🏻♂️
@@Seancutshair I just tried, and it does fit. You need to use the screws that hold the SC blade, as the Wahl screws are smaller threads.
Is it’s useful ??
Can u make a video about your fadeing system witth the stretch bracket pleaseeeeeeeeeeeeeeeeee :(((((((( :)))))))))))) :DDDDDDDDDDDDDD
Everyone of my tutorials lately is with the boosted and stretch bracket 👌🏻
Would you recommend buying the style craft rebels, or the gamma boosted?
They’re pretty much the same but I use the boosted mainly!
Faper blade not as thin as fade blade
Why was it so greasy out of the box. Strange
Sometimes stuff comes in like that
Luar biasa..pengen sekali.. bossku..