Beautiful work! Beautiful results! I had your suspension lift kid done on my 2008 Chevy Colorado back in the day. Had to sell the truck for financial reasons, but your kit is top notch.
I would say the sub frame was cut & a bolt on kit had to be used for lift this size, & one of the common cons of having any lift that's 3" & above is the drive line will have a much different pitch to it causing wear & tear on the U joints having to replace them every 6 months & generally will always have some vibrations cause of the drive line pitch is off.
@@DeepSnowRideryes exactly, that’s what I’ve found as well . I did the 3.5 Rough country 8 stage , vertex kit . With General grabber x3’s . Perfect daily driver!!!
@@gregorioc9539 I was just too cheap for them and I'm not going to be heavy very often.... The stock springs are still in great condition so will upgrade in the futures. The V2 shock up grade are by far way better than the n3. I really don't even feel the back....
I have this lift kit installed on my 2023 Tacoma by professionals and now when I go from 0 to 30mpg I have small vibrations on the front, do you know what might be?
i have a 2022 tacoma trd with the 16 inch wheels and i want to keep those and i want this same lift kit size whats the max tire size i can run without running
Beautiful work! Beautiful results! I had your suspension lift kid done on my 2008 Chevy Colorado back in the day. Had to sell the truck for financial reasons, but your kit is top notch.
Some advice next time. Put the camera a lot more closer, so people can view the work that's being done .
So why won't this kit work on 2wd. One of your reps said it won't. They never explained why though
What size wheel spacers did the customer Supply I'm looking to do the same to my truck
I’m assuming the pics were taken before an alignment, the truck looks like it has positive camber
Can this lift kit be installed on a 2WD Tacoma TRD Sport or does it have to be 4WD?
Soon, baby soon.
I would say the sub frame was cut & a bolt on kit had to be used for lift this size, & one of the common cons of having any lift that's 3" & above is the drive line will have a much different pitch to it causing wear & tear on the U joints having to replace them every 6 months & generally will always have some vibrations cause of the drive line pitch is off.
3.5” lift is the max a 3rd gen Tacoma can get before a frame cut comes into play.
@@DeepSnowRideryes exactly, that’s what I’ve found as well . I did the 3.5 Rough country 8 stage , vertex kit . With General grabber x3’s . Perfect daily driver!!!
@@Aglassact77 is it worth it to lift them. Im thinking of it.
So with the 3.5 lift kit, it will clear 33x12.5 tires?
yes.
does this lift kit also make the truck level?
Nice! Really cool lift.
Are this lift for 4x4 only?
Can i use same kit for my sr5 2wd?
I just put this on my 2019 Tacoma as well but did not get the new leaf springs I got the block and the V2 shocks for the rear... Looks great
it’s been a couple weeks, how’s it ride? & why didn’t you get the leaf springs ?
@@gregorioc9539 I was just too cheap for them and I'm not going to be heavy very often.... The stock springs are still in great condition so will upgrade in the futures. The V2 shock up grade are by far way better than the n3. I really don't even feel the back....
Would you recommend changing the the needle bearings for Ecgs with the bushing style without needle bearings and new seals at the time of the lift
I have the exact lift on my 21 off road. 6 speed manual ☺️
After the lift installed. Did you get an humming noise or grinding like noise. Not sure if it’s the axle compartment or what.
I have this lift kit installed on my 2023 Tacoma by professionals and now when I go from 0 to 30mpg I have small vibrations on the front, do you know what might be?
driver side cv joint needle bearing you need to get the ECG bushing and have that replaced
one way to test if that is the issue, put it in 4 wheel drive and see if there is no vibrations
How much lift was actually achieved by the new rear leaf springs?
What size spacers? Thank you. I have 1.25in on mine atm. And Im planning to get this lift for my 2020 OR.
Hey what brand spacers do you have and what are your thoughts on them
Very Nice
Many place i saw people only could lift for 4*4
i have a 2022 tacoma trd with the 16 inch wheels and i want to keep those and i want this same lift kit size whats the max tire size i can run without running
rubbing*
Do you guys know what are the alignment aspects for this lift kit?
What kind of tires are on the truck?
What's the weight rating for the front springs
How big wheel spacers?
They were not marked, but I'd say 1.25 inches, 1.5 should work just as well.
What would the cost of labor be like for this this kit?
Shops I've asked are about 1,000 for labor. It's unbelievable
@@Its_about_that_timeyeah they are scumbags. Send them this video and ask them how they take any longer
was quoted $400
525 for me
Clearance the brace? Does the diff drop kit require cutting?
Yes there is a brace that you will need to cut to allow the diff to drop... Very simple
Yea let's shoot a video and not show any close up instructions 😂
First 😎🤘🏻🇺🇸
How much did you lift the rear?